A Gatewood company - serving Paradise, NV
Gate Parts & Welding in Whitney, NV | Gatewood Fence & Gate Paradise - Gatewood Fence & Gate Paradise

Gate Parts & Welding in Whitney - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Whitney

If your driveway gate is dragging, sagging, or stuck half-open in Whitney, we can help. We repair and weld gates right where they sit, and our Gate Parts & Welding team handles hinge replacement, post replacement, rail repair, and custom welding on the spot. Most visit requests in Whitney get a callback the same day, with free estimates and pricing agreed before any work starts. Call (888) 292-7536 and a live person answers, day or night.

Metalworker performing custom gate fabrication and professional welding services on a metal gate in Whitney, NV

Call (888) 292-7536

Why Gatewood Fence & Gate Paradise Is Whitney’s Preferred Gate Parts & Welding Company

We’re locally owned and owner-operated, and our technicians have up to 25 years of experience. That matters in a community like Whitney, where the same builder-grade gates have been baking in the desert sun since the 1990s. We know the failure patterns on these tract gates because we’ve seen them across the 89122 ZIP and the neighborhoods off the 89122 corridor again and again. When you call, a live person picks up around the clock – not a voicemail, not a call center three states away. And every job comes stamped in writing with our 90-Day Done Right Promise: if it’s not done right, we make it right, one call brings us back. We repair what other companies would rather replace, and we weld on site so your gate stays in your driveway instead of disappearing onto a truck. If a written estimate has you uneasy, we’ll give you a free second opinion on it.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Whitney

We focus on the repairs that actually keep Whitney tract gates working: the hinge post, the footings, and the rails. Here’s what that looks like.

Hinge Replacement

A gate sags in the hinge post, not in the middle – and that’s where we start. On Whitney’s 1990s tube-steel gates, hinges seize from blowing dust and the weld at the hinge often rusts thin. We cut out the failing hinge set, reset it square, and weld a new set that matches the original profile so it passes HOA review.

Hinge Replacement

Post Replacement

When a hinge post has loosened in saturated soil after a monsoon or flash flood, welding a new hinge onto a leaning post just means you’ll fix it twice. We reset the footing, plumb the post, and correct the sag before the gate goes back on. That’s the step that makes a Whitney repair last through the next wind event.

Post Replacement

Rail Repair

A rusted bottom rail can be repaired without replacing the whole gate. We cut out the rusted section, weld in new tube steel, and treat the finish so it holds up against the Mojave sun. In the shoulder-to-shoulder tracts, matching the original rail profile and color keeps your unit consistent with the row.

Rail Repair

Custom Welding

Sometimes a gate needs a bracket, a reinforcement, or a repair to the operator’s mounting arm – especially on older LiftMaster and FAAC operators that get racked by wind load on solid infill gates. We weld it on site, in your driveway, so the gate never leaves Whitney.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 292-7536

Trusted Brands We Service in Whitney

We’re certified to service nine major gate brands, and in Whitney you’ll most often see us working around LiftMaster and FAAC operators on these older tract gates, plus DoorKing and Elite on the access-control side. We don’t claim to stock parts on a truck. We diagnose the brand and model, order what’s needed, and turn the repair around fast. On a gate that’s 25 to 30 years old, getting the right part the first time matters more than speed alone.

Professional welder grinding metal joints during custom gate repair work in Whitney, NV
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Whitney Homes

  • Wind load bending hinges. Solid infill gates catch the gust and the hinge takes the load. On older LiftMaster and FAAC units, the operator arm often racks right along with it.
  • Saturated ground loosening footings. After a flash flood, the hinge post leans and the gate sags. The footing, not the panel, is the fix.
  • Blowing dust grinding hardware. Grit works into hinges, rollers, and latches until they seize. Regular cleaning buys you years.
  • Desert sun oxidizing finishes. Builder-grade paint oxidizes fast here, and that’s how bottom rails rust through and replacements start mismatching the row.

Pricing for Gate Parts & Welding in Whitney, NV

A typical hinge replacement in Whitney runs $150 – $350 per gate. Post replacement with a reset footing usually lands $300 – $650, and a rusted bottom rail repair runs $180 – $450 depending on how much tube steel has to be cut out. Custom welding and bracket work starts around $125. Prices depend on gate size, how far the footing has moved, and whether the finish needs matching for HOA. We quote and agree the price before any work begins – no surprises at the door. Standing offers: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.

We Also Serve Cities Near Whitney

We also work in Whitney and the surrounding communities: Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re just outside the 89122 line, call and we’ll tell you whether we cover your street.

Serving Whitney, NV – Our Local Coverage Area

We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Whitney

Why Whitney Chooses Gatewood Fence & Gate Paradise

We set the standard for gate parts & welding in Whitney.

30-60 Min Response

Fast dispatch across Whitney. Same-day and after-hours emergency service available.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Whitney

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Whitney - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Whitney Customers Say

Trusted by homeowners across Whitney and surrounding areas.

★★★★★

"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."

Otis Redmond
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."

Judith Stallworth

Ready for Gate Parts & Welding in Whitney?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and here with fast after-hours help in Whitney.

(888) 292-7536

Request a Free Estimate in Whitney

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch