Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Parts & Welding for Paradise Homeowners
When a hinge gives out or a weld splits, the gate can drag, drop, or stop latching altogether. The fix usually lives in one worn part, not a whole new gate. Our technicians have up to 25 years of experience with the parts that fail most on desert gates, and we weld on site so your gate never leaves the driveway. We’re owner-operated, calls get answered by a live person around the clock, and same-day repair is often possible in Paradise when you call early. Reach us at (888) 292-7536.
What Our Gate Parts & Welding Service Includes
Every repair starts with a straight look at what’s actually broken. Here’s what we handle most often in Paradise.
Hinge Replacement
Hinges do the heaviest lifting on any swing gate, and they’re the first thing to wear when the steel is older or the gate has been dragging. You’ll know they’re shot when the gate sags in the opening, scrapes the ground, or wobbles even after you tighten the bolts. We cut out the worn hinge, weld a new one square to the post, and check the swing before we leave. A gate sags in the hinge post, not in the middle, and that is where we start.

Post Replacement
When a hinge post rusts through or loosens in the ground, no amount of hinge work will hold the gate straight. You need a new post when the gate leans, the gate won’t close flush, or you can see corrosion at the base where it meets concrete. We remove the old post, set the new one plumb, and weld or bolt the gate back to it. Fix the panel without the post and you’ll fix it twice.

Rail Repair
Rails are the horizontal bars that carry the gate’s weight and keep the frame rigid. They crack at the welds, bow in the middle, or rust through from the inside after years of sun and irrigation runoff. We cut out the damaged section, weld in a new rail matched to the frame, and check the whole frame for stress the broken rail was hiding. Winter temperature swings in Paradise work rails hard, and a bowed rail usually means a rusted section underneath.

Custom Welding
Sometimes the part isn’t on a shelf. Odd-size gates, decorative ironwork, driveway gates that need reinforcement, and brackets for a new opener are all jobs for custom welding done in place. We bring the welder to your gate, measure the opening, and build to fit. That keeps the gate hung and aligned instead of hauling it off for days.
Gate Rollers
Sliding gates ride on rollers, and when a roller seizes or flattens, the gate drags, jumps the track, or strains the opener motor. You’ll notice grinding as the gate moves, a bump in the track, or the gate drifting out of line with the post. We replace the rollers, true up the track, and test the full travel by hand before we run the motor.
Latch & Lock
A latch that won’t catch or a lock that sticks is a security problem, not just a nuisance. Alignment shifts after a post settles, a hinge wears, or the gate frame moves in heat, and the latch stops meeting the strike cleanly. We realign the gate, fit a new latch or lock, and confirm it catches every time from both sides before we call the job done.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Parts & Welding
We work on the equipment most Paradise properties already have. On DoorKing access systems, the mounting brackets and gate-frame hardware take the wear, and we know where those connections loosen over time. With LiftMaster operators, we look at the arm and chain hardware that pulls against the gate frame, since a bent bracket there throws off the whole swing. Mighty Mule and Elite gates turn up often on residential driveways, and we match hinge, roller, and latch hardware to what those frames actually need.
Every brand wears in its own way, and knowing the difference saves you from replacing parts that are still good. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether you have DoorKing or any other make, we can help you get it swinging right again.
Signs You Need Gate Parts & Welding Right Now
Some failures are obvious. Others start small and get expensive. Here’s what to watch for:
- The gate sags or drags the ground. That usually points to worn hinges or a loosened hinge post. Left alone, the dragging gate grinds down the frame and strains the opener until both fail.
- You see cracks or rust at the welds. A hairline crack spreads every time the gate opens and closes. Catching it with a quick weld repair is far cheaper than waiting for the frame to split.
- The latch won’t catch or the lock sticks. A gate that won’t secure is a real security gap, and it usually means the gate has shifted out of alignment. We reset it and fit the hardware so it catches cleanly every time.
- The gate is hard to open by hand. If it takes effort to swing, a hinge or roller is binding. That friction wears the opener motor and shortens its life, so it’s worth checking early.
- The opener runs but the gate barely moves. That can be a stripped gear, a bad arm connection, or a roller that’s seized. It’s not always the motor, and a proper diagnosis saves you from replacing equipment that still works.
Our Gate Parts & Welding Process – Step by Step
- 1
You call, a live person answers. Tell us what the gate is doing and what kind of gate you have. We ask enough questions to bring the right parts and tools on the first trip. No voicemail, no callback queue.
- 2
We inspect and diagnose in person. We check the hinges, post, frame, rollers, and latch by hand, test the swing, and look at the welds for stress cracks. You get a clear answer on what failed and why.
- 3
We walk you through the fix and the price. You see the worn part, hear what we recommend, and get an upfront price before any work starts. No surprises at the door.
- 4
We weld and repair on site. The gate stays hung in your driveway while we replace hinges, cut and weld rails, reset posts, or fit new rollers and latches. On-site welding keeps your gate aligned the whole time.
- 5
We test the gate and back the work in writing. We open and close the gate, check the latch, run the opener, and confirm it all works before we leave. Every job carries the 90-Day Done Right Promise stamped in writing. If it’s not right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Paradise?
Most gate parts and welding work in Paradise lands in a range you can plan for. A hinge replacement typically runs $150 – $350 depending on gate size and how much rust is in the post. Rail repair and hinge-post welding generally fall between $200 and $500, since the welding and realignment take more time. Roller and latch repairs are usually the smaller jobs, often $100 – $250. Custom welding is quoted by the job once we see the gate.
Price depends on the gate material, how much corrosion we find, whether a post needs resetting, and how accessible the gate is. You avoid overpaying by fixing the failed part before it damages the frame or the opener. Every estimate is free and upfront, and the price is quoted and agreed before any work starts. We also take $40 off any repair over $200.
Gate Parts & Welding Near Paradise – Our Service Area
We serve homeowners across the east valley and the surrounding towns. Besides Paradise, we regularly work in Winchester, Whitney, Spring Valley, Enterprise, Henderson, and Las Vegas, plus outlying areas like Boulder City and Sandy Valley. Response times vary by location and workload, so call early in the day for the best shot at same-day service. You can also learn more about what we do.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Parts & Welding in Paradise
It’s repairing the individual parts that make a gate work by replacing or welding them in place. That covers hinges, posts, rails, rollers, latches, and locks, done on site so your gate stays hung. Rather than swapping the whole gate, we fix the part that failed.
Most repairs take a single visit, often one to three hours depending on the job. A hinge or roller swap is quick, while a post replacement or rail weld takes longer. We give you a realistic window when you call, and we show up in it.
Most repairs run between $100 and $500 depending on the part and the condition of the gate. Common jobs like hinge replacement start around $150, and post work runs higher. Call (888) 292-7536 for an exact quote – estimates are free, and we also take $40 off repairs over $200.
Yes. We’re certified to service nine major gate brands, including LiftMaster and DoorKing, along with FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. We know where each brand’s hardware tends to wear and match the repair to the equipment.
Yes. A live person answers the phone around the clock, and we handle same-day and emergency calls in Paradise whenever we can fit them in. Call (888) 292-7536 and tell us what’s happening with the gate.
Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back and we make it right, plainly and without runaround.
Clear the area around the gate and make sure we can reach both sides, and if the opener has power, know where the disconnect is. Let us know up front about dogs or locked gates. That’s it. We handle the rest.
Schedule Your Gate Parts & Welding Service in Paradise Today
If your gate is sagging, dragging, or won’t latch, don’t wait for it to get worse. Call Gatewood Fence & Gate Paradise at (888) 292-7536 for a free, no-obligation estimate. A live person answers around the clock, the price is agreed before any work starts, and every job is backed by the 90-Day Done Right Promise. Let us fix the part that failed and keep your gate swinging right.
Written by the team at Gatewood Fence & Gate Paradise.