Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Sunrise Manor
If your driveway gate is dragging, sticking, or won’t latch after an irrigation turn, we can help. Sunrise Manor residents call us because we know this side of the valley: the wide rural entrances up toward Sunrise Mountain, the older tract-home swing gates on the flats, and the way the heat and alkaline runoff chew through hardware here faster than anywhere else. Our Gate Parts & Welding team handles on-site welding, post resets, and hinge work so the gate stays in your driveway instead of riding off on a truck. Call (888) 292-7536 for a free estimate.

Why Gatewood Fence & Gate Paradise Is Sunrise Manor’s Preferred Gate Parts & Welding Company
We’re the gate shop people in Sunrise Manor come back to because the name is on the shop and the shop is down the road. That’s the oldest accountability there is. When someone quotes you a number on the phone and then wants a different number at the door, you remember it. Every job we do carries the 90-Day Done Right Promise in writing – if it’s not done right, we come back and make it right.
Sunrise Manor customers tell us the same thing: they want a face they’ll see again at the hardware store. We answer the phone with a live person around the clock, and our technicians have up to 25 years of experience welding and resetting gates on this side of the valley. When a gate fails up on the slope, we know why before we get out of the truck.
Response time to Sunrise Manor is quick, and we work the whole ZIP of 89110. For urgent repairs like a gate hanging off a broken hinge, that usually means the same day. Metered jobs like custom welding get a free measure and a written price so you know what you’re signing before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Sunrise Manor
We lead with post replacement, custom welding, and hinge work here, because that’s what the terrain and the weather break most often. Each job is quoted and agreed before we start, and we don’t swap parts that don’t need swapping.
Post Replacement
A gate sags in the hinge post, not in the middle – and that’s where we start. Around Sunrise Mountain’s foothills, alkaline irrigation runoff loosens the soil around post footings until steel gates start dragging and won’t close flush. We dig out the old footing, reset the post in proper concrete, and re-level the gate so the latch and rollers line up again. Fix the panel without the post and you’ll fix it twice.

Custom Welding
We weld on site so the gate stays in your driveway. Wide acreage and farm gates out past the subdivisions often need a reinforced corner, a new gusset, or a cracked frame stitched back together – and hauling it into town isn’t practical. Our welders work in your driveway and hand you back a gate that swings true.

Hinge Replacement
Spring irrigation turns and the year’s first 110°F stretch bake grit into hinge pins until the gate welds itself shut. We replace seized and pitted hinges with heavy-duty hardware sized to the gate’s weight and span. Then we check the whole swing so the fix actually holds through the next dust storm.

Rail Repair
Wooden gate rails warp and split under strong UV, and steel rails bend when a gate catches on a misaligned track. We repair the rail and trace it back to the real cause – a loose hinge post or a sunken footing – so the fix doesn’t come undone. Repaired rails are re-welded or re-set and leveled against the post line.

Trusted Brands We Service in Sunrise Manor
We’re certified to service nine major gate brands, including DoorKing, LiftMaster, and Mighty Mule, plus FAAC, BFT, Linear, Viking, Ghost Controls, and Elite. For a wide rural entrance or a slide gate on a tract home, we handle the operator, the rack and pinion, the safety photocells, and the keypad entry alongside the welding and parts repair. We don’t stock every part – we diagnose the gate and order what it needs, which is usually faster than chasing the wrong replacement. That’s the turnaround Sunrise Manor homeowners count on.
Common Gate Parts & Welding Problems We See in Sunrise Manor Homes
- Alkaline runoff on gate bottoms and latch posts. Spring flood irrigation along the Sunrise Mountain foothills spreads mineral water that settles on the bottom rail and latch post, then the first hot stretch bakes it into a crust that seizes hinges. Gates stick or won’t close flush right after an irrigation turn.
- Ground-driven operators that warp and bind. On winter freeze nights, ground-driven automatic operators warp and drag, and wind-driven dust packs into slide-gate tracks and rollers. A gate that worked fine in October can jam in February.
- Sagging gates from quietly loosened footings. UV and 105°F-plus heat dry out hinge lubricant while the footing moves with the soil. The panel looks fine; the hinge post is the problem.
- Seized keypads and hot-weather failures. Powder coat fades and plated hardware pits under strong UV, and the first 110°F stretch often leaves keypad entries and access hardware sluggish or dead. These show up alongside the welding repairs.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Sunrise Manor, NV
Here’s roughly what a job runs in Sunrise Manor. A typical hinge replacement runs $150 – $325 per hinge set, and post replacement for a driveway gate runs $400 – $900 depending on footing depth and whether the post sits in the harder foothill soil. Rail repair and re-welding usually lands $200 – $600, and a custom-fabricated or reinforced gate frame runs $600 – $1,500 or more for a wide acreage span. What moves the number: how far the footing has moved, whether the gate needs custom welding versus a standard part, and post depth. Your price is quoted and agreed before any work starts – no surprise at the door. Standing offers include $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Estimates are free; call (888) 292-7536.
We Also Serve Cities Near Sunrise Manor
Sunrise Manor sits close to a lot of neighbors, and we serve them too – Sunrise Manor residents, along with homeowners in nearby Whitney, Winchester, Las Vegas, and North Las Vegas. If your gate is on this side of the valley, the drive is short and the answer is quick. Call and we’ll get you scheduled.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Sunrise Manor
Your gate sags because the hinge post footing has loosened, not because the panel is worn. Around the Sunrise Mountain foothills, alkaline flood-irrigation runoff works into the soil and lets the post shift, so the gate drags and stops latching. Resetting the post and re-leveling the gate fixes it – call (888) 292-7536 for a free estimate.
Yes. Many long rural entrances around Sunrise Manor run solar-powered operators where mains power isn’t practical. We test the solar operator, rack and pinion, safety photocell, and keypad against the gate’s actual travel so it cycles reliably through dust and heat. Schedule a free measure and we’ll give you a written price.
UL 325 is the safety standard requiring automatic gates to have entrapment protection – photocells, safety edges, or loops – so the gate stops or reverses when something is in its path. On Sunrise Manor acreage gates, that protection matters more with wide spans and livestock nearby. We check it as part of every operator repair. Call for a free second opinion on any written estimate.
Wind-driven dust packs into slide-gate tracks and rollers, then the dry heat bakes it in. That’s why a slide gate that ran smooth in calm weather jams a day or two after a dust storm. We clear the track, inspect the rollers, and re-lubricate with hardware that holds up in this climate. Call (888) 292-7536 to get it moving again.
It is. The first 110°F stretch here fades powder coat and pits plated hardware, and keypad entries and access hardware often go sluggish or dead right after. We diagnose the entry system and the gate travel together so the fix holds. Estimates are free – give us a call.
Get Your Sunrise Manor Gate Fixed Right
Whether it’s a dragging swing gate on the flats or a wide, solar-powered acreage entrance up the slope, we know why it’s failing and how to fix it. Our technicians have up to 25 years of experience, the 90-Day Done Right Promise is in writing on every job, and a live person answers the phone around the clock. Call (888) 292-7536 for a free estimate and we’ll get you on the schedule.
Written by the team at Gatewood Fence & Gate Paradise.