A Gatewood company - serving Paradise, NV
Gate Parts & Welding in Las Vegas, NV | Gatewood Fence & Gate Paradise - Gatewood Fence & Gate Paradise

Gate Parts & Welding in Las Vegas - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Las Vegas

A sagging driveway gate, a hinge that pulls loose from the block wall, a welder who never shows: these are the calls we get from Las Vegas homeowners every week. We’re Gatewood Fence & Gate Paradise, and gate parts and welding is what we do, whether it’s a hinge replacement in a 1990s stucco tract home or custom welding on an ornamental steel leaf that the sun has been baking for two decades. We know the valley’s block walls, sun-baked finishes, and wind-whipped side yards because this is where we work. Call (888) 292-7536 and a live person picks up, day or night, with a free estimate on the spot.

Metalworker performing custom gate fabrication and professional welding services on a metal gate in Las Vegas, NV

Call (888) 292-7536

Why Gatewood Fence & Gate Paradise Is Las Vegas’s Preferred Gate Parts & Welding Company

Las Vegas homeowners call us because they’ve already been through the other kind of outfit: the one that quotes a number over the phone and charges a different one at the door. We quote and agree on the price before any work starts. Every job carries our 90-Day Done Right Promise in writing, and if something isn’t right, one call brings us back, no runaround.

Our technicians have up to 25 years of experience with the gates and operators that fill Las Vegas neighborhoods, and we’re certified to service nine major brands, from LiftMaster openers to DoorKing access hardware. We’re a repair-first shop: if a hinge replacement and a weld will get another ten years out of a gate, that’s what you get, not a sales pitch for a whole new gate. We don’t carry parts in a truck or run out of a warehouse, because the local pro who arrives brings what the job actually needs, and we tell you what’s available up front.

Calls are answered by a live person around the clock, not a voicemail or a call center three states away. When you describe a dragging gate over the phone, you’re talking to someone who can picture it.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Las Vegas

Hinge Replacement in Las Vegas

Most gate hinge failures in Las Vegas start in the post, not the hinge plate. UV-hardened pivot bushings and a footing that has lost its alignment lock the hinge up, and the hinge then yanks the block anchor loose. We replace hinges, re-shim block anchors, and weld reinforcement plates so the fix holds through the next monsoon season.

Hinge Replacement in Las Vegas

Post Replacement in Las Vegas

When the hinge post itself is compromised, welding plates onto it just makes you fix the same gate twice. We cut out the failed post and set a new one, aligning it to how the wall actually sits, which in northwest valley subdivisions on shared CMU block walls is rarely where it was at install. If the post is sound and only the hardware has drifted, we say so.

Post Replacement in Las Vegas

Rail Repair in Las Vegas

Monsoon microbursts and dust-storm gusts twist unsupported gate leaves, bending rails and pulling anchors out of block walls. We straighten and re-weld bent rails on site in your driveway rather than hauling the gate off, so you’re not looking at an open gap in the fence for a week.

Rail Repair in Las Vegas

Custom Welding in Las Vegas

We weld in the driveway, not in a shop across the valley. Ornamental steel leaves that are still structurally sound but need repaired welds, new brackets, or reinforcement plates get welded on site. When a gate is beyond welding, we’ll tell you plainly that replacement is the cheaper answer, and quote it before anything is ordered.

Latch and lock repair and gate roller replacement fall under the same Gate Parts & Welding work, and we can combine them into one visit.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 292-7536

Trusted Brands We Service in Las Vegas

We’re certified to service nine major gate brands, including LiftMaster operators, Elite slide and swing operators, and Mighty Mule residential systems. In Las Vegas, the most common failure we see in older operators is an obsolete control board that has cooked in a 110°F+ summer and now operrates erratically or not at all; sometimes it isn’t made anymore. We tell you honestly what’s replaceable and what isn’t, and quote the fix before we start.

Professional welder grinding metal joints during custom gate repair work in Las Vegas, NV

Common Gate Parts & Welding Problems We See in Las Vegas Homes

  • UV-baked powder-coat. Years of desert sun break down the finish on ornamental steel gates, and the rust that follows binds hinges and latches. West-facing gates in Las Vegas are hit hardest.
  • Monsoon-racked leaves. A microburst gust racks an unsupported gate leaf, bending rails and pulling anchors loose from a shared block wall. It’s often a wall-anchor job as much as a gate job.
  • Obsolete control boards. Older LiftMaster and FAAC operators fail from heat and dust, and the board that runs them is often no longer available, leaving you deciding between retrofit and a new operator.
  • Wandering posts. In northwest Las Vegas neighborhoods, gates hung on shared CMU block walls settle independently from the house slab, so a gate that was square at install goes out of plumb within a few summers.

Why Desert Heat and Block Walls Change the Repair in Las Vegas

Las Vegas gate trouble is a sun and wind story, not a rain and rust story. The extreme dry heat warps steel and wood, bakes the finish off, and hardens the grease in pivot bushings until a gate starts dragging. In the northwest valley, a lot of driveway gates are hung on shared CMU block walls that settle at a different rate than the house slab. That’s why so many gates go out of plumb after a few summers and need re-shimming at the block anchors, not just a hinge turn. A typical call is a fifteen-year-old swing gate in an HOA subdivision that drags because the hinge post shifted in the block wall. The usual cause is UV-hardened bushings and a footing that lost its alignment, and a qualified local pro will re-shim the anchors and replace worn hinges. If the post itself is compromised, replacement is often the cheaper long-term answer.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Parts & Welding in Las Vegas, NV

We quote and agree on the price before any work starts, so the number you hear is the number you pay. A typical hinge replacement in Las Vegas runs $150 – $350 per leaf, and re-shimming block-wall anchors while we’re there adds $75 – $200. Post replacement runs $400 – $900 depending on the post and how it’s set into CMU block. Rail straightening and re-weld work runs $200 – $500, and custom welding on site runs $125 – $250 per hour with a one-hour minimum. What moves the price is the material, how far off-plumb the gate is, and whether the repair turns into a wall-anchor job. Written estimates are free, and we’ll give you a second opinion on any other estimate at no charge.

We Also Serve Cities Near Las Vegas

We work the whole valley, not just Las Vegas proper. That includes Las Vegas neighborhoods and the surrounding communities of Winchester, North Las Vegas, Sunrise Manor, and Paradise, plus the ZIP areas 89165, 89166, 89162, and 89111. If you’re just outside one of these, call and ask, we’ll tell you straight.

Serving Las Vegas, NV – Our Local Coverage Area

We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Las Vegas

Get a Free Gate Parts & Welding Estimate in Las Vegas

If your gate is dragging, a hinge is pulling loose, or a weld has given out, call (888) 292-7536 for a free estimate. A live person answers around the clock, we quote and agree on the price before any work starts, and every job carries the 90-Day Done Right Promise in writing. We repair what other shops want to replace, and we weld on site so your gate stays in your driveway. Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county.

Written by the team at Gatewood Fence & Gate Paradise.

Why Las Vegas Chooses Gatewood Fence & Gate Paradise

We set the standard for gate parts & welding in Las Vegas.

30-60 Min Response

Fast dispatch across Las Vegas. Same-day and after-hours emergency service available.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Las Vegas

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Las Vegas - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Las Vegas Customers Say

Trusted by homeowners across Las Vegas and surrounding areas.

★★★★★

"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."

Otis Redmond
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."

Judith Stallworth

Ready for Gate Parts & Welding in Las Vegas?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and here with fast after-hours help in Las Vegas.

(888) 292-7536

Request a Free Estimate in Las Vegas

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch