Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Whitney
Gate installation in Whitney, NV usually runs $2,400-$6,800 for a standard driveway gate and $6,000-$18,000 or more for a custom ornamental gate with an underground operator, intercom, and camera entry. We schedule a free on-site measure, put the number in writing, and the price doesn’t move once the work starts. Whitney is a small unincorporated community, and we know the tract layouts off the 89122 corridor and the shared-block-wall rows where a new gate has to match the neighbors. Call (888) 292-7536 and a live person picks up, day or night. You’ll get a written estimate, not a phone number that changes at the door.

Why Gatewood Fence & Gate Paradise Is Whitney’s Preferred Gate Installation Company
Whitney homeowners between 50 and 70 have usually been burned before. A national outfit quotes one price on the phone, then a different one at the driveway. We work the opposite way: a free measure, a written price agreed before anything gets ordered, and a name you can look up. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our technicians have up to 25 years of experience, and every person who shows up is background-checked and uniformed. We’re certified to service nine major gate brands, so whether the property already runs a DoorKing entry system or a Mighty Mule swing operator, we can match the new gate to the hardware that’s there instead of selling you a whole new system. Every job carries the 90-Day Done Right Promise in writing, and one call brings us back if something isn’t right.
Whitney is tight. Tracts sit shoulder-to-shoulder along shared block walls, so a gate that’s off-style is visible from a whole row of houses, and an HOA architectural-review committee will flag it fast. That’s exactly where local knowledge pays off, and it’s why we measure against the neighboring units before we order a single panel.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Whitney
Driveway Gate Installation in Whitney
Most Whitney driveway gates start with a failed original. The builder-grade tube-steel units from the 1990s are now failing in the same ways at the same time, and a lot of homeowners assume replacement is the only path. Sometimes it is. But we check the hinge post first, because a gate sags at the post, not in the middle. When a real replacement makes sense, we fabricate or spec a driveway gate to fit the existing block-wall opening and the HOA-approved color.

Swing Gate Installation in Whitney
Swing gates are the default on Whitney’s small residential lots, and getting the geometry right matters more than the panel itself. We set the posts to the correct depth for desert soil, hang the gate so it clears the ground through the temperature swings, and align the latch. If an operator goes on, we check the loop detector and safety photocell so the gate reverses as it should.

Pedestrian Gate Installation in Whitney
Side-yard and walk-through gates on Whitney’s tract homes take a beating from blowing dust and grit. New pedestrian gates get heavy-duty hinges and a latch that won’t seize after a summer of dust. We match the finish to the driveway gate so the property reads as one unit to the HOA.

Sliding Gate Installation in Whitney
Sliding gates show up on Whitney properties with wider driveways and on security-gate setups. We set the track and the operator to run level, because a slide gate that binds will wear its rack and pinion out in a couple of seasons under this sun. When a worn rack is the only real problem, we replace the rack, not the whole gate.
Trusted Brands We Service in Whitney
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Whitney installations, the brand usually matters most when we’re matching a new gate to an operator already on the property – a DoorKing entry system on a security gate, an Elite or LiftMaster swing operator on a residential driveway. We don’t warehouse parts, so we don’t promise something off a shelf. What we do is order the exact hardware for your gate and get it installed on the schedule we agreed to, without padding the ticket with parts you don’t need.

Common Gate Installation Problems We See in Whitney Homes
- Sagging gates from failed hinge posts. Rust and soil shifting through desert temperature swings pull the original post footing out of true. Reset the footing and upgrade the hinge, and the gate hangs straight again.
- Seized latches and hinges from dust and grit. Blowing dust packs into exposed hardware and locks it up. Cleaning, lubricating, and aligning the latch brings it back without a replacement.
- Operator failure from baked wiring and worn rack and pinion. Years of intense UV cook the wiring and wear the rack on slide gates. We check the operator, the loop detector, and the safety photocell before recommending anything new.
- HOA mismatches across shared block walls. In Whitney’s tightly packed tracts off the 89122 corridor, a replacement gate has to match the approved style and color of the neighboring units, and that approval varies between adjacent HOAs. Getting the design right up front saves a flagged inspection.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Whitney, NV
Here’s the honest picture for Whitney’s market. A typical standard tube-steel or basic wrought-iron driveway gate install runs $2,400-$6,800, depending on width, material, and whether a new operator goes on. A pedestrian gate usually lands $900-$2,600. Sliding gates with a track and operator run $3,800-$9,500. Custom ornamental gates fabricated to an HOA-approved design, with an underground operator and an intercom and camera entry package, run $6,000-$18,000 or more, because the precision a heavy bespoke gate needs to run quietly for years is in the fabrication and the setting, not the panel. What moves the number: gate width, material, operator and access-control hardware, and whether the existing post footing can be reused. A free on-site measure turns all of that into a written price you agree to before we order a thing.
Standing offers apply here and they don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Whitney
Whitney sits close to a lot of the valley, and we take gate installation work throughout the area. Alongside Whitney, we install and repair gates in Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re just over the line from 89122, the same crew and the same upfront pricing apply. Our Gate Installation hub covers the full scope of what we build and service.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Whitney
They sag because the original builder-grade hinge post footing gives way after decades of Mojave sun and blowing dust, not because the gate panel itself is weak. Whitney’s 1990s tract homes are all hitting that age at once, so entire rows show the same sag. A technician typically performs sag correction by resetting the post footing and upgrading to a heavier hinge, then lubricates and aligns the latch. Call (888) 292-7536 for a free estimate.
Usually you can, but in Whitney it has to clear HOA architectural review first, and the approved styles and colors must match neighboring units. That detail varies even between adjacent HOAs in the Las Vegas Valley, so we check the rules for your specific tract before ordering. Send us the design you’re considering and we’ll tell you what the review is likely to require. Call (888) 292-7536 for a free second opinion on any written estimate.
It bakes the wiring and wears the rack and pinion on slide gates faster than a milder climate would. Intense UV and low humidity dry out seals and insulation, and blowing dust grinds grit into the moving parts. When we install an operator in Whitney, we check the loop detector and safety photocell and spec hardware that holds up to the heat. Call (888) 292-7536 and we’ll walk you through the right setup.
An automatic gate needs a functioning safety photocell and a loop detector so the gate reverses or holds when something is in its path, and we verify both on every install. This is the part we won’t cut corners on, because an operator that doesn’t sense an obstruction is a hazard. We test the safety devices before we call the job done. Call (888) 292-7536 to schedule a free measure.
A custom ornamental gate typically takes four to eight weeks from approved design to installed, because fabrication and HOA review both take time, and underground operators plus intercom and camera entry add coordination. We set the written price first, then give you a schedule we can hold. This is measured, ordered, and scheduled work, not a same-day job. Call (888) 292-7536 for a free estimate.
Get a Free Gate Installation Estimate in Whitney
If you’re in Whitney and your gate is sagging, seized, or ready for something new, the first step is a free on-site measure and a written price. We answer the phone with a live person around the clock at (888) 292-7536, so you’re never stuck leaving a voicemail. The price is agreed before any work starts, and every job carries the 90-Day Done Right Promise in writing. A gate that runs quiet for years starts with getting the measure, the post, and the hardware right. Call (888) 292-7536 today.
Written by the team at Gatewood Fence & Gate Paradise.