Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Whitney
If your driveway gate is dragging, sagging, or stuck half-open in Whitney, we can help. We repair and weld gates right where they sit, and our Gate Parts & Welding team handles hinge replacement, post replacement, rail repair, and custom welding on the spot. Most visit requests in Whitney get a callback the same day, with free estimates and pricing agreed before any work starts. Call (888) 292-7536 and a live person answers, day or night.

Why Gatewood Fence & Gate Paradise Is Whitney’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, and our technicians have up to 25 years of experience. That matters in a community like Whitney, where the same builder-grade gates have been baking in the desert sun since the 1990s. We know the failure patterns on these tract gates because we’ve seen them across the 89122 ZIP and the neighborhoods off the 89122 corridor again and again. When you call, a live person picks up around the clock – not a voicemail, not a call center three states away. And every job comes stamped in writing with our 90-Day Done Right Promise: if it’s not done right, we make it right, one call brings us back. We repair what other companies would rather replace, and we weld on site so your gate stays in your driveway instead of disappearing onto a truck. If a written estimate has you uneasy, we’ll give you a free second opinion on it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Whitney
We focus on the repairs that actually keep Whitney tract gates working: the hinge post, the footings, and the rails. Here’s what that looks like.
Hinge Replacement
A gate sags in the hinge post, not in the middle – and that’s where we start. On Whitney’s 1990s tube-steel gates, hinges seize from blowing dust and the weld at the hinge often rusts thin. We cut out the failing hinge set, reset it square, and weld a new set that matches the original profile so it passes HOA review.

Post Replacement
When a hinge post has loosened in saturated soil after a monsoon or flash flood, welding a new hinge onto a leaning post just means you’ll fix it twice. We reset the footing, plumb the post, and correct the sag before the gate goes back on. That’s the step that makes a Whitney repair last through the next wind event.

Rail Repair
A rusted bottom rail can be repaired without replacing the whole gate. We cut out the rusted section, weld in new tube steel, and treat the finish so it holds up against the Mojave sun. In the shoulder-to-shoulder tracts, matching the original rail profile and color keeps your unit consistent with the row.

Custom Welding
Sometimes a gate needs a bracket, a reinforcement, or a repair to the operator’s mounting arm – especially on older LiftMaster and FAAC operators that get racked by wind load on solid infill gates. We weld it on site, in your driveway, so the gate never leaves Whitney.
Trusted Brands We Service in Whitney
We’re certified to service nine major gate brands, and in Whitney you’ll most often see us working around LiftMaster and FAAC operators on these older tract gates, plus DoorKing and Elite on the access-control side. We don’t claim to stock parts on a truck. We diagnose the brand and model, order what’s needed, and turn the repair around fast. On a gate that’s 25 to 30 years old, getting the right part the first time matters more than speed alone.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Whitney Homes
- Wind load bending hinges. Solid infill gates catch the gust and the hinge takes the load. On older LiftMaster and FAAC units, the operator arm often racks right along with it.
- Saturated ground loosening footings. After a flash flood, the hinge post leans and the gate sags. The footing, not the panel, is the fix.
- Blowing dust grinding hardware. Grit works into hinges, rollers, and latches until they seize. Regular cleaning buys you years.
- Desert sun oxidizing finishes. Builder-grade paint oxidizes fast here, and that’s how bottom rails rust through and replacements start mismatching the row.
Pricing for Gate Parts & Welding in Whitney, NV
A typical hinge replacement in Whitney runs $150 – $350 per gate. Post replacement with a reset footing usually lands $300 – $650, and a rusted bottom rail repair runs $180 – $450 depending on how much tube steel has to be cut out. Custom welding and bracket work starts around $125. Prices depend on gate size, how far the footing has moved, and whether the finish needs matching for HOA. We quote and agree the price before any work begins – no surprises at the door. Standing offers: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Whitney
We also work in Whitney and the surrounding communities: Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re just outside the 89122 line, call and we’ll tell you whether we cover your street.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Whitney
Because Whitney’s gate stock is a single generation of 1990s builder-grade tube-steel gates all reaching failure at the same time, combined with desert wind and dust that grind the hardware. The fix isn’t just the panel – it’s the hinge post and footing. Call (888) 292-7536 for a free estimate.
Most operators have a manual release – usually a key, lever, or pull cord on the operator housing – that lets you disengage the drive and swing the gate by hand. Find yours before you need it, and never force a gate that’s still engaged. If you’re unsure how yours releases, call us at (888) 292-7536 and we’ll walk you through it.
Very often, yes. In the HOA-governed tracts, replacements usually have to match the neighbor units and approved colors and styles. That’s why exact-match welding and finish matter here. We can quote a repair that keeps you compliant – call (888) 292-7536 for a free estimate.
A gate that closes on its own, runs jerky, or reverses mid-travel is the usual first sign. That points to a racked arm or a safety device that took a hit. Call (888) 292-7536 and we’ll check the operator and the safety photocell and loop detector.
Yes, in most cases. We cut out the rusted section, weld in new tube steel, and treat the finish to match. It costs far less than a full replacement and keeps your gate consistent with the row. Call (888) 292-7536 for an exact quote – estimates are free.
Ready to get your Whitney gate working again? Call Gatewood Fence & Gate Paradise at (888) 292-7536 for a free estimate. A live person answers around the clock, we quote and agree the price before any work starts, and every job is backed in writing with our 90-Day Done Right Promise.
Written by the team at Gatewood Fence & Gate Paradise.