Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Paradise
If you live or run a business in Paradise, you already know the gates around here take a beating. Between the Strip traffic, the desert sun, and iron hung back in the 1970s, a gate that still opens is not the same as a gate that is safe. We install and replace driveway gates, pedestrian gates, sliding gates, swing gates and security gates throughout Paradise, and we come out to look at the job before anyone quotes you a number. Call (888) 292-7536 and a live person picks up, day or night. Our technicians have up to 25 years of experience, and the local pro who shows up is licensed and insured as their state requires. You’ll get a written price and you agree to it before any work starts.

Why Gatewood Fence & Gate Paradise Is Paradise’s Preferred Gate Installation Company
Paradise is not a master-planned suburb with matching stucco walls. It’s a built-up unincorporated urban strip, and the gate work here shows it. On the same block along Las Vegas Blvd or Flamingo you’ll find a casino service gate that needs a modern operator and a mid-century motel’s iron pedestrian gate that’s been baked and bent by twenty summers of desert sun. That mix is what makes Paradise gate installation different from a job in Henderson or North Las Vegas, and it’s why we start every visit by looking at the post, not just the panel.
We’re locally owned and owner-operated, with a published address and license number anyone can look up, and every job carries the 90-Day Done Right Promise in writing. Calls are answered by a live person around the clock, and the person who shows up is background-checked. We also know how to listen to what a Paradise homeowner has already been through: a national outfit quoting one price on the phone and charging another at the door. The estimate we give you is the estimate you pay.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Paradise
Driveway Gate Installation in Paradise
Most Paradise driveway gates we see are original wrought-iron or chain-link, many of them rusted at the welds or out of square from monsoon wind and grit packed in the hinges. A new driveway gate has to line up with the existing concrete, not fight it. We measure the opening, check the hinge post footing, and set the gate so it swings true instead of dragging a few months later.

Swing Gate Installation in Paradise
Swing gates are the most common thing we install on older Paradise residential blocks, and the panel is rarely the whole story. Because so many of these gates went up before modern safety requirements, the footing is often rotted or too shallow. We correct the post first, then hang the gate. Fix the panel without the post and you’ll fix it twice.

Pedestrian Gate Installation in Paradise
A pedestrian gate is a security gate for walk-through traffic, and in Paradise that means motels, apartment complexes and side entries along Tropicana. We install iron and metal walk gates sized for the opening and set on hardware that holds up to everyday use. Pool-side pedestrian gates get checked against Nevada’s self-closing and self-latching child-safety code before we call the job done.

Security Gate Installation in Paradise
Paradise runs on 24-hour traffic, and a lot of the security gates here need to keep working when nobody’s watching. That means sturdy posts, quality hinges, and hardware that tolerates dust and heat fatigue. Whether you’re securing a commercial service entrance or a residential back gate, we install it to close hard and latch every time.
Trusted Brands We Service in Paradise
We’re certified to service nine major gate brands, and on Paradise installations the names that come up most are LiftMaster, Elite and DoorKing. We don’t keep a warehouse of parts sitting around, so if your job needs a specific opener or control board, we tell you up front and order it rather than guessing. That keeps the turnaround honest. If your existing operator is one of the brands we service, we can usually get moving on the retrofit faster than a full swap would allow.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Paradise Homes
- Sun-baked iron welds that snap instead of bending. On original wrought-iron driveway and pedestrian gates around Paradise, the welds crack cleanly after years of heat and UV. Re-welding alone fails again unless the hinge post footing is corrected first, so we always check the post before touching the panel.
- Grit-packed hinges and slide tracks. Monsoon wind and dust storms pack grit into hinges and rack-and-pinion tracks on sliding gates, which makes operators bind and motors burn out early. Cleaning and re-setting the hardware during installation heads off that failure.
- Legacy operators with no entrapment protection. A lot of pre-safety-era automatic gates in Paradise still run fine but have control boards with no working photocells. They fail UL 325, and we won’t leave one running without a way to stop it on contact.
- Rusted chain-link and pool gates out of code. Motel-era and 1960s – 80s properties often have original chain-link and pool gates that no longer self-close or self-latch. Pool gates must satisfy Nevada’s child-safety code, so we re-set the safety hinges as part of the job.
Pricing for Gate Installation in Paradise, NV
We quote real numbers, not a range that magically grows at the door. A typical pedestrian or security gate installation in Paradise runs $650 – $1,800 depending on material and width. A standard driveway swing gate runs $1,600 – $3,800, and a sliding driveway gate with new hardware runs $2,400 – $6,500. Fitting a modern operator to an existing gate, including safety photocells, usually adds $900 – $2,500. Rotted hinge post footings, code upgrades on pool gates, and commercial roll-up replacement push the number up, and we tell you why before we start. The price is quoted and agreed before any work begins. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Paradise
Paradise sits close to a handful of other neighborhoods, and we take gate work in all of them: Winchester, Whitney, Spring Valley and Enterprise. If your gate is just outside the Paradise line, we’ll still come look at it. You can read more about our full Gate Installation services, or get the details on Gate Installation in Paradise right here.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Paradise
In most cases a sagging wrought-iron panel can be retrofitted, provided the hinge post footing is sound. The sag almost always traces back to the post footing, not the panel itself, and on older Paradise residential blocks the original welds often crack cleanly rather than bend after years of sun. The usual approach is to re-set the footing, re-weld the heat-fatigued iron, and rehang, which is far cheaper than a new gate. Replacement only wins when the post or frame is beyond saving. Call (888) 292-7536 for a free estimate and we’ll tell you straight which one it is.
Usually not. Most pool gates installed on mid-century Paradise properties no longer self-close and self-latch the way Nevada’s child-safety code requires, and the original hinges are the common failure point. We re-set the safety hinges and check the latch as part of the job so the gate meets code. Call (888) 292-7536 and estimates are free.
Yes. An automatic gate that runs without working photo-eyes or other entrapment protection fails UL 325, and it’s a real safety hazard if someone walks through while it closes. Plenty of pre-safety-era operators along the Paradise strip still run fine and pass the eye test, but they aren’t safe. We can add modern safety photocells to most existing operators. Call (888) 292-7536 for an exact quote.
Because the iron there bakes harder than anywhere else in the valley, and the dust packs in. The gates just east of the Strip are mostly original wrought-iron hung before modern safety requirements, and after years of heat the welds crack instead of bending. Push them again and again and the hinge goes with them. Re-welding on brittle iron without correcting the post just repeats the problem. Call (888) 292-7536 and we’ll figure out what’s actually failing.
Yes, in most cases a modern LiftMaster or FAAC operator can be fitted to an original 1970s wrought-iron swing gate, as long as the post and hinges are brought into sound condition first. The operator is only half the system; the gate has to swing free and be true before the operator goes on, and it needs working safety photocells. That retrofit is exactly the kind of split job Paradise produces. Call (888) 292-7536 for a free site look and a written price.
Whether you’re on the commercial side of Paradise with a roll-up gate that’s stopped working or a homeowner with iron that’s been sun-baked since the 1970s, we’ll come out, look it over, and give you a written number before anyone touches a tool. Call (888) 292-7536 for a free estimate. A live person answers, and the 90-Day Done Right Promise goes on every job in writing.
Written by the team at Gatewood Fence & Gate.