Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Paradise, NV
Paradise doesn’t look like other towns, and gate repair here doesn’t work like it does anywhere else. One block off Las Vegas Blvd you’ll find a casino service gate that has to open at 4 a.m. no matter what, and two doors down a 1970s iron pedestrian gate on a motel that’s been baked brittle by forty summers of desert sun. We fix both. Calls come in around the clock, and a live person picks up every time – no voicemail, no queue. When you call (888) 292-7536, you’ll get an honest read on what’s wrong and a price agreed before anyone touches the gate.
Why Paradise Homeowners Choose Gatewood Fence & Gate Paradise
Most of the calls we get in Paradise start the same way: somebody else already looked at the gate and said it needs replacing. Usually it doesn’t. A sagging gate sags in the hinge post, not in the middle, and that’s where we start. We weld on site, in your driveway, rather than hauling the gate off to a shop where it sits for a week.
The name is on the shop and the shop is down the road. Our technicians have up to 25 years of experience, they’re background-checked and uniformed on every job, and we’re certified to service nine major gate brands including LiftMaster, DoorKing, and Mighty Mule. Every job carries the 90-Day Done Right Promise in writing – if it’s not right, one call brings us back. No runaround, no fine print.
We work the older residential blocks around Paradise Park and the motel corridors off Tropicana regularly, and the mixed commercial frontage near the Convention Center stretch. Pricing is upfront and doesn’t change at the door. There’s no trip charge inside the county, $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans – none of it requires haggling.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Paradise
Paradise gates fail in different ways depending on what’s on the property. Here’s what we handle and how it usually plays out.
Gate Repair in Paradise
Sagging hinges, snapped welds, bent frames, gates that drag on the concrete or won’t latch. On Paradise’s older iron, sun-baked welds often snap rather than bend, so we re-weld on site and reset the hinge post while we’re there. Fix the panel without the post and you’ll fix it twice.
Learn more about our Gate Repair in Paradise.

Gate Installation in Paradise
New iron, aluminum, or chain-link gates for driveways, pool enclosures, and commercial entries. Pool gates get set to Nevada’s self-closing and self-latching child-safety code from the start, which saves a headache later. Installation is measured, ordered, and scheduled – we’ll give you a written price after a free measure, not a phone guess.
Learn more about our Gate Installation in Paradise.

Gate Motor & Opener in Paradise
Operators that stall in the heat, remotes that quit, arms that bind or reverse for no reason. Desert heat is hard on control boards and battery backups, and monsoon grit packs into tracks and hinges. We diagnose the actual failure before swapping parts – most operators don’t need replacing.
Learn more about our Gate Motor & Opener in Paradise.

Gate Access Control in Paradise
Keypads, card readers, call boxes, and entry systems for apartment complexes, motels, and gated residential drives. Paradise has a lot of small properties running commercial-grade access on a residential budget, and we make those systems work together without a full rip-out.
Learn more about our gate access control in Paradise.
Gate Parts & Welding in Paradise
Hinges, latches, rollers, posts, and on-site welding for iron and steel. We weld in the driveway so the gate stays put and you’re not waiting on a shop turnaround. Parts are matched to what’s actually on your gate, not whatever’s closest on the shelf.
Learn more about our gate parts and welding in Paradise.
Neighborhoods We Serve in Paradise
Paradise runs long and narrow along the Strip corridor, and we cover the residential pockets tucked inside it. Most calls in the core get a same-day visit.
- Paradise Park and the streets east of the Strip, where original wrought iron is common
- The Tropicana and Flamingo corridors, mixing motels, apartments, and single-family homes
- Winchester-adjacent blocks near the Convention Center
- Properties along Las Vegas Blvd with commercial and residential gates on the same lot
See the difference
Before
After
Before
After
Before
AfterWhy Paradise’s Climate & Housing Affect Gate Repair
Paradise is an unincorporated urban strip, not a master-planned suburb, and that shows up in the gates. The housing is a patchwork – 1960s through 1980s single-family homes, low-rise apartments, and motel-era properties – much of it still carrying original wrought-iron or chain-link driveway and pool gates. After decades of extreme heat and UV, those frames warp, wooden pickets dry out and split, and the iron gets heat-fatigued to the point where a weld snaps instead of bending. Monsoon winds and dust storms bend lightweight gates and pack grit into hinges until they seize.
There are no hard freezes here, so frost heave isn’t the problem – rust and heat fatigue are. On the older blocks just east of the Strip, we routinely find brittle welds that let go under a light push, and pool gates that no longer self-close or self-latch the way Nevada code requires. Re-welding heat-fatigued iron and re-setting safety hinges often happen on the same call. That mix of high-turnover commercial gates and aging residential iron on one block is what separates Paradise work from Henderson or North Las Vegas.
Pricing for Gate Repair in Paradise
What a gate repair costs in Paradise depends on the failure, but here’s the honest range. Every price is quoted and agreed before any work starts – you’ll never get an invoice bigger than the number you said yes to.
| Job | Typical Range |
|---|---|
| Hinge, latch, or roller replacement | $120 – $250 |
| On-site weld repair (iron or steel) | $150 – $350 |
| Hinge post reset / re-square | $200 – $450 |
| Operator diagnosis and repair | $150 – $400 |
| Pool gate safety hinge re-set (code compliance) | $150 – $300 |
Standing offers apply: $40 off any repair over $200, no trip charge inside the county, and 10% off for seniors and veterans. Call (888) 292-7536 for an exact quote – estimates are free.
Service Area – Cities Near Paradise
Paradise sits in the middle of the valley, so we also cover the towns around it. If you’re in Winchester, Whitney, Spring Valley, or Enterprise, we handle gate repair and installation there too – same upfront pricing, same 90-Day Done Right Promise. Call and tell us where you are, and we’ll get someone out. Start back at our home page for the full picture of what we do.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Paradise
Most repairs in Paradise run $120 to $450 depending on the failure – hinge and latch work at the low end, post resets and operator repairs higher. The price is quoted and agreed before any work starts. Call (888) 292-7536 for an exact quote – estimates are free.
Yes, in most cases. Paradise is a compact corridor and calls in the core often get a same-day visit, especially for gates that won’t close or won’t latch. A live person answers around the clock, so call whenever the problem shows up.
Yes. Nevada’s child-safety code requires pool gates to self-close and self-latch, and a gate that swings free is out of compliance. We re-set the safety hinges and confirm the latch catches every time. Call (888) 292-7536 and we’ll get it right.
We weld on site, in your driveway. That keeps your gate where it belongs and skips the shop turnaround – which matters on Paradise’s older iron, where sun-baked welds snap rather than bend and re-welding heat-fatigued metal is often the whole fix.
A free measure, a written price, and a scheduled install of the new gate – posts, hardware, and pool-code safety self-closing hinges where required. Installation is measured and ordered, so it’s planned, not rushed. Call for a free estimate and a written quote.
When a gate in Paradise quits on you – a motel entry that won’t latch, a driveway iron gate that’s been sagging since the last windstorm, or an operator that stalls in the July heat – pick up the phone. A live person answers any hour, the price is agreed before we start, and every job is backed by the 90-Day Done Right Promise in writing. Call (888) 292-7536 for a free estimate.
Written by the team at Gatewood Fence & Gate Paradise.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Paradise Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth