Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Enterprise
If you’re putting in a new gate on your Enterprise property, we can help. Gate installation in Enterprise runs $2,400 – $6,800 for a typical residential driveway gate with automation, and $900 – $2,200 for a pedestrian or side-yard gate. We know this part of the southwest valley well, and we answer the phone with a live person around the clock at (888) 292-7536. The right gate, hung right the first time, saves you a decade of callbacks. That is what we aim for.

Why Gatewood Fence & Gate Paradise Is Enterprise’s Preferred Gate Installation Company
Our team has been fixing and installing gates in the Las Vegas Valley since 2001, and Enterprise has become one of the busiest corners of our work because of all the newer construction. The name is on the shop, the shop is down the road, and the license number is on every invoice. That is the oldest accountability there is.
Our technicians bring up to 25 years of experience to every job, and we stand behind the work with the 90-Day Done Right Promise written plainly on the invoice. One call brings us back. No runaround, no arguing about whether it was our fault.
We answer the phone day or night with a real person, not a voicemail box or a bot. For a new gate install that usually means a free measure and a written price, and for emergency repair we can often get someone out to Enterprise the same day. Either way, you know what you’re paying before we pick up a wrench. We’re background-checked and insured, and we carry a strong local reputation built on showing up when we said we would.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Enterprise
Here’s the range of gate work we do on Enterprise homes, and what a fair price looks like on each.
Driveway Gate Installation in Enterprise
A driveway gate in an Enterprise subdivision has to do two jobs: swing or slide cleanly, and satisfy the HOA. Most of the homes here are stucco-and-frame single-family houses with wrought-iron or ornamental steel drive gates, and a lot of them are automated. A typical single driveway gate in Enterprise runs $2,800 – $6,800 installed, depending on width, material, and whether automation and a power run are added.

Pedestrian Gate Installation in Enterprise
Side-yard and backyard pedestrian gates are the quiet workhorses of Enterprise, and the ones most often hung in a hurry. We set footings properly and hang them so they close on their own for a real reason, not because they’re crooked. Pedestrian gate installs in Enterprise usually run $900 – $2,200.

Sliding Gate Installation in Enterprise
Where a driveway has the room, a sliding gate solves a lot of swing and sidewalk problems. Sliding gates on Enterprise lots typically run $3,500 – $7,500 installed with a basic operator. We check the ground prep and track before anything is welded, because a sliding gate on a bad footing will fail no matter what motor you bolt to it.

Swing Gate Installation in Enterprise
Most of the newer Enterprise driveways were built for a swing gate, but many were never reinforced for one that’s automated. Swing gate installs in Enterprise run $2,400 – $6,200. If automation is going on, the hinge post has to be right first, or the motor fights a gate it can never win against.
Trusted Brands We Service in Enterprise
We service nine major gate opener brands, including DoorKing, Elite, and Mighty Mule, and we’re certified on all of them. We don’t keep a parts warehouse, so we don’t promise overnight miracles on exotic parts. What we do is diagnose the operator, order exactly what’s needed, and get back to you fast with a straight answer. If your old LiftMaster or DoorKing unit can be repaired instead of replaced, we’ll tell you that first.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Enterprise Homes
Enterprise has its own set of gate troubles, and they don’t look like the ones in older parts of the valley.
- Builder-grade operators that fail early. A lot of these subdivision gates came with operators sized for moderate climates. On a west-facing Enterprise driveway that sees 105°F+ summers, the control board bakes and the motor strains.
- Manual gates retrofitted without reinforcement. Adding an opener to a gate that was never reinforced for one puts strain on a hinge post that isn’t ready for it, and you get sag plus a worn-out motor within a couple of summers.
- No pre-wired power at the gate. Many of these homes went up without conduit run to the gate location, so adding automation later means trenching and a proper electrical run.
- Sun and dust on the hardware. The intense desert sun and near-zero humidity wear hinges, powder coat, and photo-eyes faster than the gate frame itself, so service calls here skew toward small iron and steel parts, not the gate body.
Pricing for Gate Installation in Enterprise, NV
Here are honest ranges for Enterprise. A pedestrian or side-yard gate runs $900 – $2,200. A single swing driveway gate runs $2,400 – $6,200, and a sliding driveway gate $3,500 – $7,500. Add automation and you’re looking at $1,200 – $3,000 more for a proper operator, and a power and conduit run if there’s no pre-wired supply can add $800 – $2,500 depending on distance. What moves the number is material, gate width, footing conditions, and whether you need a fresh electrical run. We give a written price before any work starts, and we stand by $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Estimates are free.
We Also Serve Cities Near Enterprise
Enterprise sits in the fast-growing southwest valley, and we cover the neighborhoods around it too. If you’re in Spring Valley, Paradise, Winchester, or Henderson, we can help, and the same install, measure, and written-price process applies. See our full Gate Installation service for the whole range of what we do, or check our Gate Installation in Enterprise page for the local details.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Enterprise
Yes, and this is the single most important thing to know about gate work in Enterprise’s newer subdivisions. Many HOAs here require replacement gates to match the subdivision’s approved iron style and finish exactly, so a generic off-the-shelf gate can be rejected even if it fits perfectly. We work from your CC&Rs and subdivision design standards before we order anything. Call (888) 292-7536 for a free measure and we’ll sort out the design-review requirements up front.
Because in most cases the original operator was undersized for this climate. In Enterprise’s tract-home subdivisions, a builder-grade operator often starts failing after two or three summers of 105°F+ heat, especially on west-facing driveways where the control board bakes. The usual fix is a heavier-duty operator with a proper rack and pinion, hinge-post sag correction, and verified photocell alignment. Call (888) 292-7536 for an exact quote on the upgrade.
Yes, provided the hinge post is reinforced and the footings are sound first. Plenty of Enterprise homeowners have a manual gate that was never built for an opener, and bolting a motor to it just strains the hinges and wears the motor out early. We check the post and footing before quoting anything. Call (888) 292-7536 to schedule a free measure.
We trench and run proper conduit to the gate location and tie it in to your panel, so the operator has the supply it was designed for. A lot of Enterprise homes were built without pre-wired power at the gate, so this is common here, and it usually adds $800 – $2,500 depending on how far the run is. The number gets quoted and agreed before any digging starts. Call (888) 292-7536 for a free estimate.
Automatic gates need UL 325 entrapment protection: photocells, and typically safety edges, so the gate reverses or stops if something is in its path. We verify that alignment on every automated install. If you’re not sure what your current gate has, we’ll take a look. Call (888) 292-7536 and we’ll give you a straight answer.
Whether you’re replacing a failing builder-grade gate or adding automation for the first time, we’ll give you a free measure, a written price, and a gate hung right the first time. Call (888) 292-7536 for a free estimate in Enterprise.
Written by the team at Gatewood Fence & Gate.