Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Access Control Across Enterprise
If you live in Enterprise and your driveway keypad has started ignoring you, or your remote works from ten feet but not from the street, you need someone who knows why that happens on this side of the Valley. We do. Enterprise sits in the fast-growing southwest Las Vegas Valley, where a decade of master-planned tract-home construction means most gate access control work here happens inside an existing ornamental steel or wrought-iron gate, not around a brand-new one. We know the HOA subdivisions off Silverado Ranch and Bermuda, and we know what a 89139 summer does to a west-facing opener. Call (888) 292-7536 and a live person picks up, day or night.

Why Gatewood Fence & Gate Paradise Is Enterprise’s Preferred Gate Access Control Company
Enterprise homeowners tend to find us the same way: a neighbor points down the street and says call the gate guy. That word-of-mouth matters more here than any ad, because in a subdivision where every gate has to match the CC&R design, a referral is proof the last job passed review. We repair what other outfits want to replace. On-site welding keeps the gate in your driveway, and every job carries the 90-Day Done Right Promise in writing, not buried in fine print.
Our technicians have up to 25 years of experience, and they’ve spent plenty of it on the builder-grade operators installed across Enterprise during tract construction. When a west-facing swing gate stalls every July, we usually know the operator board and the photocell are the suspects before the truck pulls up. Calls in Enterprise get answered by a live person around the clock, not a voicemail or a queue three states away.
The name is on the shop, and the shop is down the road. That’s the oldest accountability there is, and it’s why Enterprise homeowners call back.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Access Control Services in Enterprise
Most of what we do in Enterprise is bringing an existing gate up to modern access control rather than building from scratch. Here’s where the calls come from.
Keypad Entry in Enterprise
A keypad on a tract-home side-yard gate usually fails because the sun cooked the membrane and the dust got into the seams, not because the wiring went bad. We swap the unit, re-seat the connection, and reprogram codes for the whole household. If your HOA wants the keypad to match the subdivision’s finish, we work with that instead of bolting on whatever’s on the shelf. Whether it’s a DoorKing pedestal unit or a smaller LiftMaster keypad, we service both.

Remote Control in Enterprise
Remotes that work from the driveway but not the street usually point to a tired receiver or a photo-eye that’s fogged with blowing desert dust. We pair new remotes, replace receivers, and test range from where you actually sit in the car. Many of these tract homes also have a second gate out back, and we can get one remote running both if the operator supports it.

Phone Entry in Enterprise
Phone entry means you buzz someone in from your cell, or a visitor calls a number and you release the gate from wherever you are. That’s the practical answer for Enterprise households where someone works late or the front door isn’t staffed. We connect the unit to your operator, test the call path, and walk you through it before we leave.

Card Reader Access in Enterprise
Card readers make sense on shared driveways and small private lanes in the newer Enterprise subdivisions where more than one household needs in. We install, wire, and program them, and we test each card before we hand over. If your HOA requires design approval on the reader housing, we’ll flag that early.
Trusted Brands We Service in Enterprise
We service and program the access hardware on nine major gate brands, including LiftMaster, DoorKing, Elite, and Mighty Mule. We don’t stock parts on a truck, so we don’t pretend to. What we do is diagnose the actual failure, order what’s needed, and turn it around fast. In Enterprise, that usually means a keypad, a receiver, or a control board that arrives within a couple of days, not a week. If the failure is inside the operator itself, we service the brand you already have rather than pushing a whole new system.

Common Gate Access Control Problems We See in Enterprise Homes
These are the calls that come in again and again from Enterprise, and they’re specific to how the Valley’s southwest side was built and how it wears.
- Builder-grade operators overheating in July and August. Tract construction in Enterprise put many of these operators in during the mid-2000s to 2010s, and they were specified to subdivision budget, not to the heat. On west-facing drive gates, the control board cooks and the gate starts stalling mid-travel or reversing on its own.
- Photocells fogged by blowing dust and stressed by UV. A photo-eye clouded with desert dust tells the operator something’s in the path, so the gate reverses and the keypad appears to stop working. The access control isn’t rejecting your code; the safety eye is.
- Hinge posts that walk out of their footings. Shrink-swell soils and the rare monsoon flash flood move the post, and once the panel sags, the operator drags and strains. Fix the panel without the post and you’ll fix it twice.
- Gates automated after the fact without a conduit run. Many Enterprise tract homes came with a manual gate and no power planned at build, so a later automation job means surface-mounted wiring. That can fail HOA design review or inspection, and it’s ugly on a gate that’s supposed to match the street.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Access Control in Enterprise, NV
Here’s what gate access control actually runs in Enterprise. A keypad replacement with reprogramming typically lands between $180 and $350 installed. A remote receiver replacement or a new set of paired remotes usually runs $120 to $280. Photo-eye replacement, which is the culprit more often than people expect, is $140 to $260. A full phone-entry or video-intercom addition runs $450 to $1,200, depending on whether the manufacturer specified a powered conduit run at build. If the operator itself has failed, an operator replacement on a builder-grade unit typically runs $800 to $1,800 installed, brand depending. Every price is quoted and agreed before any work starts, and we don’t change it at the door. Free second opinion on any written estimate. Call (888) 292-7536 for an exact quote.
We Also Serve Cities Near Enterprise
Enterprise is our main focus here, but we also work in the surrounding southwest and south Valley. If you’re in Spring Valley, Paradise, Winchester, or Henderson, the same access control work applies, and the same live person answers when you call.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Access Control in Enterprise
Yes, and that’s the standard answer in Enterprise. Access control upgrades go on the gate you already have, so the ornamental steel or wrought-iron panel stays put and keeps matching the subdivision’s design standard. We replace the operator, keypad, receiver, or photo-eyes, verify entrapment protection, and leave the gate itself alone. If HOA architectural review is required for the operator housing or any visible change, we flag it before work starts. Call (888) 292-7536 for a free estimate.
Yes. It’s one of the most common jobs we do in Enterprise’s newer subdivisions. The main question is power: if no conduit was run at build, we discuss the surface-run option and how it affects design review before quoting. Then we install the operator, the keypad, and the paired remotes, and test everything before we leave. Call (888) 292-7536 and we’ll walk through what your specific gate setup needs.
In most Enterprise cases, that’s a fogged and UV-stressed safety photocell, not the keypad. The photo-eye sees a phantom obstruction, tells the operator to reverse, and the keypad command never gets through. A heat-stressed control board in a west-facing operator can cause the same symptom. We test the eye, the board, and the alignment in one visit. Call (888) 292-7536 for an exact quote.
In Enterprise, it’s usually the gate, specifically the hinge post. Shrink-swell soils and monsoon saturation shift the post in its footing, the panel sags, and the operator takes the strain trying to push through it. A gate sags in the hinge post, not in the middle, and that’s where we start. Replacing the operator without fixing the post is a waste of money. Call (888) 292-7536 for a second opinion.
Yes. Any automatic gate needs UL 325 entrapment protection, and HOA design review in Enterprise’s master-planned subdivisions is where this gets checked. That means functioning photo-eyes and any required edge sensors, tested and verified, not just installed. We verify protection before we hand over new credentials, and we’ll note it on the invoice. Call (888) 292-7536 for a free estimate.
Get a Free Gate Access Control Estimate in Enterprise
Whether your builder-grade operator is on its last July or you’re finally adding keypad entry to that manual gate out back, pick up the phone. A live person answers around the clock at (888) 292-7536. You’ll get a free estimate, a written price, and the 90-Day Done Right Promise on every job. The local pro we send is licensed and insured as the state requires, and if anything isn’t right, one call brings us back.
Written by the team at Gatewood Fence & Gate Paradise.