A Gatewood company - serving Paradise, NV

Electric Gate Repair in Paradise, NV

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Electric Gate Repair in Paradise, NV

Electric gate repair in Paradise usually means one of three things: the opener stopped responding, the gate moves but won’t latch, or it started reversing on its own. Most of those visits are a single trip if the right person shows up – and that’s the whole idea here. We repair automatic driveway and entry gates across Paradise, from the older swing gates off the residential streets to the heavier slide gates on the commercial lots near the Strip corridor. Call (888) 292-7536 and a live person picks up, day or night.

We’re Gatewood Fence & Gate Paradise, locally owned and owner-operated since 2001. Our technicians have up to 25 years of experience, and we service nine major gate brands including DoorKing, LiftMaster, Elite, and Mighty Mule. That matters more than it sounds – a LiftMaster board and a DoorKing control box fail in different ways, and guessing wastes your money. If you want the bigger picture on what we handle across the valley, our Gate Repair in Paradise page covers the full scope.

Key Takeaways

  • Most electric gate failures in Paradise trace back to the operator, the safety sensors, or the hinge post – not the whole gate.
  • We repair on site, including welding, rather than hauling your gate away.
  • Every job carries the 90-Day Done Right Promise in writing.
  • Standing offers: $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.

When You Need Electric Gate Repair

Automatic gates tend to fail in patterns. If any of these sound familiar, it’s worth a look before something small becomes a replacement quote:

  • The gate opens halfway and stops. On slide gates this is often a limit switch that drifted or a track that collected grit and gravel. On swing gates it’s frequently a failing actuator arm. Either way, the gate isn’t the problem – the operator is telling it to stop.
  • It reverses before it closes all the way. Safety sensors or photo-eyes are seeing something that isn’t there. In Paradise, sun glare off a low-mounted photo-eye is a real culprit on west-facing driveways, and so is dust kicked up from the desert wind settling on the lens.
  • The remote works sometimes, not others. Intermittent remote control usually comes down to a weak receiver board, a dying battery, or a frequency conflict with a neighbor’s opener. We can tell the difference in a few minutes.
  • The gate sags and drags on the ground. A gate sags at the hinge post, not in the middle – and that is where we start. If the post has loosened in the soil, the gate can bind against the operator and burn out a motor over time.
  • You hear the motor running but the gate doesn’t move. That’s a mechanical disconnect – a sheared gear, a stripped chain, or a broken arm. Stop using it while it’s in that state; running a motor against a stalled gate shortens its life fast.
  • The keypad, intercom, or entry code stops working. Access control failures on DoorKing and similar systems are usually wiring, board, or power – rarely the keypad itself.

One safety note, and we mean it: automatic gates carry real force, and the springs, arms, and counterbalance hardware under tension can injure someone badly if they let go unexpectedly. Don’t try to hold a moving gate, disable a safety sensor to “make it work,” or take a wrench to a spring assembly. That’s a job for someone trained on it. We’ll get it right the first time.

Our Electric Gate Repair Process

  1. We answer the phone live and ask what it’s doing. Not what brand you think it is – what it’s doing. Does it reverse? Stall? Click and do nothing? Those answers tell us what to bring on the first trip so you’re not waiting on a second visit.
  2. We show up in the window we promised. We give you a real arrival window and keep it. Our technicians are background-checked, and you’ll know who’s coming.
  3. We diagnose on site, then tell you what it costs before we start. Upfront pricing, no haggling, no “it’s more than we thought” at the door. You get a written estimate, and you can get a free second opinion on it from us if you want one.
  4. We repair in your driveway, including welding. If a hinge has torn loose or a mounting bracket has cracked, we weld it on site. Fix the panel without the post and you’ll fix it twice – so we address the cause, not just the symptom.
  5. We test everything: travel limits, safety sensors, reversing, and remotes. Show me the gate closing on its own and I’ll show you where it’s failing. We make sure it doesn’t do anything unexpected when we leave.
  6. We stamp the 90-Day Done Right Promise on the job. If something we touched acts up in that window, one call brings us back. No runaround, no voicemail tag.

If the repair is a component-level job – a board, a motor, a control arm – we stock and source across the major brands, so most of the time we’re not waiting on a part for a week. That’s one reason we’re capable of serving LiftMaster and Mighty Mule gates alongside commercial DoorKing systems. When the underlying damage goes beyond the operator, we’ll walk you through the options on our Gate Repair page so you know what a full repair looks like.

Electric Gate Repair Pricing in Paradise

Here’s what electric gate repair runs in the Paradise area. These are real ranges, not the lowest number we can say on the phone to get in the door:

Repair Typical Cost Range
Diagnostic visit + adjustment (limit switches, sensors, remotes) $95 – $175
Safety sensor / photo-eye replacement $150 – $300
Opener motor or actuator replacement (residential) $400 – $850
Control board or receiver replacement $250 – $550
On-site hinge, bracket, or post welding repair $200 – $500
Access control / keypad / intercom service $175 – $450

What moves the number: gate weight and type (a heavy slide gate is a different job than a light swing gate), brand and part availability, whether the hinge post needs welding, and how long the problem has been ignored. A gate that’s been dragging for months usually costs more than one that stopped last Tuesday. We give you a written estimate before any work starts, so the price you hear is the price you pay.

Current offers, no gimmicks: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate (including one you got from someone else), and a permanent 10% discount for seniors and veterans. We don’t invent specials to get you on the phone.

FAQs – Electric Gate Repair

Can you fix my electric gate the same day?

Very often, yes. Most common failures – sensors, limit switches, remotes, wiring – we can diagnose and repair on the first visit. Call (888) 292-7536, and because a live person answers 24/7, you’ll get a real arrival window, not a callback that never comes. If a part has to be ordered, we’ll tell you exactly how long it takes.

Is it cheaper to repair my gate operator or replace it?

Repair is usually the right call when the operator itself is sound and a component failed – a board, a sensor, a gear. Replacement makes more sense on an older unit where the motor, board, and housing are all near the end of their life, or where parts are no longer made. We’ll tell you straight which one you’re looking at; we’re a repair-first shop, so we’re not going to sell you a whole new operator because a photo-eye went bad. Call for a free estimate and a straight answer.

How much does electric gate repair cost in Paradise, NV?

Most repairs fall between $150 and $550, with diagnostic visits starting around $95 and full operator replacement running $400 to $850 depending on the gate. Heavy slide gates and commercial access control sit at the higher end. Call (888) 292-7536 for an exact quote – estimates are free, and there’s no trip charge inside the county.

Do you repair all automatic gate brands?

We’re certified on nine major brands, including LiftMaster, DoorKing, Elite, and Mighty Mule, and we handle the most common residential operators you’ll find across Paradise. If your brand isn’t one of those, still call – the odds are good we can source parts or advise you on the spot.

What is the 90-Day Done Right Promise?

It’s exactly what it sounds like: if the work we did isn’t done right within 90 days, one call brings us back to make it right, and it’s stamped in writing on every job. No fine print, no “in most cases.” The name is on the shop, and the shop is down the road – that’s the oldest accountability there is.

Ready to Get Your Gate Working Again?

A gate that won’t close is more than a hassle – it’s a hole in your security and a reason to worry every time you pull out of the driveway. Don’t let it sit. Whether it’s a LiftMaster arm that keeps reversing, a DoorKing entry system that won’t accept codes, or a hinge that needs welding before the post gives out, we’ll get out there and fix it right the first time. We’re local, we’re owner-operated, and the person who answers the phone is the person who’ll show up. Call (888) 292-7536 today for a free estimate – a live person is on the line 24 hours a day. You can also start with our home page to see everything we do across the valley.

Written by the team at Gatewood Fence & Gate Paradise, serving Paradise.

Need Gate Repair help in Paradise? Licensed & insured · 30-60 min response · free estimates
Call (888) 292-7536
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Gatewood Fence & Gate Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch