A Gatewood company - serving Paradise, NV

Gate Realignment in Paradise, NV

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gate Realignment in Paradise, NV

Gate realignment gets a gate that has dropped, dragged, or stopped latching back to square. In Paradise, most steel and ornamental gates start to shift after two or three summers of baking afternoon heat followed by monsoon downpours, and the first sign is usually a gate that scrapes the ground or won’t line up with the latch post anymore. We handle realignment as its own repair because it solves a distinct problem: the gate is fine, it’s just sitting wrong. When a sag or drag is part of a bigger failure, the place to start is Gate Repair in Paradise, and when a hinge or hinge post has actually given out, that falls under Gate Repair proper. For a straight realignment, call (888) 292-7536. We’ll tell you on the phone whether you’re looking at a realignment or something more.

We’re local and owner-operated, which for this work matters more than it sounds. Realignment is a judgment call made on site. Somebody who knows the property, the post, and how the gate tends to move through the seasons will set it right the first time instead of coming back to the same call in six months.

Key Takeaways

  • Realignment fixes a gate that has dropped, dragged, or lost its latch alignment. It’s not the same as a hinge or post replacement.
  • Most realignments in Paradise come after summer heat expansion and monsoon moisture work on the posts and hinges.
  • We weld and adjust on site so the gate stays in your driveway, not hauled to a shop.
  • Every realignment carries the 90-Day Done Right Promise in writing.
  • Upfront pricing on the estimate. The number you hear is the number you pay.

When You Need Gate Realignment

Here’s what we hear on the phone, and what it usually means once we look at the gate. If two or more of these sound like your gate, a realignment is probably the fix. If not, we’ll say so.

  • The gate scrapes the ground or the driveway. When the leaf sags, the bottom edge drops and drags where it never used to. In a Paradise summer, a gate that sat perfectly in March can be catching the pavement by July because the steel and the post expand at different rates under the same sun.
  • The gate won’t latch or catch the striker. A gate that closes but never quite locks means the leaf and the post have drifted out of alignment. This is common after monsoon season, when wet soil shifts the base of a post slightly. A few millimetres is enough to miss the latch.
  • You can see daylight between the gate and the latch post. The gate has moved off-square. It might still open and close, but the gap means the striker is no longer lining up and the gate is starting to bind.
  • One hinge is holding while the other is loose. A gate hangs on its hinges and the post, not on the middle of the panel. If one hinge has loosened and the gate is twisting, realigning the hinges and checking the post brings it back. Fix the hinges without checking the post and you’ll fix it twice.
  • A gate from DoorKing, Elite, or LiftMaster won’t run smoothly on its track or arm. Automated gates make misalignment obvious, because the opener fights a leaf that’s dragging. The motor isn’t usually the problem. Alignment is. We see this slot in a lot of the older Paradise properties where the operator has been doing the work of a dragging gate for years.
  • The gate swings open or won’t stay closed on its own. That’s gravity telling you the hinges have moved off their plumb line. Show us the gate swinging shut by itself and we’ll show you which hinge to look at first.

Our Gate Realignment Process

No two gates need the same realignment, but the path is consistent. Here’s what happens when we get to your property.

  1. We check the hinge post first. The post is the foundation. A gate sags in the hinge post, not in the middle of the panel, and that’s where the diagnosis starts. If the post is loose or leaning, a realignment of the gate won’t hold up, and we tell you that before we do any work. The reason matters: adjust the gate without addressing a soft post and you’ll be back to square one within a season.
  2. We check hinge plumb, clearance, and latch alignment. We verify the gate is hanging plumb, measure the gap at the latch side, and check the ground clearance. That tells us whether the fix is a hinge adjustment, a small weld to a hinge strap, or a reposition of the striker.
  3. We weld on site if a bracket or hinge has shifted. Many Paradise realignments come down to re-welding a hinge bracket that has slowly worked loose from the frame. We weld it right there in your driveway with the gate attached. Your gate doesn’t leave your property.
  4. We reset the clearance and latch, then test it. We bring the leaf back to true, set the ground clearance, and adjust the latch so it catches clean. If you’ve got an operator from Mighty Mule or another brand we service, we test it under power, not just by hand, because an automated gate can look fine on a manual swing and fail the moment the motor engages.
  5. We walk you through what we found and what we set. You see the gate working before we leave. If we think the alignment will drift again because the post is soft or the ground has shifted, you’ll hear it from us plainly.

We service nine major gate brands, so the odds are good we’ve seen your operator before. The name is on the shop and the shop is down the road. That’s the simplest accountability there is: the person who realigned your gate is the person who comes back if it doesn’t hold.

Gate Realignment Pricing in Paradise

Realignment pricing depends mostly on what we find when we look. A simple hinge and latch adjustment on an ornamental gate runs less than a job that involves re-welding a hinge bracket and resetting a post. Here’s what to expect.

  • Simple hinge and latch realignment: Usually the lower end, a straightforward adjust-and-test visit with minimal welding.
  • Realignment with on-site welding: Mid-range. Re-welding a hinge bracket, strap, or striker takes more time and shop setup in your driveway.
  • Realignment plus post stabilization or replacement: The higher end, because a post that has gone soft or shifted is the root of the sag and has to be dealt with. Related to the cases covered under Gate Repair.
  • Automated gate realignment and test: Adjusting the leaf and then verifying the operator still runs clean. Brand-specific, whether it’s LiftMaster or a DoorKing operator, because they set up differently.

The honest answer to “what will it cost” is: it depends on the gate and the post. We give you an upfront number based on what we see, and it doesn’t change at the door. There’s no trip charge inside the county, and we’ll take $40 off any repair over $200. If you’ve got a written estimate from someone else, we’ll give you a free second opinion on it. If you’re a senior or a veteran, that 10% discount is permanent, not a promotion. Every realignment carries the 90-Day Done Right Promise in writing. Call (888) 292-7536 for a free estimate – it’s the fastest way to find out whether you’re looking at a small adjustment or something bigger.

What affects realignment cost

  • Whether the hinge post is solid or has shifted.
  • Whether welding is needed and how much.
  • Gate material: ornamental steel, aluminum, and chain link realign differently.
  • Whether an automated operator is involved and needs re-testing.
  • Gate size and weight, which affect how much hinge adjustment it takes to bring it true.

If the gate needs more than realignment, we say so and quote that separately. We repair first. We don’t swap parts that don’t need swapping.

FAQs – Gate Realignment

How much does gate realignment cost in Paradise?

Most gate realignments in Paradise fall in the low-to-mid range of our repair pricing, and the exact number depends on whether the hinge post is solid and how much welding is involved. A simple hinge and latch adjustment costs less than a job that includes re-welding a bracket or addressing a shifted post. We give you an upfront number from what we see on site, and there’s no trip charge inside the county plus $40 off any repair over $200. Call (888) 292-7536 for an exact quote – the estimate is free.

Can gate realignment fix a gate that drags on the ground?

Yes, usually. A gate that drags on the ground is almost always sagging because of hinge or post movement, and realigning the leaf and setting the ground clearance brings it back up. The one case where it won’t hold is a hinge post that has gone soft or shifted in the ground, because the gate will drift back. We check the post first for exactly that reason and tell you plainly if it’s the real problem. Call (888) 292-7536 and we can usually tell you over the phone what’s likely going on.

Does realignment work on automated gates from DoorKing or LiftMaster?

Yes. Automated gates from brands like DoorKing, LiftMaster, and Mighty Mule benefit the most from realignment, because a dragging leaf forces the operator to fight the gate, which wears the motor and the arm over time. We realign the leaf and then test the operator under power so we know the gate runs clean. We service nine major brands, so there’s a good chance we’ve worked on your make before. Call (888) 292-7536 to book a realignment.

How long does a gate realignment take, and does the gate leave my property?

A straightforward realignment usually takes a single visit, and the gate stays in your driveway the whole time because we weld and adjust on site. We don’t haul the gate off and we don’t pull parts that don’t need swapping. If the job needs a post stabilized or replaced, that add-on time is quoted before we start. Call (888) 292-7536 for a same-day or next-day window when we can.

Realignment Now Keeps You Out of the Repair Queue Later

A gate that’s out of alignment doesn’t stay put. A dragging leaf wears the hinges faster, an automated operator fighting a sagging gate burns through its motor, and a gate that won’t latch is a gate that isn’t securing your property. For people in Paradise who rely on their gate every day, the practical move is to fix alignment now, while it’s still a realignment job and not a full repair. –

We’re a locally owned, owner-operated gate shop. The person who answers the phone is the person who’ll talk through what’s going on, and the person who shows up is the one who does the work and stands behind it. Show us the gate closing on its own and we’ll show you where it’s failing. If we can realign it, we will. If it needs more, we’ll tell you straight. Call (888) 292-7536 for a free estimate on gate realignment in Paradise and we’ll get you scheduled.

Written by the team at Gatewood Fence & Gate Paradise, serving Paradise.

Need Gate Repair help in Paradise? Licensed & insured · 30-60 min response · free estimates
Call (888) 292-7536
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Gatewood Fence & Gate Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch