Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Paradise
Paradise isn’t a quiet suburb with tidy cul-de-sacs. It’s the unincorporated strip that runs along Las Vegas Blvd, Flamingo, and Tropicana, where casino service gates sit a block from mid-century motels and 1960s ranch homes with iron gates that have been baking in the sun for decades. We know that mix, and we know what it does to hinges, welds, and latch hardware. When a gate quits on you in Paradise, call (888) 292-7536 and a live person answers, day or night. If you want the broader picture of what we do, our Gate Parts & Welding team handles repairs and on-site welding so the gate stays in your driveway.

Our technicians have up to 25 years of experience, and every job is welded and adjusted right where the gate hangs. No hauling it off. No swapping parts that don’t need swapping. We quote the price and you agree to it before any work starts.
Why Gatewood Fence & Gate Paradise Is Paradise’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, and the name is on the shop. That matters in a place like Paradise, where the same block can hold a 24-hour commercial gate and an aging iron pedestrian gate on a motel that’s been there since the 1970s. We fix what other outfits want to replace, and we weld on site so you’re not waiting two weeks for a shop drop-off.
The 90-Day Done Right Promise is stamped in writing on every job. If it’s not right, one call brings us back, no runaround. A live person answers the phone around the clock, not a voicemail or a call center three states away. Standing offers we don’t make you haggle for: $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Response time to Paradise is straightforward because we work the strip and the residential blocks around it. When we say a window, we show up in it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Paradise
Hinge Replacement in Paradise
On the older residential blocks just east of the Strip, a sagging gate usually traces back to one thing: the hinge post has rusted through at the footing. Monsoon grit and seasonal dust pack into the hinge points over the years, hold moisture, and eat the steel from the inside. We inspect the post and footing first, then replace or re-set the hinges so the gate swings free and latches clean. Gate Parts & Welding in Paradise starts with finding the real failure point, not guessing at it.

Custom Welding in Paradise
Original wrought iron in Paradise doesn’t bend when it fails. It snaps. Years of UV and extreme desert heat make the welds brittle, and a gate that took a hit from a monsoon wind gust will shear at the joint. We re-weld heat-fatigued iron on site, rebuild broken joints, and match the finish so the repair doesn’t look patched on.

Post Replacement in Paradise
Fix the panel without the post and you’ll fix it twice. On Paradise’s mid-century homes and low-rise apartment complexes, the original posts are often rusted at grade where the footing meets dirt. We pull and replace the post, pour a solid new footing, and re-hang the gate square so it doesn’t bind six months later.

Rail Repair in Paradise
Wide driveway and pool-area rails on Paradise properties take a beating from sun and dust. Warped frames and cracked pickets on these gates are common, especially on chain-link and lightweight iron where the metal has dried out and lost tension. We straighten, re-weld, and reinforce the rail so the gate holds its shape through the next summer.
Trusted Brands We Service in Paradise
We’re certified to service nine major gate brands, and on Paradise jobs we regularly work on DoorKing, Elite, Mighty Mule, and LiftMaster operators and their accessories. We don’t stock parts on a truck, and we won’t pretend otherwise. What we do is diagnose what’s actually failed, source the right part for the make and model, and get it installed without a long turnaround. If your solar Mighty Mule opener on a long driveway quit after a dust storm or a run of 110-degree days, bring us the symptoms and we’ll run it down.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Paradise Homes
- Brittle, sun-baked welds that snap instead of bending. On older residential blocks east of the Strip, original wrought-iron gates develop welds so heat-fatigued they shear outright when the gate takes a hit. It’s a heat and UV problem, not a heavy-use problem.
- Hinge posts rusted through at the footing. Dust and seasonal grit pack into hinges, trap moisture, and rot the steel where the post meets ground. The gate sags and starts catching on the latch.
- Solar openers failing on shaded panels or hot batteries. Wide driveway gates powered by solar panels often quit when the panel gets shaded or the battery cooks in extreme heat. The gate isn’t broken; the power source is.
- Pool gates that no longer self-close and self-latch. Nevada’s child-safety code requires pool gates to self-close and self-latch, and aging hinges and warped frames throw that off. We re-set the hinge hardware so the gate complies.
Pricing for Gate Parts & Welding in Paradise, NV
Honest ranges for the Paradise market. A typical hinge replacement in Paradise runs $150 – $320 depending on whether the post needs re-setting. Custom welding repairs on wrought iron usually run $120 – $280 per joint or section. Post replacement, including the new footing, typically runs $350 – $750. Rail repair and straightening lands around $130 – $300. Solar or electric opener diagnostics run $95 – $175, and parts are extra based on the make and model.
What pushes a job toward the top of the range: rusted-through footings, hidden failures under the paint, and code work like re-setting pool gate safety hinges. What doesn’t change is the rule. We quote it, you agree to it, and that’s the number. Estimates are free, and a second opinion on any written estimate is free too. Call (888) 292-7536 for an exact quote.
We Also Serve Cities Near Paradise
We handle gate repair and welding across the neighboring communities too, including Winchester, Whitney, Spring Valley, and Enterprise. The same mix of mid-century iron and commercial gates turns up across those areas, and the same approach applies: find the real failure, weld it right, back it with the 90-Day Done Right Promise. If you’re just outside Paradise, call and we’ll tell you straight whether we cover your block.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Paradise
Years of intense UV and desert heat make the welds brittle, so they shear instead of flexing. On Paradise’s older residential blocks east of the Strip, the original wrought iron has been baking since the 1960s and 70s, and a monsoon gust or a hard bump will snap a fatigued weld clean. That’s why we re-weld on site with fresh material rather than patching over the old joint. Call (888) 292-7536 for a free estimate.
Check the solar panel first, then the battery. Dust storms coat the panel and cut its output, and extreme heat degrades the battery faster than most people expect, so the opener quits even though nothing mechanical is broken. Clean the panel, then have us test the battery and controller load. Call (888) 292-7536 and we’ll run diagnostics before you replace anything.
The gate has to self-close and self-latch on its own every time, and many aging Paradise pool gates fail that test as hinges wear and frames warp in the heat. Open the gate partway, let go, and see if it closes and latches without help. If it doesn’t, we re-set the hinge hardware so it complies. Call (888) 292-7536 for an inspection and a free estimate.
A sagging gate is the symptom; the hinge post or footing is usually the cause. On Paradise properties, the post often rusts through at grade where grit and monsoon dust trap moisture, so adjusting the panel alone just puts off the same failure. We inspect the post and footing first, then re-set or replace the post and re-hang the gate square. Call (888) 292-7536 for a free estimate.
Yes, rack and pinion replacement is a regular slide gate repair, and the parts are matched to the operator’s make and model. On Paradise commercial and residential slide gates we work on DoorKing and Elite operators and their drive hardware, and we source the correct rack for the gate weight and length. Call (888) 292-7536 and we’ll quote it before any work starts.
When a gate in Paradise quits, the fix shouldn’t be a mystery and the bill shouldn’t be a surprise. We weld on site, quote upfront, and back every job with the 90-Day Done Right Promise in writing. Call (888) 292-7536 for a free estimate. A live person answers, day or night.
Written by the team at Gatewood Fence & Gate.