Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Enterprise
If your driveway gate is dragging, sagging at the latch, or your keypad entry quit letting residents in, we can help. We’re Gatewood Fence & Gate, and we handle gate parts and on-site welding for homeowners and HOA communities across Enterprise, including the 89139 side of the southwest Valley. Hal and the crew know these subdivisions well, and because the work happens in your driveway, you won’t lose the gate for a week. Call (888) 292-7536 and a live person picks up, day or night, to get you on the schedule.

Why Gatewood Fence & Gate Paradise Is Enterprise’s Preferred Gate Parts & Welding Company
In Enterprise, gate work usually starts with a piece of paper, not a wrench. These master-planned communities are HOA-governed, so the exact iron style, height, and finish of your drive gate or side-yard gate has already been set by the subdivision’s CC&Rs. We read those design standards before we price a hinge, a post, or a weld. That one step saves Enterprise homeowners a rejected repair and a second visit.
We’re locally owned and owner-operated, registered in Clark County, and the name is on the shop and on every invoice. That’s the oldest kind of accountability there is. We’re certified to service nine major gate brands, from DoorKing entry systems to Mighty Mule and Elite residential operators, and our technicians have up to 25 years of experience. Every job carries the 90-Day Done Right Promise in writing: if it isn’t done right, we make it right, one call, no runaround.
We answer the phone with a live person 24/7, not voicemail and not a call center three states away. For gate parts and welding in Enterprise, that means you get a straight answer about whether it’s a hinge, a post, an operator, or a photocell before anyone touches the gate. And the pricing is upfront: you agree to the number before work starts, and our standing offers hold without haggling, including $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Enterprise
Repair comes first here. Hal welds on site and fixes what’s actually failing instead of hauling the gate off or swapping parts that don’t need swapping. The ornamental steel frame on most Enterprise drive gates is sound; it’s the hardware and the footings that wear out under this sun. That’s where we start. You can see the full scope on our Gate Parts & Welding page.
Hinge Replacement
A gate sags at the hinge post, not in the middle, and that’s where the diagnosis begins. In Enterprise’s planned subdivisions, we see hinges seizing and gate leaves dropping after several summers of 105-to-110°F heat on west-facing drive gates. We free or replace the hinge, correct the alignment, and re-hang the panel so it swings true before we call it done.

Post Replacement
When the hinge post has heaved or rotted, welding a new panel onto it just means you’ll fix it twice. We pull and reset the post, set the footing properly, and confirm the gate line again. Fix the panel without the post and you’ll pay for the same repair inside a year.

Rail Repair
Blowing dust and monsoon rain work on the factory finish over time, and a bent or cracked rail on an ornamental steel gate gets worse if it’s ignored. We repair the rail on site and match the finish as closely as the subdivision allows. If your CC&Rs call for a specific powder-coat color, we confirm that first.

Custom Welding
For a mangled latch post, a broken hinge bracket, or a one-off fix that doesn’t fit any catalog part, we weld it in your driveway. That matters in Enterprise, where a replacement gate has to match the exact iron style and finish the HOA approved. Custom welding keeps a repair on the approved design instead of forcing a whole-gate swap.
Trusted Brands We Service in Enterprise
We’re certified on nine major gate brands, and the ones that come up most on Enterprise drive and pedestrian gates are DoorKing entry systems, Elite, Mighty Mule, and LiftMaster accessories. We don’t claim to stock every part locally; what we do is diagnose accurately, source the right part fast, and get the operator or the hinge fixed on the schedule we promise. A keypad or safety photocell that fails in July usually gets handled within the same visit window.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Enterprise Homes
Most calls here follow the Valley’s climate and the age of the subdivisions, not the gate’s frame. Here’s what we run into most.
- Heaved hinge posts on sun-baked west-facing gates. The ornamental steel panel is fine, but the hinge post has shifted, so the leaf sags and drags. Re-hanging the panel on a sound post fixes it; ignoring the post doesn’t.
- Operator and safety photocell failures from UV and heat. Automatic swing and slide gates start reversing erratically before the gate metal shows any age, because the operator and the photo-eyes take the brunt of 105-to-110°F summers.
- Fading powder coat and seized hardware from dust and dry air. Near-zero humidity and blowing dust wear on hinges, latches, and gate rollers, so the moving parts fail well ahead of the frame.
- HOA design-review friction. A replacement gate or weld repair has to match the exact iron style, height, and finish the subdivision’s CC&Rs dictate, and getting that wrong means a second round with the management company.
Pricing for Gate Parts & Welding in Enterprise, NV
Here’s what gate parts and welding actually run in Enterprise, quoted upfront and agreed before any work starts.
| Service | Typical Enterprise Range |
|---|---|
| Hinge replacement (per hinge, drive or pedestrian gate) | $150 – $350 |
| Post replacement (reset hinge post and footing) | $300 – $750 |
| Rail repair (on-site weld and finish) | $175 – $450 |
| Custom welding on-site (bracket, latch, hinge point) | $150 – $400 |
| Gate rollers and latch/lock hardware | $120 – $300 |
What moves the number: whether it’s a weld repair or a full post reset, the finish and style the HOA design review requires, and whether the operator or a photocell needs attention while we’re there. Unlike a national outfit that quotes one price on the phone and charges another at the door, we hold the agreed number. The estimate is free, and seniors and veterans take 10% off permanently.
We Also Serve Cities Near Enterprise
We cover the neighborhoods and communities around Enterprise too, including Spring Valley, Paradise, Winchester, and Henderson. Same approach everywhere: identify the real failure, confirm any design rules, quote it upfront, and weld on site. If you’re in one of these nearby areas, mention it when you call and we’ll get you on the schedule. Learn more about Gate Parts & Welding in Enterprise.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Enterprise
Because your subdivision’s CC&Rs set the exact iron style, height, and finish for the gate, and a repair that changes any of that can be rejected. Enterprise’s master-planned communities are HOA-governed, so we read those standards before pricing a hinge, post, or weld. That keeps a repair on the approved design instead of forcing a whole-gate swap. Call (888) 292-7536 and we’ll talk through what your community requires.
Most often it’s the operator or the safety photocell, not the gate. On a west-facing automatic gate in Enterprise, intense UV and 105-to-110°F heat stress the operator and the photo-eyes until they fail, and the panel is still fine. We test both before recommending anything, then source the right part. Call (888) 292-7536 for a free estimate.
Because the sag starts at the hinge post, not the hinges. Tightening the hinges won’t fix a post that has heaved with the heat and footing movement, and the leaf will keep dropping. We correct the post and re-hang the panel so it swings true. Call (888) 292-7536 and estimates are free.
In most cases it can be re-welded on site, which keeps the gate on the style your HOA approved. A broken hinge bracket or latch post is a welding job, not a reason to swap the whole panel. Hal welds in your driveway, so the gate never leaves. Call (888) 292-7536 for an exact quote.
They work, but they take a beating here and fail earlier than they would in a shaded yard. Solar operators and keypads on sun-baked gates need the right placement and fresh batteries or panels to stay reliable through a Valley summer. We service DoorKing, Elite, Mighty Mule, and LiftMaster systems. Call (888) 292-7536 and estimates are free.
If your Enterprise gate is dragging, sagging, or the entry system quit on you, call (888) 292-7536 for a free estimate. A live person answers around the clock, the pricing is agreed before work starts, and the 90-Day Done Right Promise is stamped in writing on every job. The name is on the shop, and the shop is down the road.
Written by the team at Gatewood Fence & Gate Paradise.