Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
If a hinge has torn loose, a post has rusted through, or a weld finally gave up, we can help. We work gate parts and welding across Henderson, from the older single-story tracts off Boulder Highway to the iron gates behind the block walls in Green Valley and Seven Hills. We know this city’s subdivisions and the way they fail, and we quote the price before any torch touches metal. Call (888) 292-7536 and a live person picks up, day or night.

Why You Can Verify the Company Doing the Work in Henderson
Gatewood Fence & Gate Paradise has been locally owned and owner-operated since 2001, and the name is on the shop and on every invoice. That matters in a city where a lot of gate work gets handed to whoever answers a call first. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing. If something we fixed acts up, one call brings us back.
We know the Henderson geography without a map. A job near the Lake Mead Parkway corridor looks different from a pool gate in a master-planned community off Eastern Avenue. Iron that’s spent fifteen summers in Mojave sun doesn’t fail the way it does in wetter states: it rusts from the inside out, so the hinge looks fine until it snaps. That’s the sort of thing we check before we quote. Our crew is background-checked and uniformed, and the person who shows up is the person who stands behind the work. A gate sags in the hinge post, not in the middle – and that’s where we start.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson
Custom Welding
Most Henderson gate repairs can be welded right in your driveway. We don’t haul the gate off or swap parts that don’t need swapping. Cracked frames, broken pickets, torn hinge tabs, bent scrollwork – we cut out the bad metal, fit new steel, and weld it on site so the gate stays where it belongs. In an HOA community, we match the existing finish so the repair passes the architectural review.

Post Replacement
A wobbling gate almost always starts with a bad post, and in Henderson that post has been baked and sun-bleached for twenty years. We dig out the old footing, set a new steel or iron post in concrete, and re-hang the leaf to it. Fix the panel without the post and you’ll fix it twice. Replacing the post is what actually holds the gate level through the next monsoon season.

Hinge Replacement
Hinges seize, wallow out, and tear free when the gate’s been swinging on a tired post. We replace them with hardware rated for the leaf weight, weld the tabs solid, and re-align the gate so it swings square and latches clean. On the heavy wrought-iron driveway gates common off Warm Springs Road and in Green Valley, that often means reinforcing the hinge side before we call it done.

Rail Repair
Rail ends rust, weld joints crack, and a gate that took a windstorm knock starts dragging. We repair the rails and re-square the frame so the gate swings and latches properly again. For slide gates, a bent rail stresses the track and the drive, so getting it straight early saves an operator later. This is where our Gate Parts & Welding team does the careful metalwork that keeps a gate running for years.
Trusted Brands We Service in Henderson
We service nine major gate brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – and we know their common failure points in desert heat. When a LiftMaster or Elite operator is involved, we coordinate the mechanical repair with it so the gate and the drive work together instead of fighting. We don’t claim to stock parts or promise an overnight fix on a specialty component, but on standard hinges, posts, and ironwork we turn repairs around quickly. If your gate hardware is a brand we don’t list, call and we’ll tell you honestly whether we can help.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Henderson Homes
Henderson’s desert climate and its 1990s – 2000s housing stock leave a recognizable set of failures:

- Builder-grade operators wearing out early. Many gates in Green Valley, Seven Hills, and Anthem went in with a basic manual gate and no pre-wired power or conduit to the hinge post. When the original operator finally quits, a straight swap isn’t possible without running new power and low-voltage wire – a trench-and-conduit job, not a plug-in replacement.
- HOA standards that fail arc review. CC&Rs in Green Valley and Anthem dictate wrought-iron style, color, and height. A weld repair or post replacement has to match the community standard, or the architectural committee will send it back. We build to that.
- Monsoon damage. Microbursts and flash-flood wash events bend frames and throw swing and slide gates out of alignment, cracking hinges and straining rack-and-pinion drives. Wind loading on a gate that was never braced properly shows up fast.
- Pool-safety gates that stop self-latching. In 55+ communities like Sun City Anthem and Sun City MacDonald Ranch, a rusted iron pool-enclosure or side-yard gate that won’t self-latch is a Nevada pool-barrier safety issue, not just a nuisance.
Pricing for Gate Parts & Welding in Henderson, NV
Here’s roughly what gate work runs in Henderson’s market. A hinge replacement typically runs $120 – $260 per hinge, including welding and re-alignment. A post replacement usually lands between $350 – $750 depending on whether it’s a wood, steel, or iron post and how deep the footing has to go. Rail and frame welding runs $150 – $400. Custom welding on a broken gate frame or scrollwork runs $200 – $550. Adding a new power and conduit run for an operator upgrade is a bigger project – expect $600 – $1,800 depending on trench length and whether a dedicated circuit is needed. What moves the number: gate weight, material, accessibility, and whether the repair has to match an HOA finish. We quote the price up front and you agree to it before any work starts – no surprise invoice at the door. Estimates are free. Standing offers include $40 off any repair over $200 and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Henderson
We work beyond the Henderson line too. If you’re in Boulder City, Whitney, Paradise, or Enterprise, the same crew covers your gate. Browse Gate Parts & Welding in Henderson and the surrounding communities when you want to see the full picture of what we handle. Wherever your gate sits, call and we’ll tell you straight what it needs.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson
Usually yes, but most Henderson subdivisions built in the 1990s and 2000s left no power or conduit at the gate post, so adding an opener means running a new power line and low-voltage wire to the post – often a short trench rather than a driveway removal, depending on where the run can be routed. A qualified pro will check the post footing and gate alignment before installing the operator, because a sagging leaf and a new opener don’t get along. Call (888) 292-7536 for a free measure and a written price before any work is scheduled.
Because the sag is in the hinge post, not the hinge itself. In Green Valley and Seven Hills, iron posts that have spent decades in Mojave sun rust from the inside out, and tightening the hardware just re-seats the gate on a post that’s already failing. The fix is usually a post replacement or a re-set footing, not new hinges. We’ll show you what’s actually moving before quoting a repair – call (888) 292-7536 and estimates are free.
Yes. A pool-enclosure or side-yard gate that won’t close and self-latch on its own can fail Nevada’s pool-barrier safety requirements, and in a 55+ community that’s a real liability. The cause is usually rusted hinges and a post that’s shifted, which throws the latch out of alignment. It’s a repair we do regularly – call (888) 292-7536 and we’ll quote it before we start.
In most cases yes on the HOA side, and sometimes on permits for structural post work. Green Valley and Anthem CC&Rs specify wrought-iron style, color, and height, so any post replacement or new frame usually needs architectural review committee approval before it goes in. We build to the community standard so the repair passes that review. Call (888) 292-7536 and we’ll walk you through what your community typically requires.
Check that the safety photocells and any edge sensors respond when the gate’s path is blocked mid-travel – if the gate keeps moving or the sensors don’t react, entrapment protection has failed. On older builder-grade operators in Henderson, this is a common fault after years of heat and UV on the wiring and sensors. Don’t test it by standing in the gate’s path. Call (888) 292-7536 and we’ll have a trained pro check the operator safely; estimates are free.
If your gate is sagging, rusting, or simply not closing the way it should, let’s get it looked at. Call (888) 292-7536 for a free estimate – a live person answers around the clock, we quote the price before work starts, and every job carries the 90-Day Done Right Promise. The name is on the shop, and the shop is down the road.
Written by the team at Gatewood Fence & Gate Paradise.