Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Henderson
A gate that won’t latch, drags on the concrete, or stops halfway open is a repair job, and in Henderson it’s usually fixable the same week you call. Most of the gate calls we handle in Henderson are hinge-post, alignment and rust problems on ornamental iron, pool-safety and RV side-yard gates, and a good share get repaired in the driveway rather than torn out and replaced. We know the difference between a Green Valley HOA iron gate and an older Pittman tract gate, and that difference matters when you’re matching a community’s standard. A live person answers the phone around the clock at (888) 292-7536, and the price is quoted and agreed before anyone touches the gate.

Why Gatewood Fence & Gate Paradise Is Henderson’s Preferred Gate Repair Company
Henderson is a town of tight lots and shared driveways, so the working space is often the job. That shapes how we approach every repair here. The team you reach has a strong local reputation in Henderson, and our technicians have up to 25 years of experience – long enough to know that a sag lives in the hinge post, not the middle of the panel. Fix the panel without the post and you’ll fix it twice.
Every job carries the 90-Day Done Right Promise in writing: if it isn’t done right, one call brings us back to make it right, stated plainly and not buried in fine print. Calls get answered by a live person around the clock, so a gate that won’t close on a Sunday night in Sun City Anthem still gets a real voice. We’re certified to service nine major gate brands, including DoorKing and LiftMaster, which covers most of what’s already hanging in Henderson subdivisions.
The standing offers don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. The local pro who shows up is state-licensed and insured as Nevada requires, and the estimate you agree to is the number on the invoice.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Henderson
We focus on the repairs that actually come up in Henderson’s stucco-and-tile subdivisions and older downtown tracts. Our Gate Repair team handles hinge and post work, alignment, welding, rust and the electric and automatic gates those posts carry.
Electric Gate Repair in Henderson
Electric gates in Henderson take a beating from Mojave heat and UV, and the control board, battery backup or actuator is often the first thing to fail. We diagnose the electrical side on LiftMaster and DoorKing operators and get the gate moving again. Safety loops, photocells and any power work get handled by a trained professional, not a homeowner on a ladder.
Automatic Gate Repair in Henderson
Automatic slide gates on tight shared driveways are common around Green Valley and Seven Hills, and they go out of square over time – the rack and pinion binds and the gate stops self-latching. We check the operator, the travel limits and the sensors together so it opens and closes clean. Expect a Henderson automatic gate repair to run $240–$520 depending on the operator and the parts.
Hinge & Post Repair in Henderson
Most of the sagging iron gates we see in Henderson trace back to a hinge post footing that shifted after a monsoon microburst or a flash-flood wash. We reset and re-weld the post footing first, then re-hang the gate so it closes on its own. Hinge and post repair in Henderson typically runs $180–$400, and on-site welding means the gate stays in your driveway instead of going to a shop.
Gate Realignment in Henderson
After 15-plus years of desert sun and heat, posts and frames expand and contract and the gate throws itself out of line. We straighten the panel, correct the sag and reset the latches so it swings true. Realignment in Henderson runs $150–$340 and we always correct the post, not just the panel.

Trusted Brands We Service in Henderson
We’re certified to service nine major gate brands: LiftMaster, DoorKing, FAAC, BFT, Linear, Viking, Ghost Controls, Elite and Mighty Mule. We don’t claim to stock every part locally – that’s a false promise, and any gate outfit that says otherwise is guessing. What we do is source the right part and turn the repair around fast, so a LiftMaster or DoorKing operator that quit on you in Green Valley gets back to work without a long wait. Mighty Mule and Elite swing and slide operators are all in the mix too.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Henderson Homes
- Powder-coat baked off, rust from the inside out. After 15-plus years of Mojave UV, iron gates rust along the welds and the bottom rail long before you see it from the outside, so weld and rust repair is routine here.
- Hinge post footing undermined by wind and washes. Monsoon microbursts and flash-flood washes shift the footing, so an iron swing gate drops and drags even after the panel looks straight.
- Slide gates out of square on tight shared driveways. The rack and pinion binds and the gate stops self-latching – the tighter the site, the more this shows up in Green Valley and Anthem.
- Pool-barrier gates in 55+ communities that won’t self-latch. In Sun City Anthem and Sun City MacDonald Ranch, a sagging pool-enclosure or side-yard gate that no longer self-latches is a Nevada pool-barrier safety issue, not just an annoyance.
Pricing for Gate Repair in Henderson, NV
We quote up front and the price is agreed before any work starts – no surprise invoice at the door. For this Henderson market, a typical hinge and post repair runs $180–$400, gate realignment $150–$340, weld and rust repair $140–$320, and automatic gate repair $240–$520 depending on the operator and parts. Lock repair and small hardware fixes usually land in the $90–$180 range. What moves the number is the post footing condition, whether on-site welding is needed, and how tight the site is. The estimate is free, and you get a free second opinion on any written estimate plus $40 off any repair over $200.
We Also Serve Cities Near Henderson
When Henderson work is done, we also cover the neighboring communities – Boulder City, Whitney, Paradise and Enterprise. Whether you’re on a shared driveway in Henderson or out toward Boulder City, the same repair-first approach applies. If you’re nearby and weighing a fix, Gate Repair in Henderson is where most of our local calls start.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Henderson
Most gate repairs in Henderson run $140–$520 depending on the problem. Hinge and post repair is typically $180–$400, realignment $150–$340, weld and rust repair $140–$320, and automatic gate repair $240–$520. You’ll get a written price agreed before work starts, and estimates are free – call (888) 292-7536 for an exact quote.
Often we can, because a live person answers around the clock and repair work in Henderson is where same-day response is realistic. Call (888) 292-7536 and we’ll tell you straight whether today works for your gate.
Yes, in HOA-governed subdivisions like Green Valley and Anthem the CC&Rs specify iron style, color and height, so a replacement panel or re-powder-coated frame has to match the community standard and often clear an ARC review before it goes back up. That’s why a repaired gate here has to be visually re-certified as much as mechanically fixed. Repairs can run $180–$400 for the structural side plus finishing, and a free estimate gets you a real number – call (888) 292-7536.
Because the panel was straightened but the hinge post footing wasn’t fixed. The sag lives in the hinge post, often undermined by monsoon windstorms and flash-flood washes, so the gate drops again. Correct the footing first, then re-hang – call (888) 292-7536 for a free second opinion on any written estimate.
Yes, that’s the safety loop or photocell doing its job, and it’s required to keep a moving gate from hitting a person. If the gate stops when nothing’s there, the sensor is faulty and needs a trained pro, since it’s electrical work. Call (888) 292-7536 for a free estimate and we’ll check the sensors and operator together.
If your gate is dragging, sagging, rusting or won’t self-latch, the fastest path is a call. Reach us at (888) 292-7536 for a free estimate – a live person answers around the clock, the price is quoted and agreed before any work starts, and the 90-Day Done Right Promise is on every job in writing.
Written by the team at Gatewood Fence & Gate Paradise.