A Gatewood company - serving Paradise, NV
Gate Parts & Welding in Henderson, NV | Gatewood Fence & Gate Paradise - Gatewood Fence & Gate Paradise

Gate Parts & Welding in Henderson - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Henderson

If a hinge has torn loose, a post has rusted through, or a weld finally gave up, we can help. We work gate parts and welding across Henderson, from the older single-story tracts off Boulder Highway to the iron gates behind the block walls in Green Valley and Seven Hills. We know this city’s subdivisions and the way they fail, and we quote the price before any torch touches metal. Call (888) 292-7536 and a live person picks up, day or night.

Metalworker performing custom gate fabrication and professional welding services on a metal gate in Henderson, NV

Call (888) 292-7536

Why You Can Verify the Company Doing the Work in Henderson

Gatewood Fence & Gate Paradise has been locally owned and owner-operated since 2001, and the name is on the shop and on every invoice. That matters in a city where a lot of gate work gets handed to whoever answers a call first. Our technicians have up to 25 years of experience, and every job carries the 90-Day Done Right Promise in writing. If something we fixed acts up, one call brings us back.

We know the Henderson geography without a map. A job near the Lake Mead Parkway corridor looks different from a pool gate in a master-planned community off Eastern Avenue. Iron that’s spent fifteen summers in Mojave sun doesn’t fail the way it does in wetter states: it rusts from the inside out, so the hinge looks fine until it snaps. That’s the sort of thing we check before we quote. Our crew is background-checked and uniformed, and the person who shows up is the person who stands behind the work. A gate sags in the hinge post, not in the middle – and that’s where we start.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Henderson

Custom Welding

Most Henderson gate repairs can be welded right in your driveway. We don’t haul the gate off or swap parts that don’t need swapping. Cracked frames, broken pickets, torn hinge tabs, bent scrollwork – we cut out the bad metal, fit new steel, and weld it on site so the gate stays where it belongs. In an HOA community, we match the existing finish so the repair passes the architectural review.

Custom Welding

Post Replacement

A wobbling gate almost always starts with a bad post, and in Henderson that post has been baked and sun-bleached for twenty years. We dig out the old footing, set a new steel or iron post in concrete, and re-hang the leaf to it. Fix the panel without the post and you’ll fix it twice. Replacing the post is what actually holds the gate level through the next monsoon season.

Post Replacement

Hinge Replacement

Hinges seize, wallow out, and tear free when the gate’s been swinging on a tired post. We replace them with hardware rated for the leaf weight, weld the tabs solid, and re-align the gate so it swings square and latches clean. On the heavy wrought-iron driveway gates common off Warm Springs Road and in Green Valley, that often means reinforcing the hinge side before we call it done.

Hinge Replacement

Rail Repair

Rail ends rust, weld joints crack, and a gate that took a windstorm knock starts dragging. We repair the rails and re-square the frame so the gate swings and latches properly again. For slide gates, a bent rail stresses the track and the drive, so getting it straight early saves an operator later. This is where our Gate Parts & Welding team does the careful metalwork that keeps a gate running for years.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 292-7536

Trusted Brands We Service in Henderson

We service nine major gate brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – and we know their common failure points in desert heat. When a LiftMaster or Elite operator is involved, we coordinate the mechanical repair with it so the gate and the drive work together instead of fighting. We don’t claim to stock parts or promise an overnight fix on a specialty component, but on standard hinges, posts, and ironwork we turn repairs around quickly. If your gate hardware is a brand we don’t list, call and we’ll tell you honestly whether we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Henderson Homes

Henderson’s desert climate and its 1990s – 2000s housing stock leave a recognizable set of failures:

Professional welder grinding metal joints during custom gate repair work in Henderson, NV
  • Builder-grade operators wearing out early. Many gates in Green Valley, Seven Hills, and Anthem went in with a basic manual gate and no pre-wired power or conduit to the hinge post. When the original operator finally quits, a straight swap isn’t possible without running new power and low-voltage wire – a trench-and-conduit job, not a plug-in replacement.
  • HOA standards that fail arc review. CC&Rs in Green Valley and Anthem dictate wrought-iron style, color, and height. A weld repair or post replacement has to match the community standard, or the architectural committee will send it back. We build to that.
  • Monsoon damage. Microbursts and flash-flood wash events bend frames and throw swing and slide gates out of alignment, cracking hinges and straining rack-and-pinion drives. Wind loading on a gate that was never braced properly shows up fast.
  • Pool-safety gates that stop self-latching. In 55+ communities like Sun City Anthem and Sun City MacDonald Ranch, a rusted iron pool-enclosure or side-yard gate that won’t self-latch is a Nevada pool-barrier safety issue, not just a nuisance.

Pricing for Gate Parts & Welding in Henderson, NV

Here’s roughly what gate work runs in Henderson’s market. A hinge replacement typically runs $120 – $260 per hinge, including welding and re-alignment. A post replacement usually lands between $350 – $750 depending on whether it’s a wood, steel, or iron post and how deep the footing has to go. Rail and frame welding runs $150 – $400. Custom welding on a broken gate frame or scrollwork runs $200 – $550. Adding a new power and conduit run for an operator upgrade is a bigger project – expect $600 – $1,800 depending on trench length and whether a dedicated circuit is needed. What moves the number: gate weight, material, accessibility, and whether the repair has to match an HOA finish. We quote the price up front and you agree to it before any work starts – no surprise invoice at the door. Estimates are free. Standing offers include $40 off any repair over $200 and a permanent 10% discount for seniors and veterans.

We Also Serve Cities Near Henderson

We work beyond the Henderson line too. If you’re in Boulder City, Whitney, Paradise, or Enterprise, the same crew covers your gate. Browse Gate Parts & Welding in Henderson and the surrounding communities when you want to see the full picture of what we handle. Wherever your gate sits, call and we’ll tell you straight what it needs.

Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Henderson

Why Henderson Chooses Gatewood Fence & Gate Paradise

We set the standard for gate parts & welding in Henderson.

30-60 Min Response

Fast dispatch across Henderson. Same-day and after-hours emergency service available.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Henderson

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Henderson - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Henderson Customers Say

Trusted by homeowners across Henderson and surrounding areas.

★★★★★

"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."

Otis Redmond
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."

Judith Stallworth

Ready for Gate Parts & Welding in Henderson?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and here with fast after-hours help in Henderson.

(888) 292-7536

Request a Free Estimate in Henderson

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch