Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Boulder City
If you’ve got a sagging gate, a seized latch, or a hinge post that’s gone soft at the footing, you’re in the right place. We handle gate parts and welding in Boulder City the way it should be handled: the repair happens in your driveway, not at some shop across the valley. Boulder City is a small town with old gates, and most of them were hung long before anyone thought about modern openers or modern hardware. That takes a specialist who knows what they’re looking at.

Call (888) 292-7536 and a live person picks up. No voicemail. No queue three states away. If your gate has failed and you need eyes on it today, we’ll tell you straight on the phone whether it’s an emergency or something that can wait for a scheduled visit.
Why Gatewood Fence & Gate Paradise Is Boulder City’s Preferred Gate Parts & Welding Company
Boulder City homeowners have been burned by the national outfits that quote one price on the phone and charge another at the door. We’re the opposite of that. Every price is quoted, agreed, and confirmed before any work starts, and every job carries our 90-Day Done Right Promise in writing. If something fails inside 90 days, one call brings us back. That’s stamped on the job, not buried in fine print.
Our technicians have up to 25 years of experience, and they’ve spent years working on the older gates that dominate this town. We’re certified to service nine major gate brands, including DoorKing and Elite, and we handle on-site welding so your gate never leaves the property. Nothing gets hauled off to a shop down the road in another city.
Response time to Boulder City is quick. We know the roads, we know the ZIP codes (89005 and 89006), and we know what’s likely wrong before we get out of the vehicle. That’s the advantage of working the same town repeatedly. Standing offers apply here too: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate you’ve already got in hand, and a permanent 10% discount for seniors and veterans.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Boulder City
We focus on the work older gates actually need. Our Gate Parts & Welding team handles the four services below across Boulder City, and we lean toward repair over replacement wherever the gate is worth saving.
Hinge Replacement
Original 1930s forged-iron hinges crack or seize from decades of UV and sand abrasion. We don’t swap in whatever box-store hinge happens to fit; we look at the geometry, the gate weight, and the post condition first. A gate sags in the hinge post, not in the middle, and that’s where we start. In the Historic District, that often means matching period hardware rather than a modern kit.

Post Replacement
Sagging gates almost always trace back to a rotted post footing, especially on the alley-facing gates behind 1930s and 1940s homes. We excavate the old post, pour a proper footing, and set a replacement that holds a load. Fix the panel without the post and you’ll fix it twice. Most of the post work in Boulder City is that same story, just a different address.

Rail Repair
Cracked rails, fatigued welds, and bent top rails are common on older wrought-iron gates. We weld on-site, which means the gate stays hung and aligned while we repair. A rail repair in Boulder City usually runs $150 – $350 depending on length and whether the joint needs to be cut out first.

Custom Welding
When the original hardware is too far gone to buy off the shelf, we fabricate. That might be a replacement latch for a 90-year-old forged-iron gate or a new bracket to seat a modern operator on an old post. Custom welding in Boulder City typically lands between $200 and $600, based on the complexity of the piece and whether the gate needs to come down for the weld.

Trusted Brands We Service in Boulder City
We work on DoorKing and Elite systems regularly, along with Mighty Mule and LiftMaster, plus the other brands in our certified lineup. We don’t stock parts at a Boulder City location, but we can usually identify what’s needed on the first visit and get it sourced within a couple of days. For older operators with obsolete control boards, we’ll tell you honestly whether a replacement board exists or whether the smarter move is a retrofit. No upselling. No surprises at the invoice.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Boulder City Homes
- Hinge post rot at the footing. Decades of summer heat and winter freeze-thaw cycles break down the concrete and wood at the footing first, and the gate starts dragging. It looks like a hinge problem and it’s almost always a post problem.
- Obsolete control boards in legacy operators. Gate openers installed in the 1980s and 1990s often fail on the board itself, and the part no longer exists. That’s when we look at whether modern safety features (photocells, loop detectors) can be retrofitted to keep the gate operational and compliant.
- Cracked original 1930s forged-iron hinges and latches. The federal housing plan standardized much of the hardware on Boulder City’s Historic District gates, and 90 years of UV and sand have taken their toll. Repairing means matching the original, not swapping it.
- Sun-baked and wind-abraded weld joints. Steel that’s been painted once in 40 years oxidizes at the weld seams, and the joint fails before the frame does. A weld repair is usually cheaper than a panel replacement if the frame is still sound.
Pricing for Gate Parts & Welding in Boulder City, NV
Our pricing is quoted and agreed before any work starts. A typical hinge replacement in Boulder City runs $125 – $275 per hinge. Hinge post replacement with a new footing usually falls between $350 and $650. Rail repair runs $150 – $350, and custom welding runs $200 – $600 depending on the piece. Retrofitting modern safety features onto a legacy operator runs $250 – $500 plus parts, and full operator replacement runs $900 – $1,800 installed.
What moves the number: whether the gate needs to come down, whether the footing has to be excavated, and whether the hardware is original (matching 90-year-old forged iron takes longer than a modern swap). If you’ve got a written estimate from someone else, we’ll give you a free second opinion on it. Call (888) 292-7536 for an exact quote. Estimates are free, and we don’t charge a trip fee inside the county.
We Also Serve Cities Near Boulder City
Our Boulder City work is part of a wider service area. We also handle gate parts and welding for neighbors in Henderson, Whitney, Paradise, and Enterprise. Henderson’s newer stucco-and-block tract homes need different fixes than Boulder City’s 1930s stock, and we adjust the approach accordingly. If you’re outside Boulder City and want to know whether we cover your address, call and ask.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Boulder City
Usually yes, if the original hinge can be repaired or matched. Boulder City’s Historic District gates often carry original 1930s forged-iron hinges standardized across the federal housing plan, and we can fabricate a replacement when we can’t source one. In some cases the post is the real problem, not the hinge, and we’ll tell you that on the first visit. Call (888) 292-7536 for a free estimate.
Often yes, and it’s usually cheaper than a full operator replacement. We retrofit modern UL 325-compliant safety photocells and loop detectors onto legacy operators when the motor and gearbox are still sound. If the drive is shot too, that’s when replacement becomes the cheaper answer, and we’ll walk you through both numbers before you decide. Call (888) 292-7536 for a free estimate.
It affects exterior changes on properties within the Historic District, and it usually doesn’t affect a straight repair. Replacing period hardware with modern parts, or substantially altering a gate’s appearance, can trigger review. Repairing and matching the original forged iron almost never does. We know the difference and we’ll flag it before we start. Call (888) 292-7536 for a free estimate.
The housing stock and the climate work together. Boulder City’s gates are older (many from the 1930s – 1950s) and sit on compact, sun-baked lots where the footing takes the brunt of summer heat and winter freeze-thaw, so post rot sets in faster. Henderson’s newer tract-home gates are usually hung on modern posts with modern footings. Call (888) 292-7536 for a free estimate.
Yes. Ghost Controls is one of the nine brands we’re certified to service, along with DoorKing, Elite, Mighty Mule, LiftMaster, FAAC, BFT, Linear, and Viking. Solar openers need their panels and batteries checked alongside the operator itself, especially in Boulder City’s intense UV and heat. Call (888) 292-7536 for a free estimate.
When your gate needs parts or welding, you want someone who shows up on time, quotes a price that doesn’t change at the door, and stands behind the work with a written 90-Day Done Right Promise. That’s what we do. Call (888) 292-7536 for a free estimate in Boulder City today. A live person answers, day or night. Seniors and veterans get 10% off, every job, every time.
Written by the team at Gatewood Fence & Gate Paradise.