A Gatewood company - serving Paradise, NV
Gatewood Fence & Gate Paradise gate repair team

Gate Installation Cost in Paradise - Honest Price Ranges, Free Written Quote

Real local price ranges for the work, then a free site survey and a written quote for your driveway. Groundworks, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Installation Cost in Paradise?

Gate installation in Paradise typically costs $1,800 to $4,800 for a single driveway gate, or $2,400 to $7,200 when you add automation. A basic pedestrian or garden gate runs $650 to $1,600. Those ranges reflect the 2026 Paradise market, and they’re the numbers we quote from most weeks when someone calls the shop.

The short answer nobody wants to hear: the price depends on the gate, not the installer. A 12-foot single swing gate in steel costs a different world than a 16-foot dual swing with a LiftMaster operator and a keypad. What we can do is put real numbers in front of you so you know what’s fair before anyone sets foot on your property. Gatewood Fence & Gate gives free estimates, and the estimate you get on the phone is the estimate on the invoice.

Key Takeaways

  • Typical installed cost: $1,800 to $4,800 for a single driveway gate; $2,400 to $7,200 once you add an opener.
  • Pedestrian/garden gates: $650 to $1,600 installed.
  • Automation adds $900 to $2,400 depending on the operator brand and whether you want access control.
  • The gate, the posts, and the grade matter more than the labor rate. A crooked post is the most common reason a new gate fails early.
  • We service nine major brands including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule, so the operator you already own can often be reused.

Gate Installation Cost Breakdown (2026)

Here’s how the money breaks down on a job in Paradise. These are line-item ranges for the local market, not a national average copied off some lead-generation site.

Line Item Typical Cost Range
Pedestrian gate (3 to 5 ft, steel or aluminum) $650 – $1,600
Single swing driveway gate (10 to 14 ft) $1,800 – $3,400
Dual swing driveway gate (12 to 16 ft) $3,200 – $5,800
Sliding driveway gate (12 to 20 ft) $2,900 – $6,200
Swing gate opener (single arm) $900 – $1,800
Sliding gate operator $1,300 – $2,400
Keypad or remote access control $250 – $650
New concrete footings and posts $400 – $1,200
Welding and on-site fabrication $150 – $500
Permit and HOA approval coordination $75 – $350

What pushes a job toward the top of those ranges: heavy steel or wrought iron over lightweight aluminum, steep or uneven grades, hard rock or caliche under the footing line (we hit it plenty in the newer Paradise subdivisions), and access control. What pulls it back down: a gate that fits a standard opening, level ground, and an operator you already own that’s still in good working order.

One thing we say a lot, and we mean it: show me the gate closing on its own and I’ll show you where it’s failing. A lot of “new gate” calls turn out to be a post problem or a hinge problem. We repair first, and we’ll tell you straight if replacement is the honest answer. If you want the full picture on what a proper install looks like, see our Gate Installation in Paradise page.

What Affects Gate Installation Pricing in Paradise?

  • Gate material and weight. Aluminum is lighter and cheaper up front. Steel and wrought iron cost more and last longer, but they also demand heavier posts and a stronger operator, which adds to the total.
  • Grade and soil. A gate on a slope needs a different hinge geometry and a heavier footing. In Paradise neighborhoods where the ground is packed hard, footing excavation alone can add a few hundred dollars and an extra hour or two.
  • Power at the gate. If there’s no electrical service near the gate line, running power for an automatic opener adds cost. Low-voltage solar operators from Ghost Controls or Mighty Mule sidestep that, and we’ll walk you through both options.
  • HOA and permit requirements. Paradise has active HOAs in a number of communities, and they often dictate gate style, height, and color. Getting approval up front saves you a rebuild later. We help coordinate the paperwork.
  • Access control complexity. A single keypad is cheap. Multi-tenant access with call boxes, vehicle loops, or DoorKing entry systems is a bigger project, and the wiring is where the money goes.
  • Whether the operator gets reused. If your old opener is sound, we’ll reuse it. We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the odds are good we can keep what you have.

How to Save on Gate Installation

Nobody installs a gate often enough to become a good shopper at it, so here’s what actually moves the number.

  1. Get quotes in writing before anyone digs. Compare line items, not bottom lines. A cheap total that hides footing costs isn’t cheap.
  2. Reuse your operator if it’s healthy. A good opener is half the cost of a new one. We’ll test yours before we ever recommend replacing it.
  3. Bundle the repair in. If a post needs adjusting or a hinge is worn, doing it during the install costs less than a second visit. The $40-off-any-repair-over-$200 offer applies.
  4. Ask about standard sizing. Gates that fit a standard opening usually cost less than custom geometry. Sometimes an inch or two matters.
  5. Get a second opinion – free. We offer a free second opinion on any written estimate. We’ll tell you if it’s fair. If it is, we’ll say so.
  6. Seniors and veterans get 10% off, permanently. Not a seasonal promo. It’s on the books year round.

There’s no trip charge inside the county, and the estimate is free. That means it costs you a phone call to know exactly what a gate runs in Paradise. Call (888) 292-7536 and a live person picks up – any hour, any day.

How the Installation Process Works

This is a short walkthrough so you know what you’re paying for. It’s not a DIY guide – digging footings and setting gate posts correctly is real work, and getting it wrong means the gate fails in a couple of years.

  1. Site visit and measurement. We measure the opening, check the grade, and inspect the soil condition where the footings will go. Expect 30 to 45 minutes.
  2. Written estimate. Line-item, in writing, before a single tool comes off the truck. This is where the free second-opinion offer comes in handy if you have another quote.
  3. Permit and HOA coordination. We handle the paperwork and the HOA submittal where required. You sign, we file.
  4. Footing excavation and concrete. Posts get set in concrete to the correct depth. In Paradise that often means a day of cure time, so this is where the schedule gets honest.
  5. Gate hang and alignment. Gate goes on the posts, then we align the hinges, check the swing, and adjust the latch.
  6. Operator install and programming. If you’re automating, this is where the opener, remotes, keypad, and safety sensors go in.
  7. Final walk-through. We show you the gate closing on its own, test every remote, and hand you the 90-Day Done Right Promise in writing.

Every job carries the 90-Day Done Right Promise. If it’s not done right, we come back and make it right. One call, no runaround. That’s stamped on the invoice, not buried in fine print.

What a Cheap Gate Really Costs

A gate that costs $800 less today often costs more in two years. We see it constantly: a lightweight gate hung on posts that were undersized for the load, or an operator wired in a way that fails the first hot summer. The gate sags in the hinge post, not in the middle – and that is where we start. A lot of the “install” calls we get in Paradise turn into fixing somebody else’s shortcut.

Here’s the part we won’t budge on: if we can repair and weld it on site, we will. Fix the panel without the post and you’ll fix it twice. That’s the reason our first question on any job is about the post and the footing, not the panel.

Is It Cheaper to Repair or Replace a Gate in Paradise?

Repair is almost always cheaper when the frame is sound – typically $150 to $600 versus $1,800-plus for a full replacement. For a gate that’s sagging, sticking, or dragging, the problem is usually the hinge post or the hardware, and on-site welding fixes it in an afternoon. If the frame is cracked through, the posts are rotted out, or the gate has already been patched twice, replacement is honest. We’ll tell you which, and we don’t get paid more either way.

FAQs – Gate Installation Cost

How much does a driveway gate cost installed in Paradise?

A single swing driveway gate runs $1,800 to $3,400 in Paradise; a dual swing gate runs $3,200 to $5,800. Adding an automatic opener brings the total to $2,400 to $7,200. Call (888) 292-7536 for an exact quote – estimates are free.

What’s the cheapest gate I can install in Paradise?

A pedestrian or garden gate is the least expensive option, at $650 to $1,600 installed. A basic single swing driveway gate with no automation is the next step up, at around $1,800 to $2,600. Call (888) 292-7536 and we’ll give you a real number for your opening.

How much does gate installation cost with a motor?

Automating a gate adds $900 to $2,400 in Paradise depending on the operator brand and whether you need access control. A single-arm swing opener runs $900 to $1,800; a sliding gate operator runs $1,300 to $2,400. Call (888) 292-7536 for a free quote.

Do you need a permit to install a gate in Paradise?

Permit requirements vary by neighborhood and HOA in Paradise, and many installations do need one. Budget $75 to $350 for permit and HOA coordination. We handle the paperwork and submittal; the local professional we connect you with is licensed and insured as Nevada requires. Call (888) 292-7536 to ask about your specific property.

Can you install a gate in Paradise the same day?

Small pedestrian gates can sometimes be installed in a single day, but driveway gates with new footings typically take 2 to 5 days from measurement to final walk-through because concrete needs to cure. Call (888) 292-7536 and we’ll give you a real schedule, not an optimistic one.

Get a Real Number for Your Gate

Gates are one of those things where the honest answer is specific to the property. What size, what grade, what soil, whether you want a motor – none of that can be nailed down over an email. Call us and a live person answers, any hour, any day. We’ll walk you through the ranges for your situation, and if you decide to move forward, we’ll be there ourselves to take a look. No trip charge inside the county, free second opinion on any written estimate, 10% off permanently for seniors and veterans, and $40 off any repair over $200.

Call (888) 292-7536 for a free estimate. The name is on the shop, and the shop is down the road – that’s the oldest accountability there is.

Pricing reflects the Paradise market as of 2026. Gatewood Fence & Gate Paradise offers free estimates – call (888) 292-7536.

What Our Customers Say

★★★★★ 4.8 from 6+ reviews

"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."

- Otis Redmond

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

- Winston Achterberg

"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."

- Judith Stallworth
Need Gate Repair help in Paradise? Licensed & insured · 30-60 min response · free estimates
Call (888) 292-7536

Request a Free Estimate

Tell us what's going on in Paradise. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch