Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterWhat Driveway Gate Installation Costs in Paradise, NV: The Honest Range
Most driveway gate installation in Paradise runs $800 to $3,500 depending on whether your existing posts can be salvaged. A single swing iron gate hung on sound existing posts typically lands at $800-$1,400; a new dual-swing or slide gate on fresh footings runs $1,800-$3,500. The number that matters isn’t the gate catalog price – it’s what’s already in your ground. Call (888) 292-7536 for a free estimate and we’ll tell you straight which side of that range your property falls on.
Here’s the part the online calculators skip: if your house was built between 1965 and 1985 on a block east of the Strip, there’s a decent chance you already have steel posts in the ground. Whether those posts are still plumb and sound determines whether your installation starts at $800 or $2,200. That single fact drives more of the price than the gate style, the finish, or the brand of opener you pick.
Why Paradise Addresses Price Differently Than a Clean Suburban Lot
Paradise is a built-up unincorporated urban strip, not a master-planned suburb. Gate work here happens on mixed commercial-residential frontage along Las Vegas Blvd, Flamingo, and Tropicana – everything from casino service gates to iron pedestrian gates on mid-century motels. That mix of high-turnover commercial gates and aging residential iron on the same block is what makes Paradise gate work different from nearby Henderson or North Las Vegas.
Three site conditions show up again and again on Paradise driveways, and each one moves the price:
Caliche hardpan and post footings
Much of this ground is caliche – a cemented layer that turns a shovel into a joke. New post footings here usually need hammer drilling, sometimes a rotary hammer and a lot of patience, before we pour concrete. That labor is baked into any quote for fresh footings, and it’s why a “dig and set” estimate from a company that’s never worked Paradise soil often grows once they hit the hardpan.
Reusable wrought iron from the 1960s and 1970s
On older residential blocks, original iron gates often have sun-baked, brittle welds that snap rather than bend. That’s not a reason to replace the gate – it’s a reason to weld it on site and hang a new gate on the frame you already own. Fix the panel without the post and you’ll fix it twice, so we check plumb and soundness before recommending anything.
Narrow driveways that rule out a swing gate
1960s and 1970s lots frequently have tighter driveways than modern construction allows for. Swing clearance needs room for the panel to travel; when it isn’t there, a slide gate solves the problem without widening the driveway. That’s a design decision made on your property, not over the phone.
Paradise Driveway Gate Installation: Real Installed Ranges
These are the two scenarios we see most on Paradise properties. Every job is quoted upfront in writing before we start – the price on the ticket is the price you pay.
| Scenario | Typical Installed Cost |
|---|---|
| Single swing iron gate on existing salvageable posts (re-weld, re-hang, align) | $800 - $1,400 |
| New dual-swing gate with fresh footings (caliche drilling, concrete, hang, hardware) | $1,800 - $2,800 |
| New slide gate with fresh footings on wider commercial-residential frontage | $2,200 - $3,500 |
| Code-compliant pool-gate hinge and latch set (added when installation includes pool access) | $80 - $150 |
| On-site welding for frame modification or hinge placement | Included – no hauling fee |
Want the full picture of what’s involved in a new gate from the ground up? See our Gate Installation in Paradise page for the materials and process side. For everything we handle across repair, motors, and access control, start at the home page.
What Changes the Price: A Checklist for Paradise Homeowners
Before you call anyone, walk your own driveway and check these. It’ll make the estimate faster and keep you from being surprised:
- Post condition. Grab the hinge post and rock it. If it moves, the post is failing – and a gate sags in the hinge post, not in the middle. That’s where we start.
- Plumb and square. A gate that closes on its own is telling you where it’s failing. Watch it swing and you’ll learn something.
- Weld condition. Heat-fatigued welds on old iron are common here. We check them before quoting a repair versus a replacement.
- Swing clearance. Measure the room your gate has to travel. If it’s tight, a slide gate may be the honest answer.
- Pool access. If your gate is a pool gate, code-compliant self-closing, self-latching hardware is required, not optional.
Pool gates carry an extra line item in Paradise
Nevada child-safety code requires self-closing, self-latching hardware rated to spec on any gate that provides pool access – and it has to be installed correctly or the gate fails inspection. That’s why you’ll see a separate $80-$150 line for hinge and latch sets when installation includes pool access. It’s not an upsell. It’s the code, and it’s what keeps a child out of the water.
What “On-Site Welding” Actually Saves You
Frame modifications and hinge placement happen in your driveway, not at a shop miles away. That means no hauling fee, no waiting a week for the gate to come back, and a fit done to your actual opening – not a template. Our technicians have up to 25 years of experience, and they’re background-checked and in uniform on every job. When the opening is out of square (and on mid-century Paradise properties, it often is), welding on site is the difference between a gate that closes true and one that was close enough at the shop.
We’re certified to service nine major gate brands, including LiftMaster and FAAC on the drive and Mighty Mule on lighter residential setups. If your opener needs attention during the install, we handle that too – and we answer the phone with a live person 24 hours a day, not a voicemail or a call center three states away.
How a Paradise Gate Installation Actually Goes
- Free on-site estimate. We look at the posts, the ground, the clearance, and the code requirements. Price is quoted upfront and in writing before any work starts.
- Post assessment. Reusable posts get cleaned, set plumb, and re-welded. Failed posts come out and new footings get drilled through the caliche and poured.
- Gate hang and weld. The gate goes up on your actual opening and the hinges are welded where they belong, on site.
- Hardware and code compliance. Latch, hinge, and – where pool access applies – self-closing, self-latching hardware to spec.
- Walk-through and the 90-Day Done Right Promise. Stamped in writing on the job ticket. If the gate sags, sticks, or the latch doesn’t catch within 90 days, we come back and fix it, no charge.
Standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Upfront pricing is a promise, not a footnote – the number we quote is the number on the invoice.
FAQs
Driveway gate installation in Paradise typically costs $800-$1,400 for a single swing gate on salvageable existing posts, or $1,800-$3,500 for a new dual-swing or slide gate on fresh footings. The final number depends on post condition, caliche drilling, and swing clearance more than gate style. Call (888) 292-7536 for an exact quote – estimates are free and always in writing.
Repair is usually cheaper when the posts are sound – re-welding heat-fatigued iron and re-setting hinges on a good frame often costs a fraction of a full replacement. Replacement makes sense when posts are failing or the opening is out of square beyond what welding can correct. We’ll tell you which side you’re on after we look, and a free second opinion on any written estimate is standing policy. Call (888) 292-7536.
Often, yes – 1960s and 1970s Paradise lots frequently have driveways too narrow for a swing gate to clear. A slide gate installs within the same footprint without widening the driveway. We measure the actual clearance on your property and quote the option that works. Call (888) 292-7536 to schedule the estimate.
We aim for same-day estimates when the schedule allows, and a live person answers the phone 24 hours a day, 7 days a week. Call (888) 292-7536 with your address and we’ll tell you honestly what the window looks like.
Get a Straight Number on Your Paradise Gate
The name is on the shop and the shop is down the road, so you know who to call back. If your Paradise driveway has posts worth saving, we’ll weld and hang and leave you with a documented guarantee. If they’re not, we’ll explain why. Call (888) 292-7536 for a free estimate, upfront pricing, and a 90-Day Done Right Promise stamped in writing on your job ticket.
Written by the team at Gatewood Fence & Gate Paradise, serving Paradise, NV.
What Our Customers Say
"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth