Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Las Vegas
If your driveway gate is dragging on the concrete, refusing to latch, or the operator runs but the gate won’t move, we can help. We’ve worked gates across the valley long enough to know that most “bad hinge” calls in Las Vegas are really wall-anchor and alignment problems, and that changes how the job gets done. Call (888) 292-7536 and a live person will pick up, day or night.

Why Gatewood Fence & Gate Paradise Is Las Vegas’s Preferred Gate Repair Company
We’re an owner-operated gate shop, not a call center with a rotating cast of helpers. The name goes on the invoice and the work gets done right, or we come back under our written 90-Day Done Right Promise. That’s the whole deal.
For Las Vegas, that means showing up in the window we promised and knowing what we’re walking into. Our technicians have up to 25 years of experience, and we’re certified to service nine major gate brands, including DoorKing, LiftMaster, Elite, and Mighty Mule. We fix gates on site with welding and real repair work instead of pushing a replacement your gate probably doesn’t need.
We know the valley. The shared CMU block walls common in HOA subdivisions from the 89108 corridor up through 89149 settle on their own schedule, and the 110°F summers bake finishes and stiffen pivot bushings. That local context is why we start at the block anchors, not the hinges. You can read more about the full scope of what we do on our Gate Repair page.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Las Vegas
Gate Realignment
This is the most common job we run in Las Vegas. When a gate sags or drags, realignment means correcting the gate leaf against the post and the wall together, then re-shimming and re-anchoring at the block. Adjusting only the hinges on a gate hung into settling block walls is a temporary fix. We do the full correction so it stays square.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. In older stucco tract homes and newer northwest builds alike, gates mount directly into block, so anchor failures and walled-in hinge points are common. We weld and reinforce on site, and we repair the panel in place rather than hauling it off.
Automatic Gate Repair
When the operator runs but the gate drags or reverses mid-travel, the problem is usually mechanical, not electrical. We check the drive wheel, the pivot bushings and the safety photocell alignment, then test the whole system before we leave. Our techs are certified on LiftMaster and DoorKing operators, among others, so we know what each system should feel like when it’s working right.
Electric Gate Repair
Electric and low-voltage access gates fail for reasons that vary with the season. Monsoon-season gusts and dust storms rack unsupported gate leaves and knock loop detectors and safety sensors out of alignment. We trace the fault at the gate, weld or realign the hardware, and confirm the safety edges and sensors re-test clean. We don’t guess at wiring; we diagnose it.
Trusted Brands We Service in Las Vegas
We’re certified to service nine major gate brands, and on Las Vegas jobs you’ll most often see DoorKing, LiftMaster, Elite, and Mighty Mule operators on residential driveways and gated entries. We don’t stock parts on a truck or claim to, but because we know these systems we can usually diagnose on the first visit and have the right part ordered and scheduled fast. If you want the full list, ask when you call.
Common Gate Repair Problems We See in Las Vegas Homes
- Sagging gates on settling block walls. In northwest valley subdivisions, gates lagged into shared CMU block settle out of plumb with the house slab within a few summers. Hinge adjustment alone won’t hold it; the block anchors need re-shimming.
- Hardened grease and baked finishes. Extreme dry heat and UV bake powder-coat and harden grease in pivot bushings and operator drive wheels. The gate jams or the operator strains, and the real fix is servicing the moving parts, not replacing the gate.
- Wind-racked gate leaves. Monsoon microbursts and dust-storm gusts rack unsupported cantilever and swing leaves on the west and northwest sides. Hardware bends, and loop detectors and safety photocells get knocked out of alignment.
- Anchor and latch misalignment. When the wall moves and the gate doesn’t, the latch stops meeting the strike cleanly. That’s an alignment job from the post out, and it’s why we check the anchors before the hardware.
See the difference
Before
After
Before
After
Before
AfterHow Las Vegas HOA and Gated-Community Rules Shape Gate Repair
Most Las Vegas residential gates sit on shared block walls inside HOA-governed subdivisions, and that changes the whole job. Before anyone changes gate style, height or finish, the HOA’s architectural review usually has to sign off, and a management company often wants the work coordinated around resident access and shared entry systems. So the first step isn’t a wrench, it’s a conversation about approval and a plan that keeps the entry working while the repair is underway.
Here’s how a typical job usually goes. A homeowner in a northwest valley HOA subdivision calls because their ornamental steel swing gate drags on the concrete and won’t latch, and they figure the hinges wore out. The real cause is usually the block wall settling away from the house slab, combined with the heat baking the pivot bushings and UV drying out the operator’s drive wheel. A qualified pro re-shims and re-anchors at the block, corrects the sag at the hinge post, realigns the gate leaf, and re-tests the operator’s safety photocell before calling it done. The HOA reality is that this is as much an anchor-and-alignment job as a gate job, and that’s the part generic pages skip. We serve Las Vegas with that reality front and center.

Pricing for Gate Repair in Las Vegas, NV
Here’s what gate work actually runs in this market, so you’re not guessing. A hinge and post repair in Las Vegas typically runs $150 – $350 depending on how far the anchors have moved. Gate realignment usually lands $200 – $450, since it means re-shimming at the block, not just turning a bolt. Automatic gate repair (operator, drive wheel, photocell) runs about $180 – $400 in parts and labor. Electric gate diagnostics and repair generally falls in the $150 – $500 range, and weld and rust repair on ornamental steel runs $125 – $400.
Prices are quoted and agreed before any work starts, and the estimate doesn’t change at the door. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call for a free estimate.
In short: most jobs fit one of those ranges. If yours doesn’t, you’ll know why before we start.
We Also Serve Cities Near Las Vegas
We work gates throughout the Las Vegas valley, including Winchester, North Las Vegas, Sunrise Manor, and Paradise. Same crew, same written promise, same live person on the phone. Our Gate Repair in Las Vegas page covers the neighborhood details, and we’re happy to talk through which side of the valley you’re on when you call.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Las Vegas
It means submitting your gate plans to the HOA’s architectural review before any work begins. In Las Vegas HOA subdivisions, that usually covers gate style, height and finish so it matches the community standard. We can talk through the repair options and help you frame the request, then schedule once approval is in hand. Call for a free estimate.
Because the hinges usually are fine; the block wall is the problem. Gates lagged into shared CMU block settle on a different schedule than the house slab, so the gate goes out of plumb even with good hardware. The fix is re-shimming and re-anchoring at the block, not replacing the hinges. Call for a free estimate.
That’s usually a mechanical drag tripping the safety photocell, not a dead operator. Baked pivot bushings, a worn drive wheel, or a gate leaf out of alignment make the operator work harder, and the safety reverses. We realign the leaf and re-test the photocell so it opens and closes clean. Call for a free estimate.
Usually, yes. If your gate is on a shared entry or common wall, the management company often wants the work scheduled around resident access and shared entry systems. We can plan the repair so the entry keeps working during the job. Call to set it up.
Yes, especially on the west and northwest sides of the valley. Monsoon microbursts and dust-storm gusts rack unsupported cantilever and swing leaves, bending hardware and knocking loop detectors and safety photocells out of alignment. A gate that’s solid before the season often needs realignment after it. Call for a free estimate.
Gate dragging, not latching, or the operator acting up? Call (888) 292-7536 for a free estimate. A live person answers around the clock, we quote the price before we start, and every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right.
Written by the team at Gatewood Fence & Gate Paradise.