Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Las Vegas
If you’re pricing a new gate in Las Vegas, the honest answer up front: a driveway gate install here usually runs $2,800 to $7,500 for a typical residential setup, and it starts with a free on-site measure and a written price. We’re Gatewood Fence & Gate Paradise, and we’ve spent years working the gates on this valley’s block walls and stucco tract homes, from 89108 to 89149. We know what the sun does to a powder-coat finish and what a monsoon gust does to a gate leaf that was hung a little too proud. Call us at (888) 292-7536 and a live person picks up, day or night. Installation is measured, ordered and scheduled – we’ll tell you the real timeline instead of promising it by Friday.

Key Takeaways
- Most Las Vegas gate installations are measured, quoted in writing, then scheduled – this is planned work, not same-day repair.
- Older gates on shared CMU block walls often need re-shimming at the anchors, not a brand-new gate.
- We can retrofitted control boards, add working photo-eyes and edge sensors, and correct out-of-plumb leaves before we recommend replacement.
- Every installation carries the 90-Day Done Right Promise in writing. Free second opinion on any written estimate you’ve already got.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Why Gatewood Fence & Gate Paradise Is Las Vegas’s Preferred Gate Installation Company
People in Las Vegas come to us because the name is on the shop and the shop is down the road – that’s the oldest accountability there is. We’re locally owned and owner-operated, with a published address and license number anyone can look up, and calls are answered by a live person 24 hours a day rather than a voicemail or a queue three states away. When you’ve already been burned by a national outfit that quoted one price on the phone and charged another at the door, a company you can drive to and look in the eye matters more than a glossy brochure.
We repair what other companies want to replace. That’s the whole philosophy, and it shows up on aging gates all over the valley. On a typical job, we’ll walk the gate with you, show you where it’s failing, and tell you plainly whether a retrofit gets you another ten summers or whether replacement is the cheaper answer over the long run. Fix the panel without the post and you’ll fix it twice – so we start at the hinge post and the block anchors, every time.
Our technicians have up to 25 years of experience, and the person who measures your gate is the person who comes back to set it. Standing offers are simple and don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Our Gate Installation Services in Las Vegas
Whether you’re in a newer northwest build or an older pocket of 89108, the gate has to survive the same desert. Here’s how we approach the main install types across Las Vegas.
Driveway Gate Installation
A driveway gate in Las Vegas carries real load – it’s the one that has to swing or slide true through 110°F+ summers and still line up when the monsoon gusts hit. We measure the opening, check how the block wall has settled relative to the house slab, and set the posts so the gate hangs square to the anchors, not just to the fence line. If you want an operator, we’ll plan for it from the start so the power run and the safety edges are part of the job, not an afterthought bolted on later.

Swing Gate Installation
Swing gates are the most common failure point we see, because a swing gate sags in the hinge post, not in the middle – and that’s where we start. In HOA-governed subdivisions, the gate is usually mounted into a shared CMU block wall that settles on a different schedule than the house, so we shim and anchor with that in mind. We’ll build the leaf, hang it, and test it closing on its own before we call it done.

Sliding Gate Installation
A slide gate that drags is usually telling you about the ground it runs on – hardened grease in the pivot bushings, a dried-out drive wheel on the rack and pinion, or a track that’s lifted over a settled slab. When we install a new sliding gate in Las Vegas, we set the track and the posts to handle heat expansion and the valley’s dust, so the leaf doesn’t bind a few summers in. See our full Gate Installation service for how we plan the whole job.

Pedestrian Gate Installation
Pedestrian gates on 6-foot block-wall side yards are where the small stuff bites – a hinge that dries out, a latch that won’t catch once the block wall shifts. We set the posts deep enough and hang the leaf so it self-closes cleanly and stays put. It’s a short job when it’s done right the first time.
Trusted Brands We Service in Las Vegas
When a new automatic driveway gate goes in, the operator matters as much as the leaf. We install and service the major brands – LiftMaster, DoorKing, Elite and Mighty Mule among them – and we’ll match the operator to the gate and the access you actually want, not the one that’s on sale. We don’t claim to stock parts on a truck; we order what the job needs and tell you the real lead time up front. Older operators with obsolete control boards are where we spend a lot of time in Las Vegas, because a board that predates modern safety requirements can leave an aging automatic gate without working photo-eyes or edge sensors. That’s a safety question, not a convenience one, and we treat it that way.
Common Gate Installation Problems We See in Las Vegas Homes
The valley doesn’t fight gates with rain or rust the way people assume. It fights them with sun and wind, and with block walls that move.

- Hinge posts settling into shared CMU block. In the northwest valley, gates are hung on block walls that settle on a different schedule than the house slab, so a gate that was perfectly square at install goes out of plumb within a few summers. The fix is re-shimming at the block anchors, not just tightening hinges.
- UV and dry heat baking finishes and warping leaves. Powder-coat and wood both take a beating under a Las Vegas summer, and steel and wood leaves warp and expand until they drag. Hardened grease and dried-out pivot bushings do the rest.
- Obsolete control boards on legacy operators. Older automatic gates across the valley run on boards that are long out of production and often lack working entrapment protection. That’s a genuine hazard, and it needs a trained pro – not a weekend fix.
- Monsoon microbursts racking gate leaves. A gust that catches an unsupported or misaligned leaf bends it out of true, and a swing or cantilever gate that was fine in spring starts jamming by August.
On a typical job, a homeowner in an HOA-governed stucco tract subdivision calls about a driveway swing gate that’s dragging and jamming. The pro usually finds the fault at the hinge post – a pulled wall anchor or a leaf racked out of plumb by years of heat cycling and monsoon gusts – and re-shims at the block anchors before returning the gate to service. If a slide gate sticks, the same tech checks the bushings, the drive wheel, and whether the operator’s safety photocell still functions.
This is also the one thing that only applies around here: the destroyer in Las Vegas is UV and wind on shared block walls, not rain and rust. That single fact changes how we diagnose an aging gate from top to bottom.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Las Vegas, NV
Here’s what installation work actually runs in this market, so you can budget before you call. The price is quoted and agreed before any work starts – you’ll never see an invoice bigger than the number on the estimate.
- Pedestrian gate install, standard 4- to 5-foot steel or ornamental: $650 to $1,400
- Swing driveway gate, single leaf, hung into block: $1,800 to $3,600
- Double swing driveway gate: $3,200 to $6,800
- Sliding gate install with track and posts: $2,800 to $6,500
- Gate operator and access control add-on: $1,500 to $4,200 depending on power run and safety edges
What drives the range is the block-wall condition, the size and material of the leaf, whether you want an operator, and how far the power run has to travel. Retrofitting an aging gate is usually far cheaper than a full replacement – a control board, fresh photo-eyes, and block-anchor re-shimming can run $400 to $1,800 versus $2,800 and up for a new install. Estimates are free, and if you’ve got a written estimate in hand, we’ll give you a free second opinion on it.
We Also Serve Cities Near Las Vegas
Gate installation isn’t confined to the city line. We also work the communities around Las Vegas – Winchester, North Las Vegas, Sunrise Manor and Paradise – and the same sun, wind and block-wall settlement follow us out there. You can see our full coverage for Gate Installation in Las Vegas and the surrounding valley.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Las Vegas
An obsolete control board can be retrofitted in most cases, and it’s usually far cheaper than a new installation. We can swap in a current control board on many legacy operators and add working photo-eyes and edge sensors so the gate meets modern entrapment protection. What we won’t do is swap a board into a gate leaf that’s already racked out of plumb, because you’d be putting good electronics on a bad gate. We’ll inspect the whole setup, tell you plainly which is the cheaper answer over the long run, and quote it in writing before anything moves. Call (888) 292-7536 for a free second opinion on any written estimate.
Because tightening hinges treats the symptom, not the cause – the gate’s going out of plumb at the block anchors, and the hinge adjustment won’t hold. In the northwest valley, gates are hung on shared CMU block walls that settle on a different schedule than the house slab, so the wall moves and the gate follows. The fix is re-shimming at the block anchors and re-hanging the leaf true to the post. A trained pro can tell within minutes whether that’s the problem or whether the post itself has failed. Call us and we’ll come out and show you.
The post, about nine times out of ten. A gate sags in the hinge post, not in the middle. Years of 110°F+ heat cycling and monsoon gusts pull at the block anchors, and once the post is off, the leaf hangs off-plumb no matter how square the panel is. Fix the panel without the post and you’ll fix it twice. We check the block anchors first and work out from there.
Usually it’s something simpler – hardened grease in the pivot bushings, a dried-out drive wheel on the rack and pinion, or a track that’s lifted over a settled slab. All of that can be corrected without a new operator. We look at the hardware and the ground the gate runs on before we talk about motors. If the operator really has failed, we’ll tell you – and we’ll quote the replacement in writing before any work starts.
Every automatic driveway gate should have working entrapment protection: functioning photo-eyes that stop and reverse the leaf when something crosses the beam, and edge sensors on the moving gate itself. On older Las Vegas gates, the most common problem is a board that predates modern requirements and photo-eyes that quit years ago. That’s a genuine entrapment hazard, especially with kids and pets, and it’s not a weekend project – it needs a trained pro to test the circuits properly and get them working again. Call us and we’ll check yours.
Get a Free Estimate on Your Las Vegas Gate
If you’ve got an older gate that’s dragging, or you’re planning a new install on your block wall, the next step is simple. Call Gatewood Fence & Gate Paradise at (888) 292-7536 for a free on-site measure and a written price. We’ll show you what can be salvaged on the gate you’ve already got – retrofit the control board, add the safety gear, re-shim the block anchors – and tell you straight when replacement is the cheaper answer. We work Las Vegas and the surrounding valley, and every job carries the 90-Day Done Right Promise in writing. A live person answers the phone, day or night.
Written by the team at Gatewood Fence & Gate.