A Gatewood company - serving Paradise, NV
Gatewood Fence & Gate Paradise gate repair team

Gate Motor & Opener Cost in Paradise - Honest Price Ranges, Free Written Quote

Real local price ranges for the work, then a free site survey and a written quote for your driveway. Groundworks, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Motor & Opener Cost in Paradise?

Gate motor and opener work in Paradise typically runs $280 to $850 for a repair and $650 to $2,400 for a full motor or opener replacement with installation, depending on the gate type, motor brand, and whether your operator needs a new power run or just a swap. A simple arm-replacement on a swing gate usually lands near the low end; a sliding gate with a new LiftMaster or FAAC operator, new safety sensors, and a fresh concrete pad sits at the top. We give you the number up front, and it doesn’t change when we pull into your driveway.

That’s the short answer. The longer one depends on what’s actually wrong with your gate. A motor that won’t open isn’t always a motor problem. Sometimes it’s a sagging hinge post dragging the gate off the track, sometimes it’s a limit switch, sometimes it’s a control board that cooked itself in a July afternoon. We figure out which one before we quote a part. Show me the gate closing on its own and I’ll show you where it’s failing. If you want the full rundown of what we service, our Gate Motor & Opener in Paradise page covers the brands and the common failures we see.

Gate Motor & Opener Cost Breakdown (2026)

Here’s what the work actually costs in the Paradise market this year. These are real ranges, not phone-quote teasers. The number you hear on the phone is the number on the invoice.

Line item Typical price range
Service call / diagnostic (waived with repair inside the county) $0 (no trip charge)
Swing gate arm operator replacement (Ghost Controls, Mighty Mule, Viking) $280 – $620 installed
Sliding gate motor replacement (FAAC, BFT, LiftMaster) $750 – $1,850 installed
Heavy-duty / commercial sliding operator (DoorKing, Elite) $1,400 – $2,400 installed
Control board replacement $180 – $420 parts + labor
Safety sensor / photo-eye pair (required by code on most installs) $95 – $240
Battery backup install $130 – $320
New low-voltage power run (up to 100 ft) $250 – $680
Concrete pad or post mount for a new operator $300 – $900
Keypad / remote / access control add-on $120 – $450
On-site welding repair (stripped hinge, cracked frame, bent track) $120 – $400

What pushes the number up: gate weight and width, whether the operator has to be swapped for a different model because the old one’s discontinued, and whether the power run has to be redone. What pulls it down: keeping the existing operator and fixing the actual failure instead of replacing it. That last one matters. We’re set up to weld on site and to repair what other shops want to replace, so if your gate has a bad hinge post and a perfectly good motor, you’re not paying for a motor you don’t need.

What Affects Gate Motor & Opener Pricing in Paradise

Paradise is a suburb tucked against the airport and the Strip, and the gate work here has its own flavor. A few things move the price:

  • Whether it’s a swing or sliding gate. Swing gate arms run lighter and cheaper to replace. Sliding gate operators carry more motor, a rack-and-pinion drive, and more weight, so the parts and labor both climb. If your gate rolls on a track, expect a higher number than a driveway arm.
  • Sandy soil and settling posts. The ground around Paradise does what desert ground does – it shifts. When a hinge post settles, the gate drops and drags, and the motor works harder until it quits. Sometimes the fix is the post, not the operator, and that’s a completely different line on the invoice. Fix the panel without the post and you’ll fix it twice.
  • Summer heat on control boards and batteries. A metal gate in July in Paradise can hit 150 degrees in the sun. Control boards cook, and sealed lead-acid batteries in operators fail early here – often in two or three years instead of the five they’d last somewhere cooler. A battery backup install is cheap insurance.
  • Whether the operator has to be swapped for a different model. If your old operator is discontinued and the gate can’t take a direct replacement, you’re looking at some rework of the mount and wiring. That adds a few hundred dollars.
  • Access control and remotes. A new keypad, a phone-connected opener, or a fresh set of remotes adds $120 to $450 depending on how many doors and how complex the setup.
  • Permits and safety sensors. Most motorized gate installs here need a photo-eye pair and a working auto-reverse, and some setups require a permit. We’ll tell you what your specific gate needs before we quote the job.

How to Save on Gate Motor & Opener

There’s no reason to overpay for a gate repair. Here’s how to keep the number down.

  • Get the diagnosis before the parts. A $95 to $240 safety sensor pair is a lot better than a $1,200 operator swap. If the gate reverses on its own or won’t latch, have us check the sensors and limits first.
  • Take the free second opinion. If another shop hands you a written estimate and it feels high, bring it to us. We’ll look at it at no charge and tell you honestly what we’d do. That’s a standing offer, not a special.
  • Use the standing discounts. $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. These aren’t haggling points – they’re on the sheet.
  • Fix the mount before you blame the motor. If your gate is dragging or sagging, a post repair with a weld on site ($120 to $400) is often the whole job, and you keep the operator you already have.
  • Ask for on-site welding. Hauling a gate to a shop means a truck, a wait, and a bigger bill. We weld in your driveway, so the gate stays where it belongs and you’re not paying to move it.

For a free estimate, call (888) 292-7536. A live person answers, day or night.

How a Gate Motor Repair Actually Works

Most people don’t need the full process – they need to know we’ll find the real problem. Here’s the order we work in, every time:

  1. Diagnose the failure. We check the operator’s power, the control board, the limits, and the safety sensors. We also test the gate by hand to see if it moves freely. That last check catches a lot of “dead motor” calls that are actually dragging gates.
  2. Check the post and hinge. A gate sags in the hinge post, not in the middle – and that is where we start. If the post is settling, we weld and reinforce on site.
  3. Quote the repair vs. the replace. We give you both numbers and tell you which one makes sense. If the operator is good and the problem is mechanical, we say so.
  4. Do the work. On-site welding, brand-matched parts, background-checked technicians. Same visit for most repairs.
  5. Test and walk through it. We run the gate in and out, check the reverse, test the remotes, and hand you the invoice with the 90-Day Done Right Promise stamped on it in writing.

If you want the detail on brands and specific failure modes, see our home page and the gate motor page linked up top. We’re certified to service nine major gate brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so there’s a good chance we already know your operator.

FAQs – Gate Motor & Opener Cost

Is it cheaper to repair or replace a gate motor in Paradise?

Repair is almost always cheaper when the operator itself is sound – a control board, sensor, or limit switch fix runs $180 to $420, compared with $750 to $1,850 for a full sliding motor replacement. Replace only when the motor is burned out, the model is discontinued with no direct swap, or it’s already failed twice. Call (888) 292-7536 and we’ll tell you which one you’re facing before you spend a dime – estimates are free.

How much does it cost to fix a gate that won’t open all the way?

That symptom is usually a limit switch, a sensor, or a dragging gate, and the fix typically runs $95 to $400. A sagging hinge post that’s dragging the gate off its track is a common cause here, and on-site welding for that runs $120 to $400. Call (888) 292-7536 for a free estimate – we diagnose the real cause before quoting a part.

Do I need a permit to install a gate opener in Paradise?

Most residential gate motor installs here need safety sensors and a working auto-reverse, and some setups require a permit depending on the gate and property line. We’ll tell you exactly what your gate needs before the quote. Call (888) 292-7536 and we’ll walk you through it.

How long do gate motor batteries last in Paradise heat?

Two to three years is typical here, shorter than in cooler climates because of the summer heat on sealed batteries. A battery backup install runs $130 to $320 and saves you the surprise of a dead gate in the middle of a August afternoon. Call (888) 292-7536 to schedule a check.

Can you fix my gate the same day?

Most repairs get same-day or next-day service in Paradise, and a live person answers the phone 24 hours a day. The common jobs – arm replacement, sensor pair, control board, welding – are usually done in a single visit. Call (888) 292-7536 for the soonest window.

What does the 90-Day Done Right Promise cover?

Every job comes with a written 90-day guarantee: if it’s not done right, one call brings us back to make it right, no runaround. That’s stamped on the invoice, not buried in fine print. Call (888) 292-7536 with any question about a repair.

Get a Straight Number on Your Gate

If your gate won’t open, opens partway, or sounds like it’s grinding, we’ll come look and tell you the real number – no upsell, no surprise at the door. We repair what other shops replace, we weld on site so the gate stays in your driveway, and we stand behind every job with the 90-Day Done Right Promise. Background-checked technicians, upfront pricing, and a live person on the line whenever you call. For a free estimate in Paradise, call (888) 292-7536.

Pricing reflects the Paradise market as of 2026. Gatewood Fence & Gate Paradise offers free estimates – call (888) 292-7536.

What Our Customers Say

★★★★★ 4.8 from 6+ reviews

"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."

- Otis Redmond

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

- Winston Achterberg

"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."

- Judith Stallworth
Need Gate Repair help in Paradise? Licensed & insured · 30-60 min response · free estimates
Call (888) 292-7536

Request a Free Estimate

Tell us what's going on in Paradise. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch