A Gatewood company - serving Paradise, NV

LiftMaster Keypad & Intercom Repair in Paradise, NV

LiftMaster operatorsLiftMaster operators
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

LiftMaster Keypad & Intercom Repair: The Paradise Owner’s Guide

Keypad and intercom repair on a LiftMaster system in Paradise usually runs $145 to $340 installed, depending on whether it’s an outdoor wired keypad, a wireless keypad, or a full intercom/video station. We’re an independent gate and access control shop, not affiliated with LiftMaster, and we handle these repairs throughout Paradise and the surrounding foothills. If you’re calling before noon, there’s a good chance we can be out the same day.

Call (888) 292-7536

Owners around Paradise tend to notice the problem the same way. The code that worked in June stops working in August. The intercom crackles and you can’t hear the delivery driver. Or the keypad buttons go stiff and unresponsive because it took a summer of 110-degree afternoons. Those aren’t signs the whole system is dead. They’re signs one part has failed, and that part is usually repairable or swappable without touching the opener or the gate itself.

Which LiftMaster Models This Applies To

LiftMaster keypads and intercoms show up on a wide range of residential and light-commercial gate operators. On the residential side, the most common keypad is the wireless KPW-250 and its predecessors, usually paired with a LiftMaster or Elite-series operator. The wired outdoor keypads (KP200, KP-8 series) get installed at the drive approach, often with a pedestal. Intercom and entry station work typically comes up on the LA400, LA500, CSL24U, and the older Estate Swing line paired with an entry panel. On the commercial gate side, you’ll see LiftMaster access control integrated into DoorKing and Linear setups, and we work on those as well – along with Mighty Mule and Ghost Controls on the lighter residential side.

Match the part before you buy anything. Open the keypad housing and look for the model label inside the cover. If the label is faded or missing, measure the footprint of the housing and match the wire count and voltage shown on the operator’s own label. That last step is where most DIY purchases go sideways.

OEM vs. aftermarket for LiftMaster is a real decision, not a marketing one. OEM gives you a guaranteed electrical match and the best odds of plug-and-play wiring. Quality aftermarket equivalents (Linear, Seco-Larm, and a few others) can save real money and are fine on many keypad swaps, but they require matching the code format and the voltage tolerances to your operator. The wrong cross-reference will leave you with a keypad that powers up but never opens the gate.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your LiftMaster Keypad & Intercom Repair Is Failing

  • Buttons go dead, then come back on cool mornings. This is heat fatigue on the membrane switches. Paradise summers are hard on keypad rubber, and the plastic softens and deforms over 5 to 8 years of full sun.
  • The code works for one person and not another. Memory chip or code-storage failure, not a code entry mistake. If a fresh code also fails for the same user, the memory or the user slot itself is the culprit.
  • The intercom crackles or the speaker cuts in and out. Usually a failing speaker driver or corroded wire at the station, especially where the wire ran through drip irrigation or a plant bed. Wind-blown grit in the housing speeds this up.
  • You can hear the visitor but they can’t hear you. Almost always the microphone element or a broken ground in the station wiring. The audio path is not the same as the data path, so a dead mic doesn’t mean the keypad is dead.
  • Random beeps or phantom button presses. Water intrusion into the housing after a monsoon storm, or a failing control board on the keypad itself. Either way, the fix is the part, not the operator.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

We price these repairs up front, quote number on the invoice, and that’s the number you pay. Here’s what owners in Paradise typically see:

Part Installed Price Notes
Wireless keypad (KPW-250 or equivalent) $145 – $195 Battery, programming, walk-test included
Wired outdoor keypad (KP200 / KP-8) $195 – $275 Wire inspection and seal-check included
Intercom / entry station repair $225 – $340 Speaker, mic, and station wiring diagnostics
Full intercom station replacement $275 – $425 Only if the station itself is beyond repair
Control board replacement (operator side) $260 – $480 Operator board, not keypad, when the fault lives upstream

What drives the range: pedestal condition, wire run length, whether the housing sits in full sun or shade, and whether the repair needs on-site welding to re-seat a bent pedestal or housing bracket. We weld in your driveway, not in a shop. Every keypad and intercom job carries a 90-Day Done Right Promise in writing, and there’s no trip charge inside the county.

DIY or Call Us?

There are a few safe checks an owner can do. Replace the batteries in a wireless keypad if it’s battery-powered. Wipe the face clean and check for visible water intrusion. Confirm the operator’s own LED indicator is on and steady. Those three checks solve a surprising share of keypad complaints.

Where DIY tends to go wrong: pulling the keypad housing off a wired station without killing power first. LiftMaster keypads on low-voltage wiring are not a shock hazard, but the operator side usually runs 24V AC or 12V DC through a transformer you don’t want to short out – it’ll take the whole operator control board with it. Intercom wiring also brings low-voltage and sometimes higher data lines that aren’t forgiving. Unless you’ve wired one of these before, it’s a repair worth handing off. Call (888) 292-7536 and we’ll talk through what’s happening before you commit to anything.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (888) 292-7536
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Gatewood Fence & Gate Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch