Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterWeld & Rust Repair in Paradise, NV
Weld and rust repair in Paradise usually runs $150 to $450 for a single gate, and most of that work can happen right in your driveway. If a hinge has torn loose, a post has rusted through at the ground line, or a gate frame is starting to flake and pit, we can weld it, treat the rust, and get the gate swinging straight again. Call (888) 292-7536 and a live person picks up, day or night.
Paradise sits in the desert, but that doesn’t mean gates here don’t rust. The sprinkler overspray, the occasional monsoon soak, and the mineral-heavy water in this valley do a number on steel over time. We’ve pulled gates out of yards near the Flamingo corridor and off quiet streets in Sunrise Manor that looked fine until you pushed on them and the bottom rail crumbled. On-site welding means the gate stays put. We don’t haul it off, and we don’t swap parts that don’t need swapping. For the full range of gate work we handle, see our Gate Repair in Paradise page.
Our technicians have up to 25 years of experience, and every weld-and-rust job comes with the 90-Day Done Right Promise in writing. If something we fixed comes loose or the rust comes back where we treated it, one call brings us back. No runaround.
When You Need Weld & Rust Repair
Some gate problems are obvious. Others sit quietly for a year until a hinge snaps and the gate drops. Here’s what we see most often when people call us in Paradise:
- A hinge has torn free of the post. The metal around the weld cracks and pulls away, and the gate sags at the corner. This is a weld repair, not a hinge replacement, and it’s the most common structural failure we fix.
- Rust along the bottom rail. Sprinklers hit the same spot on the same rail every morning. Eventually the steel thins, flakes, and starts to pit. Catch it early and we can grind it back and treat it before it eats through.
- Rust at the ground line on posts. The post meets wet soil and lawn runoff, and that’s where it goes first. In Paradise we see this a lot on older iron posts where the finish wore off years ago and nobody noticed.
- A gate frame that flexes or wobbles. A cracked weld somewhere in the frame lets the whole gate twist. Push on the top corner and watch the opposite bottom corner move – that’s your tell.
- Bubbling paint or rough patches. Paint lifts when rust grows underneath it. If you can run your hand along a rail and feel bumps, the metal is already working against you.
- Factory welds that never held up. Some gates ship with welds that look fine but fail within a couple of seasons. We’ve re-welded plenty of DoorKing and Elite gates where the original welds were thin from day one.
If any of those sound familiar, don’t wait for the gate to fall. A $150 weld today beats a $600 replacement post next spring.
Our Weld & Rust Repair Process
Here’s how a weld and rust job goes from the first call to the final swing. Every step happens with the gate still mounted, unless a post is so far gone it genuinely has to come out.
- We look at it before we quote it. The person who shows up inspects the gate in person: hinge posts, frame welds, bottom rails, ground-line rust, and the latch side. You get a written, upfront price before any work starts. No surprises at the door.
- We grind the rust back to bare metal. You can’t weld over rust and expect it to hold. We take the affected area down to clean steel so the new weld actually bonds. This is the step that decides whether a repair lasts a season or a decade.
- We weld on site. Cracks and torn hinges get welded right where the gate hangs. We re-weld the joint and, where it needs it, add a gusset or plate so the repair is stronger than the original. That’s the difference between fixing a gate and fixing it twice.
- We treat the rust before it comes back. Bare metal gets a rust-inhibiting primer, then finish paint to match. Skipping this step is how rust wins. We don’t skip it.
- We test the swing and the latch. The gate gets opened and closed by hand. Hinges are checked, the latch is checked, and if the gate has an opener we confirm it still runs its full cycle. Show me the gate closing on its own and I’ll show you where it’s failing – so we watch it close before we leave.
- We put the promise in writing. The 90-Day Done Right Promise goes on the invoice. If the weld or the rust treatment fails, you call and we come back.
For gates with opener problems on top of the rust, see our home page for the full list of what we handle.
Weld & Rust Repair Pricing in Paradise
Weld and rust repair in Paradise runs $150 to $450 for most single-gate jobs, and we give you the number before we start. What moves the price is how much rust there is, how many welds have failed, and whether a post needs to be replaced rather than repaired.
| Job | Typical range | What drives the price |
|---|---|---|
| Single hinge re-weld | $150 – $250 | How much metal tore out around the hinge |
| Multiple weld repairs on one gate | $250 – $400 | Number of failed joints, frame cracks |
| Rust treatment and repaint (rail or frame) | $200 – $450 | How far the rust has spread, finish matching |
| Rusted post replacement + re-weld | Quoted on site | Post depth, concrete, gate weight |
A few things keep the price down: calling before the rust eats through a rail, having the gate accessible, and knowing whether you want us to match existing paint or just protect the metal. A second gate on the same property usually costs less than the first, since we’re already set up.
Standing offers apply here: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. No haggling. Call (888) 292-7536 for a free estimate.
FAQs – Weld & Rust Repair
How much does weld and rust repair cost in Paradise?
Most weld and rust repair in Paradise costs $150 to $450, depending on how many welds have failed and how much rust needs treating. A single torn hinge is usually at the low end. Rust that’s spread across a frame or a bottom rail runs higher. Call (888) 292-7536 for an exact quote – estimates are free and the written price doesn’t change at the door.
Can you weld my gate on site, or does it have to come off?
We weld on site whenever the gate can stay mounted, which is most of the time. The gate stays in your driveway and you watch the work happen. That’s better for you and better for the gate, since we can test the swing and latch right there instead of guessing after a reinstall.
Is it cheaper to repair the rust or replace the gate?
Repair is almost always cheaper when the rust is on rails, hinges, or the lower frame and the post is still sound. Replacing makes sense when a post has rusted through below grade or the frame is thin across multiple sections. We’ll tell you which one you’re looking at, and we’re not going to sell you a new gate when a weld and a fresh coat of primer will do the job.
Will the rust come back after you fix it?
Not where we treat it, as long as the paint and primer stay intact. We grind to bare metal and apply a rust-inhibiting primer before finish paint, which is the part most quick fixes skip. And if a treated spot does come back within 90 days, the 90-Day Done Right Promise covers it – one call brings us back.
Get Your Gate Welded Right
If a hinge is pulling loose or rust is creeping up a rail, don’t wait for the gate to fail. We’ll come out, look at it in person, give you an honest written price, and weld it on site with the gate still hanging. We service LiftMaster, Mighty Mule, and the other major brands we’re certified on, and every job carries the 90-Day Done Right Promise in writing. Our technicians have up to 25 years of experience, and every weld is done by the person who shows up. Call (888) 292-7536 for a free estimate – a live person answers, day or night.
Written by the team at Gatewood Fence & Gate Paradise, serving Paradise.