Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Paradise, NV
Hinge and post repair in Paradise typically runs $150 to $450, and most of that work happens in your driveway the same day. When a gate droops, drags, or won’t latch, I start at the hinge post, not the gate. That single post carries the whole leaf, the opener’s pull, and every bit of wind off the valley. A gate sags in the hinge post, not in the middle – and that is where we start. Fix the panel without the post and you’ll fix it twice.
Gatewood Fence & Gate Paradise is locally owned and owner-operated. I will be there myself, or you can drive to the shop and look me in the eye. My name is on the shop, my address and license number are published, and the phone is answered by a live person 24/7, not a voicemail box. Whether the gate hangs wrong after a windstorm, a car rolled into the post, or a contractor left lopped-off anchor bolts and called it done, this page is the place to start. For the broader picture of everything we fix on a gate, see Gate Repair in Paradise, and for the full menu of what the shop handles, start at the home page.
Key Takeaways
- Hinge and post repair in Paradise usually costs $150 to $450, quoted upfront before any work starts.
- Most sagging gates fail at the hinge post or hinge connection, not in the middle of the panel.
- We weld and repair on site, so the gate stays in your driveway instead of going to a shop.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings me back.
- Seniors and veterans get a permanent 10% discount, and there’s no trip charge inside the county.
When You Need Hinge & Post Repair
Show me the gate closing on its own and I’ll show you where it’s failing. Most homeowners in Paradise call after they’ve already adjusted the thing twice and the gate still wants to swing or drag. Here’s what usually tips people off:
- The gate sags at the latch side. The free end has dropped an inch or more, and it takes a shoulder to push it closed. That’s a hinge post leaning or a hinge plate pulling out of the wood, usually on the gate’s opening side.
- Metal posts loosened in the ground. The desert ground here goes from baked-hard to saturated fast, and a post that wasn’t set deep enough or was set in soil that dried out will rock in the wind. Once it moves, the hinges take a beating and the gate gets sloppy.
- Mangled or cracked hinges. Bent hinge knuckles, snapped welds, or hinges that creak and grind every swing. On a driveway gate with a LiftMaster or Mighty Mule opener, a bad hinge also strains the operator and shortens its life.
- A car, lawn crew, or delivery truck backed into the post. The post takes the hit, the gate hangs crooked, and the latch and opener both quit lining up. This is one of the most common calls we get.
- Rotted wood at the gate-side post. Soft spots where the hinge bolts bite into the wood, bolts working loose, or screws turning in a stripped hole. You can see daylight where the hinge should be tight.
- A previous “repair” that didn’t hold. Hinges screwed into a split rail, a new panel hung on a tired post, or lag bolts that pulled out in a month. I get genuinely annoyed at sloppy work somebody left behind, and I’ll show you exactly what wasn’t done right.
Signs like these are worth a call before the gate quits entirely. A sagging gate that you fix when it’s small is a $150 job. The same gate after it’s fallen off the post, bent a hinge, and knocked the opener out of alignment is a different afternoon.
Our Hinge & Post Repair Process
Here’s how a hinge and post repair actually goes when I show up in Paradise. Upfront pricing first, no surprises at the door.
- Walk the gate and read the failure. I check the hinge post for lean, the hinges for wear, the anchor points for rust or stripped screws, and the opener for strain. I want to know whether the post is the problem, the hinge is the problem, or the gate panel itself has warped and is dragging on a post it never touched before.
- Give you an upfront price before I touch anything. I’ll tell you what I found, what it takes to fix it correctly, and what it costs. If there’s a cheaper honest option and a more thorough one, you’ll hear both. Free second opinion on any written estimate you’ve already got from someone else.
- Fix the post, then the hinge. A post that’s rocked loose gets re-set or replaced with a proper footing, and that’s the part most of the cheap quotes skip. Metal posts get anchor plates or weld repair. Wood posts get sound stock and solid fasteners. Only then do the hinges get replaced or rebuilt, because a hinge screwed back into a wobbling post will loosen again in weeks.
- Weld on site when the job calls for it. Bent steel hinges, cracked hinge barrels, and torn hinge plates get welded right there in your driveway. The gate stays home. No hauling it off for a week and no swapping parts that don’t need swapping.
- Realign the gate, latch, and opener. Once the post and hinges are solid, I set the gate so it swings level and the latch lines up. If there’s an opener on it, I check the arm and force settings so the operator isn’t fighting a crooked gate. On a DoorKing or Elite system, an out-of-line gate is often what wore out the operator in the first place.
- Test it with you watching and leave the promise in writing. You see it open, close, and latch before I leave. Every job carries the 90-Day Done Right Promise, stamped in writing. If it isn’t right, one call brings me back, no runaround.
Hinge & Post Repair Pricing in Paradise
Here are honest ranges for what this work runs around Paradise. Every quote is upfront and fixed before I start – no haggling, no surprise line items when I hand you the invoice.
| Job | Typical range |
|---|---|
| Replace or rebuild a worn hinge (per hinge) | $75 – $175 |
| Weld repair on a bent or cracked hinge | $125 – $250 |
| Realign a gate panel, latch, and swing | $100 – $200 |
| Re-set or re-anchor a loose hinge post | $200 – $450 |
| Replace a rotted wood hinge post | $250 – $550 |
| Replace a bent metal hinge post (steel, welded on site) | $300 – $650 |
What moves you up or down that range: whether the post needs a fresh footing, how many hinges are worn, whether the gate is wood or steel, and whether an opener is involved and needs realignment afterward. Driveway gates and double gates cost more than a small garden gate because there’s more to true up. Most of the time the post is sound and the fix is hinges and a realignment, which lands on the low end.
Standing offers that don’t require asking: $40 off any repair over $200, no trip charge anywhere inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. The estimate is free either way.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Paradise?
Hinge and post repair in Paradise usually runs $150 to $450, with post replacement on a driveway gate as the main thing that pushes it higher. Hinges alone or a realignment often land near $150 to $250. Call (888) 292-7536 for an exact quote – the estimate is free and the price is upfront.
Can you fix a sagging gate the same day?
Often, yes. Most hinge and post repairs are done in a single visit, and the gate stays in your driveway while we weld and true it up. If the post needs a fresh footing set in concrete, I’ll tell you that upfront and we’ll plan around the cure time. Call (888) 292-7536 and I’ll give you a straight answer on timing.
Is it cheaper to repair the hinge and post or replace the whole gate?
Repair almost always beats replacing the gate. A hinge and post repair runs a few hundred dollars, while a new gate and install costs far more, so I only recommend replacement when the frame itself has failed. Fix the post, replace the worn hinges, and the gate keeps its years of life. Call (888) 292-7536 and I’ll tell you honestly which one your gate needs.
Do you work on all gate brands, or just certain ones?
We service and repair the major gate and opener brands, including LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls. That means a hinge or post repair on one of those systems comes with someone who knows the hardware. Call (888) 292-7536 and tell me what’s on your gate.
Something You Can Count On
The name is on the shop, and the shop is down the road. That is the oldest accountability there is. I’ve been doing gate work since 2001, and the person who answers your call is a live person, not a machine – so if something feels wrong about your gate, don’t wait for it to fall. Reach out for a free estimate for hinge and post repair in Paradise, get an honest look at what’s failing, and an upfront price before any work starts. Up to 25 years of experience on the crew, on-site welding, and a 90-Day Done Right Promise in writing behind every repair. Call (888) 292-7536 and let’s get that gate swinging right.
Written by the team at Gatewood Fence & Gate Paradise, serving Paradise.