A Gatewood company - serving Paradise, NV

Automatic Gate Repair in Paradise, NV

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Automatic Gate Repair in Paradise, NV

Automatic gate repair in Paradise fixes the operator, the arm, the sensors, or the swing – not just the symptom. When a gate stops opening, drifts back closed, or beeps and refuses to budge, the cause is usually a failing motor, a misaligned safety loop, or a control board that took on desert grit. Gatewood Fence & Gate Paradise is locally owned and owner-operated, and we fix the gate that’s already on your posts. Call (888) 292-7536 and a live person picks up, day or night. You can read more about our full Gate Repair work if you want the bigger picture.

Paradise is hard on gate operators. Blowing sand gets into the tracks and gearboxes, summer heat bakes the control boxes, and the monsoon gusts that roll through the valley can knock a gate out of alignment just enough that the safety reverse trips. We see it across the 89119 and 89169 zips, in the older neighborhoods around the Convention Center and along the streets that feed into the airport corridor. A gate that’s been reliable for years can start acting up after one windy week, and that’s usually the operator complaining, not the gate itself.

We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means whether your operator is a DoorKing entrance system or a Mighty Mule swing gate, we’ve likely worked on one just like it down the road. Our technicians have up to 25 years of experience, and every automatic gate job carries our 90-Day Done Right Promise in writing.

Key Takeaways

  • Automatic gate repair fixes the operator, sensors, arm, and control board – not the fence line.
  • Most no-open and self-closing problems trace back to the motor or the safety sensors, not the gate frame.
  • We weld and repair on site whenever possible, so the gate stays on your posts.
  • Free estimates, $40 off any repair over $200, and no trip charge inside the county.
  • Live person answers (888) 292-7536 24/7 – no voicemail, no queue.

When You Need Automatic Gate Repair

Most calls start with one of these. If yours isn’t listed, call anyway – the symptom usually points to a familiar part.

  • The gate won’t open or close. The remote clicks, the keypad lights up, and nothing happens. That’s usually a dead operator, a tripped breaker at the control box, or a battery back-up that finally gave out after a hot Paradise summer.
  • The gate opens partway, then reverses. On a LiftMaster swing operator, this is often a safety sensor or photo-eye knocked out of line, or a limit switch that drifted. This is common around the neighborhoods near Sunset Park where windblown debris can block the beam.
  • The gate drags or rubs. A sag in the hinge post will bind the operator and make it work twice as hard. We check the post before we touch the motor, because fixing the operator while the gate still sags just means you’ll buy another operator soon.
  • The gate drifts closed on its own. A brake in the gearbox wears out on older operators, and gravity takes over. On sliding gates this is a real safety issue, not just an inconvenience – call us before someone gets caught in the slide path.
  • Access control stops recognizing cars. You drive up and the gate doesn’t sense you. Could be the loop detector, a failing proximity reader, or a DoorKing control board that took a lightning surge.
  • The keypad or intercom won’t work. Codes fail, phones ring to a dead box, or the intercom crackles. Older Elite and Linear systems sometimes just need a keypad swap – not a whole new operator.

If the gate’s still on the fence but the automated parts aren’t doing their job, this is the page for you. If the whole gate and fence need work, our team handles the broader job as well.

Our Automatic Gate Repair Process

We diagnose first, then quote, then fix. No surprises at the door. Here’s how an automatic gate repair call runs.

  1. We look at the whole gate, not just the box. The gate has to swing or slide freely by hand before any operator will work right. If the post is loose or the gate is dragging, that gets addressed before we touch the motor.
  2. We test the operator, sensors, and controls. Voltage at the board, limit switches, photo-eyes, loop detector, keypad, and any remote or access device. A quick cycle test with a meter on it tells us most of what we need to know.
  3. We give you an upfront price. Line-by-line, before we turn a wrench. If it’s a repair, you’ll see the repair price. If a part is failing and acting up, we tell you what it will cost to fix now versus wait – and yes, you get a free second opinion if you have a written estimate from somebody else.
  4. We repair on site when possible. Motors get swapped, control boards get replaced, sensors get realigned, and hinge posts get welded right in your driveway. We don’t haul gates off if the work can happen at your place.
  5. We test it with you standing there. Open, close, safety reverse, keypad, remote, and access code. If it’s not right, we keep working. If it’s right, you’ll see it work before we leave.
  6. You get the 90-Day Done Right Promise in writing. If something we fixed goes wrong, one call brings us back. No runaround, no “that’s a different problem” line.

Automatic Gate Repair Pricing in Paradise

Prices reflect what we actually charge in the valley – not a national call-center script. What you hear on the phone is what shows up on the invoice.

Repair Typical Range
Diagnostic / service call (waived with repair inside the county) $0 trip charge in-county
Photo-eye / safety sensor realign or replace $95 – $220
Remote or keypad replacement and reprogram $85 – $200
Limit switch adjustment or replacement $110 – $240
Control board replacement $280 – $650
Swing or slide operator motor replacement $450 – $1,200
Hinge post repair (weld-on site) $180 – $420
Loop detector / access control repair $250 – $550

What moves the number: the brand of your operator, whether the motor is still made, whether the post needs welding, and how far out you are. A LiftMaster residential swing arm is typically cheaper to repair than a commercial DoorKing entrance system, and a gate that needs a post weld costs more than one that just needs a photo-eye bump.

Standing offers that apply on every automatic gate repair: $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. No haggling, no “call today” pressure – just the price.

For more on our broader service menu, take a look at what else we handle locally – including Gate Repair in Paradise.

FAQs – Automatic Gate Repair

How much does automatic gate repair cost in Paradise, NV?

Most automatic gate repairs in Paradise run $95 to $450, with motor and control board replacements the higher end. A safety sensor or keypad fix is usually under $220. Control board or motor replacements push past $280, and a full operator swap can reach $1,200. We give you an upfront price before any work starts, and there’s no trip charge inside the county. Call (888) 292-7536 for an exact quote – estimates are free.

Can you come out today?

Usually, yes. A live person answers the phone 24/7, and we book same-day automatic gate repair in Paradise when the schedule allows – especially for gates stuck open, gates blocking access, or safety sensor failures. Call (888) 292-7536 and we’ll tell you the soonest window we can be there.

Is it cheaper to repair my automatic gate or replace the operator?

Repair is almost always cheaper when the operator’s mechanicals are still sound. A $150 limit switch or $220 photo-eye fix beats a $900 operator replacement every time. We replace the operator when the motor itself is failing, parts are no longer made, or the control board is gone. Even then, we check the gate, post, and rollers first – if those are wrong, a new operator would just fail the same way. Call (888) 292-7536 for a free estimate – we’ll tell you honestly which way it goes.

Do you repair all brands of automatic gate operators?

We’re certified to service nine major brands, including LiftMaster, DoorKing, Mighty Mule, Elite, FAAC, BFT, Linear, Viking, and Ghost Controls. That covers most of the automatic gates in Paradise and the surrounding valley neighborhoods. If your brand isn’t on the list, call (888) 292-7536 – we often can still help, and we’ll tell you straight if we can’t.

What is the 90-Day Done Right Promise?

It means if something we repaired fails within 90 days, we come back and make it right at no cost. It’s in writing on every automatic gate repair job, not buried in fine print. One call brings us back.

Call for a Free Estimate

Automatic gate repair in Paradise doesn’t need to be a mystery. We’ll show up in the window we promised, tell you what’s wrong, quote you upfront, and fix what needs fixing. The name is on the shop and the phone is answered by a real person around the clock.

Call (888) 292-7536 for a free estimate. Ask for the 90-Day Done Right Promise in writing – it’s on every job.

Written by the team at Gatewood Fence & Gate Paradise, serving Paradise.

Need Gate Repair help in Paradise? Licensed & insured · 30-60 min response · free estimates
Call (888) 292-7536
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Gatewood Fence & Gate Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch