A Gatewood company - serving Paradise, NV
Gate Parts & Welding in Paradise, NV | Gatewood Fence & Gate Paradise - Gatewood Fence & Gate Paradise

Gate Parts & Welding in Paradise - Made to Measure, Written Price

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Trusted Gate Parts & Welding for Paradise Homeowners

When a hinge gives out or a weld splits, the gate can drag, drop, or stop latching altogether. The fix usually lives in one worn part, not a whole new gate. Our technicians have up to 25 years of experience with the parts that fail most on desert gates, and we weld on site so your gate never leaves the driveway. We’re owner-operated, calls get answered by a live person around the clock, and same-day repair is often possible in Paradise when you call early. Reach us at (888) 292-7536.

Call (888) 292-7536

What Our Gate Parts & Welding Service Includes

Every repair starts with a straight look at what’s actually broken. Here’s what we handle most often in Paradise.

Hinge Replacement

Hinges do the heaviest lifting on any swing gate, and they’re the first thing to wear when the steel is older or the gate has been dragging. You’ll know they’re shot when the gate sags in the opening, scrapes the ground, or wobbles even after you tighten the bolts. We cut out the worn hinge, weld a new one square to the post, and check the swing before we leave. A gate sags in the hinge post, not in the middle, and that is where we start.

Hinge Replacement

Post Replacement

When a hinge post rusts through or loosens in the ground, no amount of hinge work will hold the gate straight. You need a new post when the gate leans, the gate won’t close flush, or you can see corrosion at the base where it meets concrete. We remove the old post, set the new one plumb, and weld or bolt the gate back to it. Fix the panel without the post and you’ll fix it twice.

Post Replacement

Rail Repair

Rails are the horizontal bars that carry the gate’s weight and keep the frame rigid. They crack at the welds, bow in the middle, or rust through from the inside after years of sun and irrigation runoff. We cut out the damaged section, weld in a new rail matched to the frame, and check the whole frame for stress the broken rail was hiding. Winter temperature swings in Paradise work rails hard, and a bowed rail usually means a rusted section underneath.

Rail Repair

Custom Welding

Sometimes the part isn’t on a shelf. Odd-size gates, decorative ironwork, driveway gates that need reinforcement, and brackets for a new opener are all jobs for custom welding done in place. We bring the welder to your gate, measure the opening, and build to fit. That keeps the gate hung and aligned instead of hauling it off for days.

Gate Rollers

Sliding gates ride on rollers, and when a roller seizes or flattens, the gate drags, jumps the track, or strains the opener motor. You’ll notice grinding as the gate moves, a bump in the track, or the gate drifting out of line with the post. We replace the rollers, true up the track, and test the full travel by hand before we run the motor.

Latch & Lock

A latch that won’t catch or a lock that sticks is a security problem, not just a nuisance. Alignment shifts after a post settles, a hinge wears, or the gate frame moves in heat, and the latch stops meeting the strike cleanly. We realign the gate, fit a new latch or lock, and confirm it catches every time from both sides before we call the job done.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (888) 292-7536

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Brands We Service for Gate Parts & Welding

We work on the equipment most Paradise properties already have. On DoorKing access systems, the mounting brackets and gate-frame hardware take the wear, and we know where those connections loosen over time. With LiftMaster operators, we look at the arm and chain hardware that pulls against the gate frame, since a bent bracket there throws off the whole swing. Mighty Mule and Elite gates turn up often on residential driveways, and we match hinge, roller, and latch hardware to what those frames actually need.

Every brand wears in its own way, and knowing the difference saves you from replacing parts that are still good. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether you have DoorKing or any other make, we can help you get it swinging right again.

Signs You Need Gate Parts & Welding Right Now

Some failures are obvious. Others start small and get expensive. Here’s what to watch for:

  • The gate sags or drags the ground. That usually points to worn hinges or a loosened hinge post. Left alone, the dragging gate grinds down the frame and strains the opener until both fail.
  • You see cracks or rust at the welds. A hairline crack spreads every time the gate opens and closes. Catching it with a quick weld repair is far cheaper than waiting for the frame to split.
  • The latch won’t catch or the lock sticks. A gate that won’t secure is a real security gap, and it usually means the gate has shifted out of alignment. We reset it and fit the hardware so it catches cleanly every time.
  • The gate is hard to open by hand. If it takes effort to swing, a hinge or roller is binding. That friction wears the opener motor and shortens its life, so it’s worth checking early.
  • The opener runs but the gate barely moves. That can be a stripped gear, a bad arm connection, or a roller that’s seized. It’s not always the motor, and a proper diagnosis saves you from replacing equipment that still works.

Our Gate Parts & Welding Process – Step by Step

  1. 1
    You call, a live person answers. Tell us what the gate is doing and what kind of gate you have. We ask enough questions to bring the right parts and tools on the first trip. No voicemail, no callback queue.
  2. 2
    We inspect and diagnose in person. We check the hinges, post, frame, rollers, and latch by hand, test the swing, and look at the welds for stress cracks. You get a clear answer on what failed and why.
  3. 3
    We walk you through the fix and the price. You see the worn part, hear what we recommend, and get an upfront price before any work starts. No surprises at the door.
  4. 4
    We weld and repair on site. The gate stays hung in your driveway while we replace hinges, cut and weld rails, reset posts, or fit new rollers and latches. On-site welding keeps your gate aligned the whole time.
  5. 5
    We test the gate and back the work in writing. We open and close the gate, check the latch, run the opener, and confirm it all works before we leave. Every job carries the 90-Day Done Right Promise stamped in writing. If it’s not right, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Parts & Welding Cost in Paradise?

Most gate parts and welding work in Paradise lands in a range you can plan for. A hinge replacement typically runs $150 – $350 depending on gate size and how much rust is in the post. Rail repair and hinge-post welding generally fall between $200 and $500, since the welding and realignment take more time. Roller and latch repairs are usually the smaller jobs, often $100 – $250. Custom welding is quoted by the job once we see the gate.

Price depends on the gate material, how much corrosion we find, whether a post needs resetting, and how accessible the gate is. You avoid overpaying by fixing the failed part before it damages the frame or the opener. Every estimate is free and upfront, and the price is quoted and agreed before any work starts. We also take $40 off any repair over $200.

Gate Parts & Welding Near Paradise – Our Service Area

We serve homeowners across the east valley and the surrounding towns. Besides Paradise, we regularly work in Winchester, Whitney, Spring Valley, Enterprise, Henderson, and Las Vegas, plus outlying areas like Boulder City and Sandy Valley. Response times vary by location and workload, so call early in the day for the best shot at same-day service. You can also learn more about what we do.

Serving Paradise, NV – Our Local Coverage Area

We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Gate Parts & Welding in Paradise

Schedule Your Gate Parts & Welding Service in Paradise Today

If your gate is sagging, dragging, or won’t latch, don’t wait for it to get worse. Call Gatewood Fence & Gate Paradise at (888) 292-7536 for a free, no-obligation estimate. A live person answers around the clock, the price is agreed before any work starts, and every job is backed by the 90-Day Done Right Promise. Let us fix the part that failed and keep your gate swinging right.

Written by the team at Gatewood Fence & Gate Paradise.

Why Paradise Chooses Gatewood Fence & Gate Paradise

We set the standard for gate parts & welding in Paradise.

30-60 Min Response

Fast dispatch across Paradise. Same-day and after-hours emergency service available.

Licensed & Insured

The local pro we connect you with is certified and meets all state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Paradise

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Paradise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Paradise Customers Say

Trusted by homeowners across Paradise and surrounding areas.

★★★★★

"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."

Otis Redmond
★★★★★

"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."

Winston Achterberg
★★★★★

"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."

Judith Stallworth

Ready for Gate Parts & Welding in Paradise?

Call now for a free estimate, or request one below. The local pro we connect you with is licensed and insured, and here with fast after-hours help in Paradise.

(888) 292-7536

Request a Free Estimate in Paradise

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch