A Gatewood company - serving Paradise, NV

Ghost Controls Hinge & Roller Replacement in Paradise, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Hinge & Roller Replacement: The Paradise Owner’s Guide

We install Ghost Controls-compatible hinge and roller replacements in Paradise, and most swaps run $140 to $320 per gate installed, depending on the model and how many rollers are worn. Small jobs are often handled same-day when the part is on hand; the truth is we don’t keep a warehouse of parts, so we confirm the exact match first and give you a scheduled window. Upfront price quoted and agreed before any work starts. The local pros we connect you with are licensed and insured as Nevada requires, and calls get answered by a live person day or night.

Call (888) 292-7536

Owners usually find this part has failed the same way: the gate starts dragging on one end, the swing gets stiff, and suddenly the opener runs but the gate barely moves. In Paradise, that first show-up is often after a hot stretch when the rollers have dried out and the hinge pins have worked loose.

Worth saying up front: Gatewood Fence & Gate Paradise is an independent service provider and is not affiliated with Ghost Controls.

Which Ghost Controls Models This Applies To

Ghost Controls builds its residential openers around a fairly consistent hinge and roller layout, but “fairly consistent” is doing a lot of work in that sentence. The single-operator lines and the heavier dual-gate kits use hinge plates and roller trucks that look almost identical at a glance. Get the part wrong and the gate will bind in a way that feels like a motor problem.

The compatible hardware runs on the standard residential gate sizes you see across Paradise, generally gates in the 4-foot to 6-foot height range and up to roughly 12 feet wide per leaf on the lighter kits. Before we order anything, we identify the model from the label on the control box or the operator arm, then measure the gate leaf and check the hinge post spacing. Those two numbers settle the match faster than any catalog lookup.

The OEM-versus-aftermarket call for Ghost Controls is usually straightforward. A quality aftermarket hinge or roller truck that matches your bolt pattern and load rating does the job. What matters most is the pin diameter and the plate thickness – a thin plate will wallow out at the bolts in a season or two on a gate this heavy.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Ghost Controls Hinge & Roller Replacement Is Failing

Hinges and rollers wear slowly, so the symptoms creep up and owners often blame the motor. Here is what actually points to the hardware:

  • The gate sags at the hinge post instead of the middle. That tells you the hinge plates or pins have worn, not that the frame bent. A sag in the middle is a different repair.
  • The gate drags or scrapes along the ground on one end. Worn rollers lose their round profile and the leaf drops. That scraping is the roller, not a leveling problem.
  • The swing feels stiff or grinds when you push it by hand. Dry or seized hinge pins. In Paradise’s dry heat, grease cooks off faster than owners expect and the pin runs metal-on-metal.
  • The opener strains, reverses, or stops partway. This is a classic case of the motor working against binding hardware. Fixing the hinge and roller often solves what looks like an opener fault.
  • Visible play or wobble at the hinge. Grab the gate and rock it. Movement at the hinge pin means the pin or the plate hole has opened up, and it will only get worse.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a Ghost Controls hinge and roller replacement in Paradise, expect roughly $140 to $320 per gate installed. The low end covers a simple roller swap on a single gate. The high end covers a full hinge and roller replacement with welding touch-up, which is where on-site welding matters – we fix it in your driveway rather than hauling the gate off.

  • Parts: hinge plates, pins, and roller trucks matched to your model – usually $40 to $140 depending on how many are replaced.
  • Labor: removal, alignment, and refit – roughly $80 to $160 per gate.
  • Welding touch-up where the hinge post needs reinforcement – quoted as part of the job, never tagged on after.

What drives the range is the number of worn pieces and whether the hinge post needs welding. It’s a repair-first shop, so we replace what’s actually failing. Every job carries the 90-Day Done Right Promise in writing – one call brings us back if something isn’t right.

DIY or Call Us?

Some of this you can check safely, and some of it you can’t. Checking is fine: push the gate by hand and feel for grinding, rock it at the hinge, look for roller wear, and read the model label off the control box. That’s all safe and it helps us quote faster.

Where DIY goes wrong on this part is the install. Hinge and roller replacement means unbolting hardware that holds a heavy gate leaf while it’s under load, and a gate that comes off the post can pin a hand or drop on a foot. We’ve seen well-meaning swaps that left the gate misaligned and the opener fighting it. The other pitfall is picking a hinge that looks close but has the wrong pin diameter, which wallows out the post and creates a bigger repair. Calls get answered by a live person, and the estimate is free.

FAQs

How long should Ghost Controls hinges and rollers last in Paradise? Plan on roughly three to seven years for rollers and five to ten for hinges, shorter in Paradise because the dry heat and dust wear grease off fast. Greasing the pins a couple times a year is the cheapest way to stretch that lifespan.

Can a worn hinge or roller be repaired instead of replaced? Sometimes yes. A stiff pin can often be cleaned and re-greased, and a slightly worn roller truck can be adjusted. Once the pin hole has opened up or the roller has gone out of round, replacement is the honest answer, and we’ll tell you which one you’re looking at.

How long does the hinge and roller swap take? A single gate with a straightforward roller and hinge replacement is usually a one- to two-hour job once the right part is in hand. If welding is needed at the hinge post, add time. We confirm the part match before scheduling so you aren’t waiting on a wrong order.

How do you source the part? We match the part to your Ghost Controls model and gate measurements, then order it – we don’t claim to carry stock. For a fast quote, have your model number and gate dimensions ready.

Also service LiftMaster, Mighty Mule, and DoorKing hardware if your gate setup includes those.

If your gate is dragging, grinding, or making the opener work too hard, call us at (888) 292-7536 for a free estimate. We’ll come out, confirm the part, and quote your price before any work starts.

Written by the team at Gatewood Fence & Gate Paradise, serving Paradise and nearby areas.

Need Gate Repair help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (888) 292-7536
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Gatewood Fence & Gate Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch