Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Parts & Welding in Paradise: What to Know First
We provide independent Ghost Controls gate parts and welding in Paradise, and most swing-gate repairs are finished in a single visit once we’ve seen the gate. We’re an independent Ghost Controls service provider, not affiliated with or authorized by the manufacturer, so we repair the hardware and structure honestly rather than pushing a replacement. You get a written price before any work begins, and it doesn’t change at the door.
This page is for Paradise homeowners running a Ghost Controls opener on a driveway or side-yard swing gate who’ve hit a sag, a sticking latch, a bent rail, or a motor that strains and shuts off. Hal Gatewood has been at this since 2001, and our technicians have up to 25 years of experience on gates exactly like yours. A live person answers the phone around the clock. Call (888) 292-7536 and describe what the gate is doing.
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls makes affordable do-it-yourself swing-gate operators, and their failure patterns are different from the big commercial brands. The operator itself usually isn’t the problem – the gate frame, hinges, and posts it’s bolted to are. Here’s what we see in Paradise and how we handle each.
- Sagging gate arms straining the operator. The Ghost Controls Heavy-Duty and Light-Duty dual-gate kits (the HDB and HDK lines) push a gate that’s already dropped at the hinge. The motor fights the sag, heats up, and shuts off mid-travel. The fix isn’t a new operator – it’s hinge and post work, on site, so the gate swings free again and the arm does half the work. We weld the hinge back true wherever the post allows it.
- Hinge post rot that looks like an opener problem. In Paradise’s dry heat and caliche-heavy soil, a steel hinge post can rust from the inside while the gate looks fine from the street. Homeowners call us swearing the Ghost Controls unit is dead; it’s the post. We dig, set, and weld a new post, then re-mount the brackets square – a repair you can watch happen in your own driveway.
- Bent rails and twisted frames from clipping the gate. A vehicle clip throws the rail out of line, and the Ghost Controls arm then binds because the gate no longer travels flat. We straighten and weld the rail on site rather than hauling it off. Leave a twisted frame on a DIY operator kit and it’ll eat the gearbox within a season.
- Latch and lock misalignment tripping the auto-close. Ghost Controls auto-close kits and their wireless keypads depend on the gate landing in the latch cleanly. Wind, settling, and a slightly bent strike leave the latch half-caught. We align the latch, weld the strike if it’s loose, and re-test the whole cycle.
- Roller and track wear on sliding conversions. Some Paradise gates start life sliding and get converted to swing, or use Ghost Controls hardware alongside an older slide. Seized rollers and worn track brackets cause drag the operator reads as an obstruction. We replace rollers and re-weld brackets so the gate rolls free.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Parts & Welding Process
- 1
The call. A live person answers. We ask what the gate is doing – shuts off mid-swing, drags, won’t latch – and get the model if you have it. No voicemail, no queue.
- 2
Diagnose on site. We check the hinge post, the frame, and the rollers before we ever blame the operator. The gate tells us where it’s failing. Show us the gate closing on its own and we’ll show you why.
- 3
The parts decision. On Ghost Controls jobs we’re upfront about OEM versus quality aftermarket. Some replacement arms and brackets are OEM; some aftermarket parts fit and last and cost less. We tell you which is which and why, and we keep the repair warranty-safe so we don’t void a coverage you’re counting on.
- 4
The repair and weld. We weld hinges, rails, posts, and brackets in your driveway. Fixing the panel without the post means fixing it twice, so we do both while we’re there.
- 5
The test. Full open-and-close cycles, latch engagement, safety reverse, and auto-close timing. If it doesn’t pass, the job isn’t done.
- 6
Cleanup and the promise. We haul off the scrap and leave the driveway clean. Every job carries the 90-Day Done Right Promise in writing – if it’s not right, one call brings us back, no runaround.
See the difference
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Parts & Welding Costs in Paradise
Typical Ghost Controls swing-gate repairs in Paradise run $200 to $600 depending on what’s actually wrong. A hinge and latch realignment with welding is usually toward the low end; a new hinge post, rail repair, and bracket re-mount pushes higher. These are ranges – your exact price is quoted and agreed before we touch the gate.
- Hinge replacement or re-weld: $175 – $350 per hinge, on site.
- Post replacement (dig, set, weld): $400 – $900 depending on post depth and access.
- Rail repair / frame straightening with welding: $150 – $450.
- Gate rollers and brackets: $120 – $300.
- Latch and lock alignment: $95 – $225.
What moves the price: post condition, gate weight, and whether the frame needs welding versus a straight hardware swap. Standing offers apply – $40 off any repair over $200, no trip charge inside the county, and a permanent 10% senior and veteran discount. Estimates are free, and so is a second opinion on any written estimate you’ve already got.
Why Paradise Homeowners Call Gatewood Fence & Gate Paradise for Ghost Controls Work
Ghost Controls is one of nine brands we’re certified to service, alongside LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite. That matters on a Ghost Controls job because the operator rarely fails alone – the gate structure does, and we’re a welding and repair shop first. The name is on the shop and the address is published; you can drive over and look us in the eye. Hal and the crew fix the gate in your driveway instead of swapping parts that don’t need swapping, and every job is backed by the 90-Day Done Right Promise in writing. A live person answers the phone in Paradise around the clock, and the person who shows up is background-checked and uniformed. We’re locally owned and owner-operated, and we answer the phone the same way whether it’s a Tuesday afternoon or a Sunday night.
FAQs
No, not when the repair is done to spec. We work warranty-safe on Ghost Controls gear, and we tell you upfront which parts are OEM and which are quality aftermarket before we install anything. If a part is still under Ghost Controls coverage, we’ll say so. Call (888) 292-7536 for an exact quote – estimates are free.
We source both OEM Ghost Controls parts and quality aftermarket equivalents, so you usually don’t have to order anything yourself. If the part you need is OE-only, we’ll tell you and get it. As an independent Ghost Controls service provider, we’re clear about what’s factory and what isn’t. Call (888) 292-7536 to check availability for your model.
More often than not, it’s the gate, not the motor. A sagging hinge, a bent rail, or a dragging roller makes the operator read an obstruction and stop. We diagnose the frame and hinge post before blaming the unit, and repair on site with welding where it’s needed. Call (888) 292-7536 – a free second opinion on any written estimate is always available.
A live person answers around the clock, and we schedule Paradise repairs as quickly as the calendar allows – often same day for a gate that won’t close or latch. Call (888) 292-7536 and we’ll give you a real window, not a maybe.
Repair, in most cases. Ghost Controls operators are built to run a sound gate, and the failures we see are hinge, post, and frame problems – all repairable with on-site welding. We don’t sell you a replacement when a fix will hold. Call (888) 292-7536 and we’ll tell you straight which way makes sense for your gate.
Gate sticking, sagging, or the operator cutting out? Call Gatewood Fence & Gate Paradise at (888) 292-7536 for a free estimate. A live person answers around the clock, we’ll give you a written price before any work starts, and every job is backed by the 90-Day Done Right Promise in writing.
Written by the team at Gatewood Fence & Gate Paradise, serving Paradise and nearby areas.