A Gatewood company - serving Paradise, NV

Ghost Controls Gate Repair in Paradise, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Paradise: What to Know First

We handle independent Ghost Controls gate repair in Paradise, and most jobs we see are diagnosed on the first visit and fixed on the spot, with parts on hand for the common failures. When a part has to be ordered, you’ll know the price and the wait before we start. As an independent Ghost Controls service provider, we’re not affiliated with or authorized by Ghost Controls, but we service their openers the same way we service everything else: repair first, replace only when repair won’t hold.

Call (888) 292-7536

This page is for the Paradise homeowner with a Ghost Controls opener on a driveway gate who’s already dealt with a phone quote that grew legs by the time the truck pulled in. We don’t work that way. You get the price up front, in writing, and the 90-Day Done Right Promise stamped on the job. Call (888) 292-7536 and a live person picks up.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls builds a solid DIY-market opener, which is exactly why we see the same handful of failures over and over in Paradise. Here’s what actually goes wrong, and what we do about it.

  • Control board failure on the single-gate kits (the H-10 and TDS series arms we see most). The symptom is usually a gate that opens but won’t close, or runs a few inches and stops. Nine times out of ten it’s a toasted board from a power surge or a sun-baked control box, not the arm itself. We test the board in place before we sell you one, and when a replacement is needed we use a genuine Ghost Controls board so you keep your warranty intact.
  • Battery and solar charging problems (common on the solar-charged setups). Ghost Controls runs on 12V battery power, and in Paradise’s summer heat a lead-acid battery that would last three years in a mild climate can go soft in eighteen months. The tell is a gate that’s sluggish by mid-afternoon and fine in the morning. We load-test the battery under the actual gate weight instead of guessing, and we’ll tell you if it’s just a loose terminal or a battery that’s genuinely done.
  • Arm mount loosening and gate sag. Most “opener failures” we get called out for are really hinge and post problems. The arm gets blamed because that’s the part making noise, but a gate that’s dropped a half-inch at the hinge post throws the arm out of geometry and trips the obstruction sensor. We check the post and hinges first, weld and realign as needed, then re-set the arm. Fix the panel without the post and you’ll fix it twice.
  • Limit switch and entrapment sensor faults (the safety edges and photo-eyes on the AXO and similar kits). A gate that reverses for no reason is usually a misaligned sensor or a limit that’s drifted, not a dead operator. These are the repairs we do most often on Ghost Controls units, and they’re cheap when they’re caught early. Let them run and you’ll cook the board.
  • Rusted and fatigued hardware, welds, and the arm clevis. The desert swing between hot days and cold nights works gate hardware hard. When a weld on the mounting bracket or a clevis pin fails, the whole arm strains. We weld on site in your driveway, so the gate and the opener stay put, rather than hauling anything off.
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Ghost Controls Gate Repair Process

  1. 1
    You call, a live person answers. No voicemail, no queue. We ask what the gate’s doing, get the model if you have it, and set a window we’ll actually hit.
  2. 2
    On-site diagnostics. We test the board, battery, arm, limits, and sensors in place, and we check the gate’s hinges and post while we’re at it, because the operator is only half the story.
  3. 3
    The parts decision, out loud. If a part’s needed, we tell you whether a genuine Ghost Controls replacement or a quality aftermarket part is the right call for your unit and your budget, and we explain why. No swapping parts that don’t need swapping.
  4. 4
    The repair. Welding, realignment, and hardware work happen on site. If it’s an electrical fault, we fix it to code and keep it warranty-safe.
  5. 5
    The test. We run the gate through full open-and-close cycles, check the safety edges and reverse, and make sure it’s not just working but working reliably.
  6. 6
    The cleanup and the promise. We leave the driveway clean and hand you the 90-Day Done Right Promise in writing. If something we touched acts up, one call brings us back.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Ghost Controls Gate Repair Costs in Paradise

Here’s the honest range for Ghost Controls work in Paradise. Your exact price is quoted and agreed before any work starts, and it doesn’t change at the door.

  • Diagnostic and adjustment visit: typically $75 – $125, and it comes off the repair if you go ahead.
  • Limit switch or sensor realignment: about $120 – $200.
  • Battery replacement (quality 12V): roughly $90 – $160 installed.
  • Control board replacement: around $180 – $320 depending on the model.
  • Hinge, post, weld, and realignment work: $150 – $450 depending on how much the gate has dropped.
  • Full arm or operator service: $250 – $600.

What moves the price is how far the gate has sagged, whether the board’s involved, and how accessible the opener is. Estimates are free, and there’s no trip charge inside the county. Call (888) 292-7536 for an exact quote on your Ghost Controls gate.

Why Paradise Homeowners Call Gatewood Fence & Gate Paradise for Ghost Controls Work

We’re locally owned and owner-operated, and the person who answers the phone is the same person who’ll be standing in your driveway. Our crew has up to 25 years of experience, we’re certified to service nine major gate brands (so if your Ghost Controls sits alongside a LiftMaster, a Mighty Mule, or a DoorKing on the same property, we handle all of it), and every job carries the 90-Day Done Right Promise in writing.

Calls reach a live person 24/7, and the standing offers don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. We repair what other outfits want to replace, and we weld on site instead of hauling your gate away. When a Ghost Controls unit in Paradise needs fixing, we’d rather fix it right than sell you a new one.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (888) 292-7536
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Gatewood Fence & Gate Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch