Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Whitney
We repair gates all over Whitney, and we know what most of them have in common before we even pull up: they’re the original builder gates from the 1990s tracts, and they’re tired. If your driveway gate is dragging, sagging, stuck shut, or won’t open after the last windstorm, call (888) 292-7536 and a live person picks up, day or night. We give you an honest upfront price before any work starts, and it doesn’t change at the door. Most Whitney repairs are handled same day, and every job leaves with our 90-Day Done Right Promise in writing.

Why Gatewood Fence & Gate Paradise Is Whitney’s Preferred Gate Repair Company
We’re locally owned and owner-operated, with a published address and license number anyone can look up. When your neighbor down the block refers us, that’s a name you can actually verify. Whitney homeowners call us back because we fix the gate that’s already in the driveway instead of quoting a whole new one, and because the 90-Day Done Right Promise is stamped on every invoice: if it’s not done right, we come back and make it right. One call, no runaround.
Folks in the tracts off the 89122 corridor don’t have room for a company that answers with voicemail and shows up three days late. We answer the phone with a live person around the clock, and we keep our windows. Whitney is a compact community, and word travels along a shared block wall faster than any ad. That’s fine with us. We’d rather earn the next door down the row than talk about ourselves.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Whitney
Hinge & Post Repair in Whitney
Most of the sagging gates we see in Whitney aren’t a panel problem at all, they’re a hinge-post problem. The original posts on these 25- to 30-year-old tract homes take a beating when monsoon rain saturates the soil and the footing loses its grip, so the whole gate leans and drags. We check post level first, then brace or re-pour the footing as needed before we touch the hinges. Fix the panel without the post and you’ll fix it twice.
Gate Realignment in Whitney
Once the post is sound, realignment is what makes the gate close clean and latch on its own again. A gate that swings open by itself or catches on the strike is telling you exactly where it’s out of square. In Whitney’s packed tracts, a gate that’s off an inch is visible from half the row, so we align the swing and confirm the latch engages before we call it done.
Electric Gate Repair in Whitney
When the operator quits, we diagnose the whole system, not just swap a part. Blowing dust and hard summer sun grind grit into tracks and oxidize builder-grade finishes, and that wear shows up as a gate that stalls halfway or reverses for no reason. We service the major operators, verify safety photocells and loop detectors, and tell you straight whether it’s a repair or a motor that’s genuinely finished.
Automatic Gate Repair in Whitney
Whitney’s windy stretches take a toll on automatic gates with solid infill, because a gust hitting a solid panel puts a load on the posts and the drive hardware that a bar gate never feels. We check rack-and-pinion alignment on slide gates and the arm geometry on swing gates, then reset the limits so the gate stops where it should. If the board or receiver is the culprit, we replace it and leave the operator working the way it was built to.
Need the full range of what we handle? Our Gate Repair team covers locks, welding, rust repair, and everything in between.
Trusted Brands We Service in Whitney
We’re certified to service nine major gate brands, and in Whitney the ones we see most are LiftMaster, DoorKing, and Mighty Mule – usually the original operator the builder installed and nobody has touched since. We don’t claim to stock parts on a truck, because we don’t. What we do is diagnose accurately the first time and order what’s actually needed, which keeps turnaround tight instead of guessing at parts. If your operator is an Elite or a Linear, same deal – we know the platform and we’ll get it running.

Common Gate Repair Problems We See in Whitney Homes
- Hinge-post rot and footing failure after monsoon storms. When saturated ground lets the footing shift, the gate sags and drags even if the panel itself is perfectly straight. That’s where we start, every time.
- Wind-load bending on solid-infill gates. Monsoon gusts hit a solid panel like a sail, and posts that were anchored for a calm day bend or pull loose. Slide gates with rack-and-pinion drives go out of alignment for the same reason.
- Seized latches and rusted bottom rails. Blowing dust grinds grit into every hinge and track, and the intense UV oxidizes builder-grade finishes until the bottom rail is flaking. It’s the Mojave climate doing what it does to exposed metal.
- Operators that stall after a storm. Grit in the track, a bent arm, or a safety sensor knocked out of line will stop a gate cold. We verify the safety devices before we hand the gate back, not after.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Whitney, NV
Here’s what gate repair actually runs in Whitney, in ranges you can hold us to. A hinge and post repair, including sag correction and footing brace, typically lands around $180 to $340. Gate realignment runs $120 to $220. Electric or automatic gate repair, from sensor replacement to control board work, usually falls between $150 and $450 depending on the operator. Rust and weld repair on a bottom rail runs $140 to $300. These are the numbers in this market, and you get the exact price in a free written estimate before any work begins. $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Want a second opinion on someone else’s written estimate? That’s free too.
We Also Serve Cities Near Whitney
Whitney sits right next to a lot of other communities, and we work them all. If you’re over in Sunrise Manor, up in Winchester, or out toward Paradise or Las Vegas, we cover your gate too. Same phone, same live person, same 90-Day Done Right Promise. Find your neighborhood on our Whitney service page and give us a call.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Whitney
It’s the footing, not the panel. Whitney’s 1990s track homes were built with builder-grade gates anchored into soil that saturates and shifts during monsoon season, so the hinge post loses its grip while the gate itself is still straight. We check post level first and brace or re-pour the footing before realigning the gate, because patching the panel without the post just means a repeat call.
Never force the gate – find the keyed release or manual bypass lever on the operator and disengage the drive, then open it slowly by hand. The procedure depends on the brand: most LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite units have a keyed release, and the exact location is in the operator manual. If you can’t find it or the lever won’t budge, call us at (888) 292-7536 and we’ll walk you through it – no charge, no pressure.
Often, yes. Most Whitney HOA rules require a replacement gate to match the neighboring units and approved colors, and a mismatched panel gets flagged within days. That’s why we lean toward exact-match repair over replacement whenever the frame is sound – it keeps you inside the architectural rules and it’s usually cheaper. If a replacement is truly needed, we’ll tell you what to match before you order.
It wears it out faster and in predictable ways. The Mojave sun bakes and oxidizes exposed finishes, low humidity warps wood gates, and blowing dust grinds grit into hinges and tracks so latches seize and bottom rails rust through. Hardware that lasts a decade in a mild climate can fail in half that time here. We clean, lubricate, and treat the metal as part of the repair instead of ignoring it.
Check the safety photocells and any loop detectors before you run the gate again – a gust can knock a sensor out of line and leave the gate closing on a child or a car. Test each sensor and confirm the gate reverses or stops as it should. If it doesn’t, keep the gate on manual until we’ve looked at it. Call (888) 292-7536 for a free estimate and we’ll verify the safety devices on the spot.
Get Your Whitney Gate Fixed Right
Whether it’s a sagging hinge post, a gate that won’t latch, or an operator that quit after the last windstorm, we’ll come look at it, give you a straight price up front, and fix it in the driveway. Free estimates, same-day repair service, and a live person on the phone around the clock. Call (888) 292-7536 for your free estimate in Whitney today.
Written by the team at Gatewood Fence & Gate Paradise.