Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Summerlin
If your driveway gate is dragging, stalling, or stuck half-open, we can help. Gatewood Fence & Gate Paradise repairs electric gates, automatic gates, hinges, posts, locks, and weld-and-rust damage for homeowners all over Summerlin, and we handle the high-end, custom-fabricated gates that this part of the valley is full of. Call (888) 292-7536 and a live person picks up, day or night. We’ll ask what the gate is doing, what operator is on it, and how long it’s been acting up before anyone rolls out.

Summerlin isn’t a place where a generic repair will pass. Between the master-planned HOA envelopes and the ornamental iron that defines so many of these homes, a gate problem here is often a spec-matching problem as much as a mechanical one. That’s the kind of work we do best.
Why Gatewood Fence & Gate Paradise Is Summerlin’s Preferred Gate Repair Company
We’re locally owned and owner-operated, and we’ve been at this since 2001. That matters to Summerlin homeowners who’ve already been through the national outfit that quotes one price on the phone and charges another at the door. Upfront pricing is the promise, not a footnote: the number you agree to is the number you pay, and the 90-Day Done Right Promise goes on every job in writing. If something isn’t right, one call brings us back.
Our technicians have up to 25 years of experience, and they carry the product knowledge to work on the exact operators Summerlin homes run – LiftMaster, FAAC, DoorKing, Elite, Mighty Mule, and the rest of the nine major brands we’re certified to service. We repair instead of replace whenever repair is the honest answer, and we weld on site so your gate stays in your driveway where it belongs. Calls are answered by a live person around the clock, and we keep a free second opinion on any written estimate open to anyone who wants it. The name is on the shop.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Summerlin
Electric Gate Repair
Electric driveway gates in Summerlin take a beating from the sun. Control boards bake, lubricants dry out, and an operator that ran quietly for years starts stalling at the same spot every cycle. We diagnose the board, the motor, the limits, and the wiring before we touch a part, and we tell you plainly whether it’s a repair or a replacement. On underground and overhead slide operators, we also check the safety edges and photocells, because a gate that closes on a car or a kid is a liability no homeowner should live with.
Automatic Gate Repair
Automatic swing and slide gates across 89135 are usually paired with LiftMaster or FAAC arms, and when one starts dragging and stalling, the operator is often the innocent party. The real culprit is frequently a hinge post footing that’s loosened in Summerlin’s expansive desert soil. We confirm post movement first, correct the sag or reset the footing, then re-check the arm or rack-and-pinion geometry and test the safety photocell before the gate goes back into service. That sequence is why the fix holds.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle – and that’s where we start. Fix the panel without the post and you’ll fix it twice. On Summerlin’s heavy wrought-iron swing gates, we check the post for movement, reset or re-set the footing when it’s called for, and re-hang the gate so it swings true. On-site welding means a cracked hinge or a failed weld gets repaired in place rather than hauled off to a shop.
Gate Realignment
UV-baked wooden courtyard gates warp out of alignment against their strike posts, and iron gates drift after a footing settles. Realignment is the careful work of getting the gate to close cleanly against its latch without forcing the operator to fight it. Show us the gate closing on its own and we’ll show you where it’s failing. We adjust hinges, strike plates, and stop points so the gate runs silent and latches the first time, every time.
Trusted Brands We Service in Summerlin
We’re certified to service nine major gate brands, and the ones you’ll see most often on Summerlin driveways are LiftMaster, FAAC, DoorKing, and Elite. We don’t stock parts on a truck – we order what the job actually needs and get you a straight turnaround, usually within a few days for common operators and sooner when it’s a repair rather than a replacement. If your operator is older or a brand we don’t list, call anyway. The odds are good we’ve worked on it.
Common Gate Repair Problems We See in Summerlin Homes
Summerlin’s climate and soil create a specific set of failure modes that show up again and again:

- Loosened hinge post footings. The expansive desert soil under Summerlin driveways shifts with the seasons, and a heavy wrought-iron swing gate will sag and drag when its post footing gives. The panel gets blamed. The post is the problem.
- Baked control boards and dried-out lubricants. Summerlin’s 100°F-plus summers and low humidity cook operator control boards and turn grease to powder on underground and overhead slide operators. Heat and UV-resistant hardware and lubricants make the difference between a five-year operator and a fifteen-year one.
- Winter freeze damage on hydraulic arms. The occasional hard freeze in Summerlin seizes hydraulic arms and stresses lesser metals, and a gate that ran fine in October starts groaning in January. We check arms and welds after a cold snap.
- Warped wooden courtyard gates. UV-baked wood warps out of alignment against its strike post, and the latch stops catching. Re-welding and rust-treating iron, and realigning wood, are both on the table – replacement usually isn’t.
The 89135 Advantage: Why Summerlin Gate Repair Is a Spec-Matching Job
Here’s what makes gate work in Summerlin different from anywhere else in the valley. Summerlin is a master-planned, HOA-governed community, and the architectural committees enforce design continuity across each enclave’s original gate package. So a gate operator or even a latch swap in 89135 usually means sourcing hardware that matches the community’s approved iron finish and style – not just bolting on whatever’s on the shelf. The technicians who do this work routinely keep spec sheets for each tract’s original gate packages, because the tract’s approved finish is the one you have to match. That’s the part nobody tells you when you buy a home behind an HOA gate. A generic replacement part that doesn’t match the finish will get flagged, and a mismatched operator on a custom iron gate can void the design approval the previous owner fought for. Get the spec right the first time and the gate runs for years without a committee letter arriving in the mail.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Summerlin, NV
Honest ranges for Summerlin, based on the work we see here: a hinge or post repair typically runs $180-$420 depending on whether the footing needs resetting; gate realignment runs $125-$300; an electric or automatic operator repair runs $200-$550 for common parts and labor, and higher for a full control board replacement. Lock repair is usually $90-$200. Weld and rust repair on an ornamental iron gate runs $150-$400. The high-end custom iron that defines so many Summerlin homes can push the top of those ranges, and heavier gates always do. Every quote is free, every price is agreed before work starts, and we offer $40 off any repair over $200 – no haggling required. Call (888) 292-7536 for an exact figure.
We Also Serve Cities Near Summerlin
Summerlin sits close to a lot of the valley, and we cover the neighbors too. If you’re in Summerlin proper or just over the line in Spring Valley, Las Vegas, Winchester, or Paradise, we can get to you. Our Gate Repair team treats the whole northwest corner of the valley as one service area, so a quick call is all it takes to find out when we can be out.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Summerlin
Because Summerlin’s HOA architectural committees enforce design continuity across each enclave’s original gate package, and a mismatched finish or operator can trigger a compliance flag. We source hardware that matches the approved iron finish and style – meaning a spec-matching job, not just a hardware swap. Call (888) 292-7536 and we’ll pull the spec for your tract.
The hinge post footing is usually the culprit, not the panel. Summerlin’s expansive desert soil loosens the footing over time, and a heavy iron gate then sags and drags against the ground. We check the post for movement, reset or re-set the footing, then confirm the arm or rack-and-pinion geometry before returning the gate to service. Estimates are free – call (888) 292-7536.
Yes – an automatic gate needs functioning entrapment protection, and we check the safety edges and photocells on every operator we touch. A gate that closes on a person or a car is a serious hazard, and it’s also something an HOA committee will flag. If your safety devices are missing or failing, we can get them back in service. Call for a free inspection and quote.
Summerlin’s 100°F-plus summer sun and low humidity bake operator control boards and dry out lubricants, and the occasional winter freeze seizes hydraulic arms and stresses lesser metals. Heat- and UV-resistant hardware and lubricants make a real difference in operator life here. Call (888) 292-7536 to talk through what your operator needs.
In most cases, yes – re-welding and rust-treating is exactly what we do, and we do it on site so the gate stays in your driveway. UV-baked wooden gates can usually be realigned rather than replaced, and ornamental iron can be welded and treated to keep it going for years. Call (888) 292-7536 for a free second opinion on any written estimate.
Contact Us for Gate Repair in Summerlin
If your gate is stuck, sagging, or just not closing right, call (888) 292-7536 for a free estimate. We’ll be there ourselves, or you can drive to the shop and look us in the eye – the name is on the shop, and the shop is down the road. Upfront pricing, the 90-Day Done Right Promise in writing, and a live person on the phone around the clock.
Written by the team at Gatewood Fence & Gate Paradise.