Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across North Las Vegas
If your gate won’t open, won’t close, or opens when it feels like it, you’re in the right place. We work on gate motors and openers all over North Las Vegas, from the newer subdivisions up in 89084 and 89086 out to the older iron gates closer to downtown. Our team knows this town’s heat, its caliche soil, and its builder-grade hardware, and we carry the parts and the know-how to deal with all three. A live person answers every call, day or night, so call (888) 292-7536 and let’s get that gate moving again.

We’re a repair-first gate specialist. That means we fix what’s in your driveway instead of hauling it off and selling you a new one you didn’t ask for. It also means you get a written price agreed on before we turn a single bolt, and every job comes stamped with our 90-Day Done Right Promise.
Why Gatewood Fence & Gate Paradise Is North Las Vegas’s Preferred Gate Motor & Opener Company
North Las Vegas homeowners have been burned before. Somebody quotes one number on the phone and charges another at the door. We do the opposite. The price gets written down and agreed on before any work starts, and it doesn’t move. That’s not a marketing line, it’s how we’ve run the shop.
Our technicians bring up to 25 years of experience to every call, and we’re certified to service nine major gate brands, including LiftMaster, Linear, DoorKing, Elite, and Mighty Mule. When we roll up to a house in Aliante with a gate stuck half-open in July, we’ve seen that exact failure before and we know where to start looking.
Calls come to a live person around the clock, not a voicemail and not a call center three states away. We keep standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. And when you’re comparing prices down the valley, keep that in mind – a cheaper phone quote often isn’t the cheaper bill.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in North Las Vegas
We handle the whole job, from the motor itself down to the conduit run and the power behind it. Here’s what comes up most in North Las Vegas:
Motor Installation
Putting a motor on a gate that never had one is a different job than swapping a dead operator, and North Las Vegas’s newer tract homes are full of gates that were built manual. That usually means we’re also running power and conduit where the builder didn’t, so the installation is sized for a 110°F-plus summer instead of just working on a mild spring day. A typical motor installation in North Las Vegas runs $1,200 to $2,600 depending on whether power is already there and how far the run has to go.

Motor Repair
Before we replace anything, we figure out why it failed. Builder-grade operators in the newer subdivisions overheat and quit early because they were never sized for this heat, and a lot of the time a repair is all that’s needed. If it’s not, we’ll tell you straight and quote the price in writing first. Repairs usually land between $180 and $550.

Linear Motor
Linear operators are common on the slide gates behind the block walls in the newer communities out toward Tule Springs. They’re good units, but the limit switches drift and the boards collect dust in the heat. We’re certified on Linear and we can usually get one back to running the same visit.

Slide Motor
Sliding gates on rollers take a beating here. When the ground settles on caliche, the track racks sideways and the motor drags until it burns out. We check the track and the post before we touch the motor, because a misaligned gate will eat a new motor just as fast as the old one.
Trusted Brands We Service in North Las Vegas
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters in North Las Vegas because you’ll find all of them here, from a LiftMaster swing operator on a driveway gate in Eldorado to a Mighty Mule on a backyard gate in the 89081 ZIP. We don’t claim to stock parts locally, but we know these brands well enough to diagnose fast and get the right part headed your way. Our Gate Motor & Opener team can tell you what you’re dealing with.

Common Gate Motor & Opener Problems We See in North Las Vegas Homes
Most of what we get called out for here comes down to heat, soil, and hardware that was undersized from day one. A few patterns show up again and again.
- Operator overheating and early failure. Builder-grade units in the new north-side subdivisions aren’t sized for weeks of 110°F-plus days, and they don’t get shade or ventilation. The motor runs hot, the board cooks, and it quits long before it should.
- Phantom safety-sensor trips. These spike after the first big heat waves. The photo-eye optics degrade in the UV, caliche soil heaves the hinge post, the gate shifts, and the beam breaks when nothing’s actually in the way.
- Power and conduit that were never run. Adding automation to a manual gate often exposes a missing power run, which means trenching or a solar setup that has to work harder out here than it would in a cooler climate.
- Hard-used, sun-rotted older iron. The 1950s-to-70s tract housing closer to the 89030 core has older wrought iron and chain-link gates where the hinges wear, the framing rusts, and the operator struggles against a gate that isn’t square anymore.
See the difference
Before
After
Before
After
Before
AfterWhy North Las Vegas’s Fast-Grown Subdivisions Wear Out Operators
North Las Vegas is the fastest-growing big city in the metro, and it shows in the housing. Huge stretches of Aliante, Eldorado, Tule Springs, and Valley Vista went up in the 2000s and 2010s, and the gate operators were builder-grade. They were installed to close a gate during the warranty period, not to run reliably for fifteen summers. A lot of them also lack proper power and conduit runs, so when a homeowner wants to upgrade to something that will actually last, there’s a retrofit to do first: the trenching, the conduit, the correctly sized operator, and the anchorage. This is why the same house can go through two or three operators in a decade while a properly sized one with a real footing lasts far longer. We get into that in more depth on our North Las Vegas page and on the calls that come from the 89084 and 89086 ZIPs every summer.
Here’s how a typical job tends to go. A builder-grade LiftMaster operator on a swing gate starts phantom-tripping its safety photocell after the first 110°F-plus heat wave, and the gate sticks open. The right first move is checking the photo-eye alignment and lens clarity, then inspecting the hinge post for caliche-induced heave that’s knocked the gate out of square and stressed the operator. If the post has shifted, you correct the sag and re-anchor the footing before any motor repair, because a misaligned gate will keep burning out operators no matter how many you put on it. Whether you’re in Aliante, Eldorado, or one of the Valley Vista subdivisions, the sequence is the same, and skipping the post is what causes repeat failures.
Pricing for Gate Motor & Opener in North Las Vegas, NV
We’d rather give you a real number than a shrug. A motor repair on an existing operator in North Las Vegas typically runs $180 to $550, depending on the part and how far the failure goes. A new motor installation on a gate that’s already wired starts around $1,200 and can reach $2,600 or more when power and conduit have to be run to a manual gate. Intercom integration and battery backup add to that. What moves the price most is whether the power run is already there, whether the hinge post and footing need re-anchoring on the caliche, and whether the gate has to be realigned before any of it matters. The estimate is free and it’s written down before we start, so the number on the page is the number you pay.
| Service | Typical North Las Vegas Range |
|---|---|
| Motor repair (existing operator) | $180 – $550 |
| New motor installation (power already present) | $1,200 – $2,600 |
| Power and conduit run for a manual gate | Quoted after inspection |
| Intercom integration | Quoted after inspection |
| Battery backup | Quoted after inspection |
We Also Serve Cities Near North Las Vegas
We also work the cities that border North Las Vegas: Las Vegas, Sunrise Manor, Winchester, and Whitney. The same heat, the same caliche, the same builder-grade operators follow us across those lines, so it doesn’t much change how we approach a job. If you’re just over the boundary, give us a call and we’ll sort out the details.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in North Las Vegas
Because the heat degrades the photo-eye optics and the caliche soil shifts the hinge post, which misaligns the gate and breaks the sensor beam. Once the gate isn’t square, the beam clips the gate itself or the far side of the housing. The fix is usually clearing and realigning the photo-eyes and correcting the post, not just replacing the sensor. Call (888) 292-7536 and we’ll take a look – the estimate is free.
Yes. We install operators on manual gates in Aliante all the time, and the main thing to plan for is the power and conduit run, which a lot of these homes never had. We’ll size the operator for the gate and for the heat, then quote the whole job in writing before we start. Give us a call to set it up.
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. LiftMaster, Linear, DoorKing, and Mighty Mule come up most around here, but we know all nine. Call (888) 292-7536 and tell us what you’ve got.
Usually it’s a sheared drive gear, a stripped arm, a broken chain, or a gate that’s jammed against a shifted post and can’t move even though the motor is trying. In North Las Vegas, caliche heave that racks the gate is a frequent culprit. We check the gate travel first, then the drive hardware. Call us for a free estimate.
That depends on the operator and the electrical work, and local rules can change, so it’s worth confirming with the city for your address. New operator installs with new power runs often need electrical permitting, and safety features like photo-eyes and a proper disconnect are usually part of the deal. We’ll walk you through what applies to your job when we quote it. Call (888) 292-7536.
Whether it’s a stubborn LiftMaster that won’t close or a manual gate in Eldorado you’re ready to automate, we’ll give you a straight answer and a written price. The 90-Day Done Right Promise comes with every job, the estimate is free, and a live person is on the line 24/7. Call Gatewood Fence & Gate Paradise at (888) 292-7536 for a free estimate in North Las Vegas.
Written by the team at Gatewood Fence & Gate Paradise.