Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Enterprise
If your driveway gate stops halfway or your operator groans in the heat, call (888) 292-7536. We know Enterprise – the tract-home subdivisions off Blue Diamond and Decatur, the HOA streets where every gate has to match the design book, the west-facing lots that cook all afternoon. That familiarity is why we can walk up, watch the gate cycle once, and tell you what’s actually wrong instead of guessing. Motor and opener work gets measured and scheduled, not rushed, so the first thing we promise is a free measure and a written price.

Why Gatewood Fence & Gate Paradise Is Enterprise’s Preferred Gate Motor & Opener Company
Enterprise homeowners call us because the name on the shop is a name down the road. Locally owned and owner-operated since 2001, we’ve built a reputation across the southwest Valley on repair-first work: on-site welding, real diagnosis, and a gate that stays in your driveway instead of getting hauled off for parts. We’re certified to service nine major gate brands, and every job carries our 90-Day Done Right Promise in writing – if it’s not right, one call brings us back.
What that means on a motor call is simple. We measure and quote before anything gets ordered, so the number you agree to is the number on the invoice. Seniors and veterans get a permanent 10% discount, there’s no trip charge inside the county, and there’s $40 off any repair over $200. Call (888) 292-7536 and a live person picks up, around the clock.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Enterprise
Whether you’re on a newer HOA street near Silverado Ranch Park or in one of the infill condo communities off Windmill, the work starts with the gate itself. A motor can’t fix a sagging post, and we won’t sell you one that pretends to.
Motor Installation in Enterprise
New operator installs get measured and scheduled – never rushed same-day – because the right unit depends on gate weight, swing or slide config, and whether your west-facing lot will bake the control board. We’ll walk the design review rules with you if your HOA requires a specific unit style, and we quote the whole job in writing before we order anything. Most residential installations in Enterprise land in the $1,400-$2,600 range depending on unit and whether a power run is needed.

Motor Repair in Enterprise
Motor repair is our most common call, and it’s often the cheapest fix. Blowing dust fouls photo-eyes, heat stresses capacitors and control boards, and a bound gate trips the overload clutch long before the motor itself is dead. We diagnose on-site and repair-first wherever we can – a typical repair in Enterprise runs $180-$420, quoted and agreed before we start.

Linear Motor Service in Enterprise
Linear slide and swing operators are common on the side-yard and driveway gates in Enterprise’s planned-community tract homes, and they hold up well when the gate runs true. When they don’t, it’s usually a limit switch, a worn gear, or a rolling carriage that’s out of alignment. We service Linear units on-site, and we can usually tell you what’s wrong before we touch a screwdriver.

Slide Motor Service in Enterprise
Sliding gates on rails take a beating from blowing dust and flash-flood grit, so the carriage and track often need attention before the motor does. A slide motor service in Enterprise typically runs $220-$480, and it includes track cleaning, limit adjustment, and a safety check on the reversal and photo-eye system. If the rail is bent or the footing has shifted, we say so up front.
Trusted Brands We Service in Enterprise
We service DoorKing, Elite, Mighty Mule, LiftMaster, and several other major gate brands – certified and familiar with each one’s quirks. We don’t claim to stock parts locally; we order what your gate actually needs, which is why some jobs take a few days and come out right instead of getting jury-rigged with a generic replacement. If you’re not sure what brand your operator is, read the label on the housing or snap a photo and we’ll identify it on the call.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Enterprise Homes
- Summer heat and UV kill operators on west-facing lots. In Enterprise, a sun-baked automatic drive gate on the afternoon side of the house runs hotter than one in shade, and the control board or battery often fails first. That’s a recurring summertime call, not a fluke.
- Blowing dust blocks safety photo-eyes. Dust drifts settle on the lenses and the gate reverses intermittently or refuses to close – a five-minute cleaning fixes more of these than any part swap. We check the optic alignment every visit.
- Flash-flood saturation shifts hinge post footings. After a monsoon downpour, a gate that was true last week sags, the operator strains against it, and the clutch trips. The fix is re-leveling the footing and correcting the sag before the motor is adjusted.
- Wind load bends solid infill gates. A big wind gust against a solid-fill gate frame misaligns it, and the operator binds because it’s now pushing a crooked gate. Correct the frame first, then reset limits.
Pricing for Gate Motor & Opener in Enterprise, NV
Rough numbers so you can plan, and the actual price is quoted and agreed in writing before any work starts. A typical motor repair in Enterprise runs $180-$420. Slide motor service runs $220-$480. A battery backup install runs $260-$520, and intercom integration for a keypad or video entry runs $350-$750 depending on wiring. A full new operator installation runs $1,400-$2,600. What moves the number: gate weight, whether a power run is needed, HOA design requirements, and whether the post footing needs work. There’s no trip charge inside the county, estimates are free, and if you’ve got a written quote from someone else, we’ll give you a free second opinion on it.
We Also Serve Cities Near Enterprise
If you’re just outside Enterprise, we cover the surrounding towns – Spring Valley, Paradise, Winchester, and Henderson. Same measure-and-quote routine, same 90-Day Done Right Promise, same live person on the phone. If you’re not sure whether your address is in our area, call us and we’ll tell you straight.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Enterprise
Most residential operators have a manual release lever or key on the housing that disengages the drive so you can push the gate open by hand. Find the lever before you need it – during a monsoon outage is not the time to read a manual – and test it once a season with the operator off. On a slide gate, the gate may be heavier than you think, so have someone help and never put hands near the rollers. If yours won’t release or you can’t find the lever, call (888) 292-7536 and we’ll walk you through it.
Enterprise summers hit 105-110°F, and that cooks the battery, control board, and photo-eye sensors on any gate that faces west. UV degrades the plastics and seals while the heat stresses the electronics, so the failures cluster in June through September. If your gate acts up every summer, a battery backup system and a shade or repositioned control box often fix the pattern. Call (888) 292-7536 for a diagnosis before the next heat wave hits.
Usually no – HOA architectural rules in Enterprise’s newer southwest Valley subdivisions often dictate the exact gate style and finish, so a replacement has to match subdivision design review standards. That means a technician can’t drop in a generic iron gate; the replacement needs to match what was approved. We handle the mechanical side and can flag what your design book is likely to require. Call (888) 292-7536 and we’ll scope the job honestly.
Automatic residential gates in Enterprise need functioning photo-eyes, a reversing mechanism, and clear signage – the same basics required across the Valley. In practice, the photo-eyes are what fail most often here because blowing dust settles on the lenses. We test the reversal and photo-eye alignment on every service visit so a stuck sensor doesn’t become a stuck gate. If yours hasn’t been checked in a year, call (888) 292-7536.
Dust settles on the photo-eye lenses, fills the track and carriage on a slide gate, and works into the operator housing, and that’s what causes most of the intermittent “it works, then it doesn’t” complaints in Enterprise. A quick lens cleaning and track blowout resolves a lot of them, and a seasonal check keeps the rest from getting worse. If yours has been acting up since the last windy stretch, call (888) 292-7536.
If your gate is sagging, your operator is straining, or the last storm left you pushing it open by hand, let’s take a look. We’ll measure, quote you in writing, and tell you straight what it needs – and if a repair is cheaper than a replacement, you’ll hear that first. Call (888) 292-7536 for a free estimate. The team at Gatewood Fence & Gate Paradise answers around the clock, and the 90-Day Done Right Promise is on every job we do.
Written by the team at Gatewood Fence & Gate Paradise.